-
1. When the shoes are dirty, you can gently brush them with water dipped in detergent, then rinse them with water, and place them in a ventilated and cool place to dry them to avoid direct sunlight and exposure. Do not use heating or open flame for drying, so as not to cause aging, glue opening, fading and serious deformation. Improper care methods such as excessive direct sunlight and hot air from hair dryers can reduce the service life of shoes. It cannot be soaked for a long time when washing, and the general soaking time should not exceed 20 minutes.
Leather shoes should not be soaked in water;
2. If it is stored for a long time, the shoes should be brushed and cleaned first, and then placed in a cool and ventilated place after drying, so that the shoes have enough time to dry to avoid mildew. It is best to prop up the inside of the shoe with a paper ball or shoe support to avoid serious deformation. Dry the toe with the toe toe facing down and the sole facing the wall at room temperature to prevent water from soaking into the midsole foam material; (Because the foam material does not dry easily, it is recommended not to lay wet shoes flat.)
3. Do not use too hard brushes or use too much force in the process of wearing or brushing, and do not use nails or sharp tools to pick the corners of these printed patterns. After wearing for a period of time, there may be some small cracks on the surface of some patterns (especially the parts that are often twisted), which is normal;
4. Athletes who train every day or enthusiasts who exercise regularly should prepare more than two pairs of sports shoes for replacement; Nylon mesh and faux tanning on running shoes are relatively easy to maintain and can be washed by hand, preferably not in a washing machine or soaked in water; Separate shoes and laces and wash with mild soap and laundry detergent. When washing shoes, take out the insole, gently scrub with a soft brush, and finally rinse it again;
5. In order to achieve a satisfactory wearing effect, please treat the shoes you wear fairly. Remember not to wear regular jogging shoes or walking shoes for strenuous sports such as football and basketball. At the same time, but no kind of sneakers can come into contact with sharp objects.
-
Brush with toothpaste, and wrap another layer of toilet paper when drying so that it will not turn yellow.
-
Separate shoes and laces and wash them with neutral soap powder. When washing shoes, take out the insole, gently scrub with a soft brush, and finally rinse it again;
Tip: Soak your washed shoes in diluted bleach for about 30 minutes. If you don't have time, you can apply white shoe powder to your washed shoes, or you can use white chalk instead if you don't have white shoe powder. It's just that you can't bask in the sun, because it will turn yellow.
In order to avoid being yellowed, you can spread a layer of white toilet paper on the powdered wet shoes, which can absorb water and float the yellowing on the paper.
-
Hello, glad to answer for you. It is recommended to add some white vinegar to soak the small white cloth shoes when washing, but not to soak for too long, otherwise it is easy to open the glue, and then in the process of brushing, you can use a special lack of stupid shoe soap to scrub and wash, and finally when drying, you must apply a white tissue to dry in the sedan car, otherwise it will leave sunburn marks in the drying process, so that it will be washed in vain. In fact, there are many ways to wash small white shoes, but the most important thing is to wash them as soon as they are dirty in the usual process, and it is not easy to wash them down if they are washed for a long time.
I hope mine can help you.
-
1. Soak in vinegar in water: you can soak the canvas shoes in water and then clean, remember not to soak for too long, if you soak for a long time, the shoes will be degummed, greatly reducing its service life. If you are washing white shoes, you can put a little white vinegar when soaking, white vinegar has a certain whitening effect.
2. Wash shoes with toothpaste: use a discarded soft-bristled toothbrush to dip some toothpaste and gently wipe it on the surface of the shoes, which will make it easier to dispose of the dirt carefully. And the fresh smell of the toothpaste can also remove bacteria from the inside of the shoes.
Especially for white shoes, toothpaste also has a whitening effect.
3. Wrap shoes with paper towels to dry: After the shoes are washed and brightened, they should be placed in a ventilated and cool place to dry, remember to wrap them in white toilet paper and wrap them in a wide reed chain. When we wash, some detergents are not easy to rinse clean, and the surface of the shoes will leave yellow marks after the water evaporates.
After cleaning, when the wet ants are called, wrap a layer of toilet paper, the toilet paper becomes the surface of the shoes, and the marks are left on the toilet paper, and the shoes are bright and white.
-
You can use white vinegar beer dish soap in a 1:1 ratio, so that white shoes are most effective.
Method. 1.Open "Settings - General - Backgrounder Refresh", select Turn off Refresh, PS: In fact, turning off Refresh does not affect message receiving; >>>More
When accelerating, use the shortest time to accelerate to the required speed, and then fix the throttle to maintain the speed, that is, when you need to accelerate, just press the throttle to the end. It's all electronic throttle, and grinding is the most fuel-intensive.
Tiger 3578 Hello!!
Know how to get the value of wealth: >>>More
Not everyone thinks it's okay to be "ruthless" Only "ruthless" people can achieve a great career I don't know, people who can really achieve great things have a kind character There is nothing wrong with meek people As you said The heart is as soft as grandma, which is the best essence of a person There is no harm, you don't have to worry, it will affect your future It's just that people must have a degree to do things Grasp the degree well, and you will succeed! Be kind when you should be kind, and be kind when you shouldn't tolerate it!
It's just that the memory has been added, and it hasn't changed. >>>More