What happens if high voltage electricity leaks into the river?

Updated on technology 2024-04-01
22 answers
  1. Anonymous users2024-02-07

    Animals will be fatally injured. If the high-voltage electricity leaks into the river, then the animals in the river will be injured by the high-voltage electricity, which will lead to death.

  2. Anonymous users2024-02-06

    Almost all the plants in the water extend everywhere.

    Since the ground is a bad conductor and resistance, the high-voltage dedicated wire will be discharged through the ground to form a loop and form a voltage around the grounding point from far to near. The size of the span determines the step voltage. The range in which the step voltage reaches the shock value is much larger than the range in which an arc can be generated.

    Therefore, people and animals must stay away from this situation!

  3. Anonymous users2024-02-05

    Hydro conducts electricity to form a circuit with the earth, and an electric current is generated. Then there must be electricity in the surrounding water. If there is a character nearby, it will definitely be life-threatening.

  4. Anonymous users2024-02-04

    Then the fish in the river must have been electrocuted, because high-voltage electricity is very dangerous.

  5. Anonymous users2024-02-03

    There is a certain range of leakage, and the control room will automatically detect it, and the leakage will trip directly, just like our home, and now it is very advanced, these are not problems.

  6. Anonymous users2024-02-02

    The high voltage cap of the CRT TV will ignite the ground when it is damp, generally please keep it dry to avoid damaging the machine, do not try to touch the high-voltage electrodes in the work, it will form an electric shock to the human body, how serious it is I don't know.

  7. Anonymous users2024-02-01

    No leakage, it's okay, leakage will electrocute people, what do you say will be the consequences? It's to say goodbye to this beautiful world.

  8. Anonymous users2024-01-31

    High voltage is dangerous, stay away and do not play nearby.

  9. Anonymous users2024-01-30

    1. The high-pressure package is generally responsible for the ignition of one cylinder, and there are also responsible for two, if the ignition coil is broken, then the corresponding cylinder can not work, and the most obvious symptom is the acceleration weakness, accompanied by shaking.

    2. If the ignition energy provided by the high-voltage package on the car is less (leakage), then the engine may also shake when idling;

    3. Of course, the engine has a monitoring system, if the high-pressure package is broken, at this time you can see the engine fault light on the dashboard, which is actually to remind you of the failure;

    4. Furthermore, if the high-pressure bag of the car is broken, and the corresponding cylinder is also on strike, then the mixture in the cylinder cannot be burned, and finally it can only be sent away by the exhaust pipe, but the mixture is not the object of three-way catalytic purification after all, so it will eventually adhere to the three-way catalysis, causing blockage;

    5. It doesn't matter if an ignition coil strikes, if the other buddies also take a break, then the power of the car will be wasted, and the end result will be that the car will go abruptly until it turns off.

  10. Anonymous users2024-01-29

    The ignition system components of the car mainly include: ignition coil (high-voltage package), distributor, high-voltage wire, etc., according to the different emission standards, the ignition coil is basically an indispensable component in the new and old cars (taking gasoline vehicles as an example), providing a certain amount of high-voltage energy for the ignition system of the car, and igniting the mixture after the spark plug (gasoline vehicle).

    Depending on the design of the car model, when the ignition coil fails, the following fault phenomena may be caused:

    1) Abnormal ignition and poor engine condition;

    2) The ignition coil is burned, and there is no high-pressure fire.

    3) Abnormal circuits, resulting in short circuits and open circuits in other parts or electrical facilities.

    4) ECU burned or lines and related electrical appliances burned.

    5) Acceleration (acceleration) weakness.

    6) The engine shakes or is accompanied by the possibility of body shake during driving.

    7) Fire caused by leakage sparks is possible.

    8) Do not rule out the possibility of failure in other aspects.

    The specific fault results are subject to the actual vehicle test results.

  11. Anonymous users2024-01-28

    Obviously the power is not enough, the engine is earthy, and it will lead to the failure of other electronic components and leakage after a long time, so it is better to deal with it earlier, replace the high-voltage bag, and then check whether the spark plug is good.

