My computer XP system, only light area, no soft area, I want to use ghost as a backup, but how to en

The current installation disc basically has a boot function, with a ghost tool, as long as the motherboard is set to the optical drive to boot, put it into the boot disk.

Back to the landlord:As long as you can enter the dos and open the ghost software with the command to back it up, it's the same.,I don't know what your 98 installation disc looks like.,Just come out a: OK This way you can enter the disk where you put the ghost.。

You can also back up your system in the Windows environment.

Or you find a Rising Antivirus Disk.

You can access DOS at the time of restart

Usefulness of the Software. In the case that the installed system does not have DOS, load pure DOS for Windows 2000 XP 2003ntfs partition is supported, and ghost is updated.

**A virtual floppy drive, a DOS floppy drive image file (including, you can start DOS when you start 2000 XP, and Ghost, you can read the NTFS partition.)

Just as effective. You can use it with confidence.

2 Select the items before entering the system according to the modifications it taught above.

3 You can choose to go into the backup there when you boot up, and use ghost as a backup.

First of all, now that ghost has been completely replaced, few people use it, although it was a boutique software n years ago.

XP has a backup feature on its own. A simple thing doesn't have to be complicated!

You turn on the computer and hold down the del key and then a blue screen font will appear, and you will find that there are generally three options for booting (resolution, indicating (start from cd. Boot floppy disks start from a disk), and you choose to boot from a disc! Then press f10 to save the system interface that you want to install, second-hand click to install it, hehe.

To make PE, the specific production method.

Install one-click restore to get ghost backup.

You don't need to use DOS directly with Genie or USB flash drive system.

Is there also a "start" and "program" in it? , that can only suggest that you change to a specific PE, such as the PE of the disc tape

You can do it all over again, or you can install one-click backup software separately, which doesn't rely on the system's built-in functions, which is also very powerful.

Start the computer with a CD-ROM, USB flash drive or floppy disk that can boot the system, and run the ghost command directly to recover it.

1 After selecting "One-click backup system", it prompts "Restart" 2 Select "Yes" to restart the computer.

3 The computer will enter the DOS real mode and automatically select the ghost software and automatically select the backup software, there are two confirmation prompts in the middle, if you don't understand, let him automatically help you choose, and wait for ten seconds to enter the backup.

4 After backing up, reboot the computer to complete the backup. Generally, backup files are saved in the "ghost" folder or "ghost" in the last partition of the hard drive"Folder" (There may be hidden properties, if you want to see it, set it in the "Folder" option in the "Control Panel".) 1

After selecting backup, the computer will prompt whether to restart, and after selecting restart, it will not enter the system, but directly back up the system in the DOS interface. The backup system image is placed in the hidden folder 1 of the last partition of the hard disk, and the image name is about half the size of the system disk! After the backup, the boot item of one-click ghost will appear, and you can restore the system by entering the boot item!

This is the software running itself.,No need to enter the cmd window.,Click on the backup after the machine will prompt you whether to restart.,After restarting, the system files will be automatically backed up.。

You can back it up directly, you don't need to go into DOS

By default, it will be backed up to the backup of the D drive, and the hidden file option will be turned on, and you can see it.

The system will automatically restart and enter the backup phase.

This one is simple.

You move the host to the computer repair place, and they have an external optical drive there.

Can reinstall the system for you.。。

It's not a big deal, it's simple!

Go to the next ghost version of the xp system on the Internet, go to the computer to find a "one-click ghost hard disk version", and put the gho file and the one-click ghost hard disk version file into a directory. Just run the one-click ghost hard disk version, and you can look at the instructions at the next one-click ghost hard disk version.

Install a DOS toolbox, divide the hard disk into a D disk, you can use a lot of tools, and then go to the next ISO system disk on the Internet, and then reinstall it to enter the DOS. It is recommended that the entire optical drive is preferred, and it is not expensive. It's best to back up your system.

Start the computer with XP Tomato Garden CD, enter the installation system interface, and select the above version such as or.

1. Partition backup.

There are two ways to use ghost for system backup: the entire disk and the partition. Click the local item in the menu, and there are 3 sub-items in the pop-up menu on the right, where disk means to back up the entire hard disk (i.e., clone), partition means to back up a single partition of the hard disk, and check means to check the hard disk or backup files to see if the backup or restore failure may be caused by partition or hard disk corruption. Partition backup is useful as an individual user to save system data, especially when recovering and copying system partitions.

Select the local partition to image menu, and the disk selection window will pop up to start the partition backup operation. Click on the white hard disk information bar in the window, select the hard disk, enter the window, and select the partition you want to operate (if you don't have a mouse, you can use the keyboard to operate: tab key to switch, enter key to confirm, arrow key to select).

In the pop-up window, select the directory path of the backup storage and enter the name of the backup file, noting that the name of the backup file has the suffix of GHO. Next, the program will ask if you want to compress the backup data, and give you 3 options: no means no compression, fast means that the compression ratio is small and the backup speed is faster, and high is the compression ratio is high but the backup speed is quite slow.

Finally, select the yes button to start the backup of the partitioned hard drive. Ghost backups are fairly fast and don't have to wait long, and the backup files are stored in a set directory with the gho extension.

3. Backup and restore.

If the partition data backed up in the hard disk is damaged, cannot be repaired by general data repair methods, and the system cannot be started after being damaged, you can use the backup data to completely restore the data without reinstalling the program or the system. Of course, it is also possible to restore the backup to another hard drive.

To restore a backup partition, select the menu Local Partition from Image in the interface, select the restored backup file in the pop-up window, then select the restored hard disk and partition, and click the yes button.

That's it!

You can install a one-button ghost and then boot it on.

Now it's all one-click ghost, no need to operate too much!