What should I do if the toilet is seen by a rubber band, and what should I do if the toilet has a ru

Summary. Kiss I'm glad to answer for you, my answer is as follows: Kiss, the toilet dropped an eraser Here's how:

First use the simplest way to add water to the toilet, use the momentum of the water to put the leather vibrator on the toilet mouth and press hard, or you can use the caustic soda mixed with boiling water to pour into the toilet, the resulting chemical reaction will corrode the rubber, and you can flush it after ten minutes. If the method is more difficult to clean, you can only use a knife to cut off the glass glue at the bottom, and then the toilet has been opened, if you can, take it out with pliers, if you are stuck in the reverse water bend, you can only cut it with a corner grinder, and you can use it with glue after taking out the item, this method is best to find a professional master.

Dear Kiss I'm glad to answer for you, my answer is as follows: Dear, the toilet dropped a rubber method as follows: first use the simplest way to add water to the toilet, use the momentum of the water to put the skin vibrator on the toilet mouth and press hard Mu Dan, or you can use the caustic soda mixed with boiling water to pour into the toilet, the resulting chemical reaction will corrode the rubber quickly, and it can be flushed after more than ten minutes.

Method 1 is more difficult to clear Chi Tangerine, you can only use a knife to cut off the glass glue at the bottom, and then the toilet has been opened, if you can, take it out with pliers, if you are stuck in the anti-water bend, you can only cut it with a corner grinding machine, and you can use it with glue after taking out the item, this method is best to find a professional master.

There is actually not only one way to unclog toilet paper, there are many kinds. All roads lead to Rome, and here are a few ways I think they work.

1. Fill some hot water in a basin, the water temperature does not have to be very high, rub some soap and then put two spoons of laundry detergent in it, stir well. It must look like the back limb is very slippery.

2. Put the round mop in the toilet, and then pour the debugged water into the toilet, and the mop needs to be twitched up and down in the process of pouring water, just like washing the mop.

3. Don't pour all the water in the basin at one time, and pour it into the toilet in moderation.

4. Repeat step 2 to know where to rush down.

5. If you can't get it done for ten minutes, then you will be declared a failure. But you can also try the following.

If the method just said is not easy to use, there is a method below, and now we want to talk about the dun cloth method.

1. First of all, use a mop to put water in the toilet, like the toilet, to ensure that the water bar cloth is submerged.

2. Try to stuff the toilet bowl with a cloth net, and then lift the cloth as quickly as possible to suck out the toilet paper in the toilet bowl with the pressure of water.

3. Repeat steps 1 and 2, if there is no effect after 10 minutes, then try the following methods.

Method 3 is an integration of several methods, if this article of toilet toilet paper blocked dredging methods are not good, then you can really only pay for professionals to dredge.

1. Find a long water pipe, connect the tap water pipe at one end, and align the toilet mouth with the other end, and use the pressure of tap water to flush and dredge the clogged toilet toilet and eliminate raw paper.

2. Go to the grocery store to buy a manual dredger, the dredge is cheap, and you can dredge it yourself.

3. If the above methods don't work, it's basically a rhythm that can't be saved. I can only call for help.

First of all, if you find steel bars in the toilet, don't panic. Here are the steps you should take:

1.Do not flush – Never flush the rebar as this may cause it to get stuck or press it inside the toilet.

2.Determine the location of the rebar – if the rebar is just sinking to the bottom of the toilet, then you can try to remove it using pliers or other long tools. But if the rebar is stuck in the sewer, then you need to take the next steps.

3.Find professional assistance - In most cases, it is not easy to get the rebar out, so you need to seek professional help. You can contact a plumbing professional or a service person from a toilet company to resolve the issue.

They may use a variety of techniques, such as the use of jigs or the shearing of rebar.

4.Prevent recurrence - Throwing foreign objects into the toilet can easily lead to problems such as blockages. Therefore, we need to remind everyone to avoid putting any solid objects such as toothpicks, wet wipes, sanitary napkins, etc. in the toilet bowl to avoid encountering this situation again.

In conclusion, if you find rebar inside the toilet, don't panic, take the steps above to remove it, and always be careful not to throw any foreign objects into the toilet bowl to avoid causing similar trouble. What's more, always be on the safe side, no matter the situation.

Plastic skin falling into the toilet is a situation that many people don't want to see, but what if it happens? Below, I give some ways to dispose of the dropped plastic skin for your reference.

Method 1: Use a vacuum cleaner.

In the case that the fallen plastic sheet is not completely submerged by the toilet water, you can try to clean it up with a vacuum cleaner. When choosing a vacuum cleaner, it is recommended to choose a cordless vacuum cleaner because this vacuum cleaner is more flexible and convenient, and has higher accuracy.

Method 2: Use a pipe dredging agent.

If you can't get the plastic skin out with a vacuum cleaner, you can try using a duct unclogant. However, it should be noted that there must be no residual water in the toilet bowl before using the pipe unclogant, otherwise it will reduce its effectiveness. Then, just pour the pipe unclogging agent into the toilet, wait a few hours as instructed in the instructions, and then rinse it with clean water.

Method 3: Use a coat hook.

If the plastic skin has fallen into the toilet and has been flooded, consider using a coat hook to remove it. First of all, you need to bend the hook at an angle, then put it in the toilet, keep fishing for the plastic skin until it is roped out of the toilet, and finally rinse it with clean water.

Method 4: Ask for help.

After the above methods have not achieved effective results, it is recommended to seek professional help to deal with the problem. Professional plumbing repair companies will use different plumbing repair methods to deal with different situations to ensure that no damage is caused to the pipes and the plastic skin is removed.

In summary, although the situation of falling plastic skin can be troubling, there are many ways to deal with it. Of course, in order to avoid this situation, you need to be careful not to drop any plastic bags, plastic skins and other debris into the toilet, which is the most effective way to prevent it.