  12. Anonymous users2024-01-27

    In terms of driving, you can feel the lack of power, and even some shaking, high fuel consumption, and safety, there are ** hidden dangers, and there is a point that may cause damage to other sensors.

  13. Anonymous users2024-01-26

    The high-voltage line is disconnected in the case of electricity, depending on whether there are important users using electricity, if there are important users in use, such as the hospital is doing surgery, or the computer data is not saved, and the steelmaking furnace is working,......etc., the consequences can be imagined. If there is no user use, the impact will naturally be very small, and there will be no aftermath of Zheng Zheng.

  14. Anonymous users2024-01-25

    There is a lightning protection wire on the top of the high-voltage transmission tower and the grounding wire of the tower connected to enter the earth, if once the lightning strikes are encountered, the grounding wire is introduced into the earth, so if the grounding wire is damaged, the lightning can not be released if the lightning strikes can not be released, which will cause the accident of the transmission line.

  15. Anonymous users2024-01-24

    There are no regulations that prohibit the steel bars of the tower foundation from being connected to the grounding wire. Such a connection should be no problem, and the design specification allows the use of steel bars from ordinary poles (not prestressed) as a coupling between the cross arm and the grounding device. However, it is not advisable to replace the grounding device with the steel bars of the tower foundation.

  16. Anonymous users2024-01-23

    Hello: Any electrical equipmentProtect the grounding wireBreak the circuit, it will be [Loss of protectionThe ...... of the function

  17. Anonymous users2024-01-22

    Not only will there be no electricity, but it will also cause accidents, and those whose children are still in the subway will not be able to get out.

  18. Anonymous users2024-01-21

    It will electrocute and hang up children who are idle and playing near the tower.

  19. Anonymous users2024-01-20

    Plastic is an insulator and will not be electrified!

  20. Anonymous users2024-01-19

    Plastic is non-conductive and will not be electrified!

  21. Anonymous users2024-01-18

    It will be electrified, and it will also emit a faint light. At night, you turn on the electric mosquito swatter and take a look.

  22. Anonymous users2024-01-17

    If it is a high voltage of tens of thousands of volts, the ceramics with the best insulation performance cannot be blocked. Didn't you notice that the high-voltage wire does not have an insulating layer (sheath)?

Related questions
13 answers2024-04-01

The equipment used for the test of high-voltage electrical equipment includes: mass loss measuring instrument, capacitance and inductance detector, transformer comprehensive tester, DC high-voltage generator, megohmmeter, arrester resistive current tester, switch mechanical characteristics tester, AC-DC dual-purpose voltage divider, underground lead conduction tester, relay protection test device, loop resistance meter, clamp phase meter, DC resistance tester, insulation resistance tester, test transformer, ground network comprehensive tester, meter calibrator, triple frequency voltage generator, Current transformer error analyzer, high current generator, etc.

9 answers2024-04-01

10kV with a length of 500m and below

Power cables. with 2500v >>>More

8 answers2024-04-01

First of all, it is necessary to clarify the concept that the electric field is not generated by the current, but by the voltage, and the alternating voltage forms the electromagnetic field. The greater the voltage, the stronger its ability to break down the medium (air), and the easier it is to establish an electric field around the conductor, because this electric field is alternating, it is easy to magnetize the conductor within the electric field range, and take on the charge, in the electric field, the charged will be subjected to the electric field force. >>>More

7 answers2024-04-01

a) The cooling pipeline of the high-voltage motor is damaged, resulting in the loss of relevant coolant inside the pipeline, and eventually the temperature of the high-voltage motor rises sharply and fails; >>>More

9 answers2024-04-01

When a capacitor is put in, it will generate an inrush current that is more than 5 times greater, and unless a larger reactor is added, the inrush current may cause a quick-break protection operation. If it is a trip caused by the inrush current (the input is tripped instantly), the inrush current will be greater if the reactor is removed, so it is not recommended to remove the reactor, and the setting time limit of the superior circuit breaker can only be appropriately adjusted in this situation; If the capacitor trips after a few seconds of input, it should be considered that it is caused by harmonic resonance, and the reactor can be removed.