Ariston water heater hot water how to fill up with water 30

Ariston brand is good, when I was at the scene of Gome tube, I felt that in fact, now the technology is so developed, the quality of the products is not much worse, which accessories ** purchase of the general manufacturers are known, famous brands, the quality of the general will not be too much difference, when it comes to constant temperature, I have a suggestion, because I am an instantaneous water heater, many manufacturers say that he is a water heater is constant temperature,,, normal temperature is a water heater, it is not affected by small flow, that is to say, the water is large, the water is small, As long as you adjust the water temperature of the water heater, it will generally not change, you can, try it this way, adjust the water temperature of the water at 40 degrees, and then turn on the machine, look at the water flow and water flow, and then, artificially put the water into the triangle valve, close the small point, and then look at the reading of the water temperature displayed by the machine, if the reflection is very slow, a few seconds, or the water temperature goes up all of a sudden, and it comes down again after a while, and then it reaches 40 degrees,,, then this water heater is not really constant temperature,,, I finished,

This similarity is the meaning of temperature. It means that as long as the hot water outlet of your water heater can produce water every day, and the water temperature and inlet temperature are similar, it means that the water is full. Originally, the water heater was to bring out the hot water and enter the cold water at the same time, and the hot water was pressed out by the water pressure of the cold water.

If you don't eat cold water, you won't get hot water.

If you don't know the above, can you still understand?

Turn on the hot water outlet faucet and put the water, as long as there are no bubbles, it is a full pipe of water, and the amount of water is similar. Then you can be electrified.

There is not much water in it, how to know that it has been filled, if you are not satisfied with how to operate it can be filled, open the hot water faucet on the manual and release the water, as long as there are no bubbles, it is OK to be full of water flowing in the pipe, and the amount of water is similarly pointed out. ,

A cold water pipe is a short pipe welded to the bottom of the inner tank, while a hot water pipe is a long pipe or a long pipe lined with a pipe that leads to the top of the tank. The water will only come out if it is full or if it is broken and leaking. It makes sense to say that.

Unplug the power supply, close the water inlet valve, open the pressure relief valve, 1. Wrench.

Open the screw of the hot water inlet, 2. Loosen the water inlet and discharge the water from the cold water and remove the safety valve.

3. When the water is finished, connect the spare water pipe to the hot water pipe.

Rinse repeatedly (without drain outlets).

4. With a sewage outlet, directly remove the sewage outlet plug.

5. You can use the shower to meet and rinse the inner tank repeatedly.

There is no dirt, and the water is clear in a clear location.

6. Magnesium rods need to be purchased in advance.

It can be used as a standby with the cleaning agent according to the same model brand.

7. After the water heater is cleaned, return to its position and wait for the water to be full.

8. Plug-in test machine, leakage protector.

Reset switch experiment.

9. The upper water pressure is not easy to be too high, and the water pressure at the appropriate temperature is adjusted.

10. Check whether the connection is leaking, and make sure that it does not leak and call it a perfect end.

The washbasin faucet is filtered, the shower head is cleaned in time, and the water heater needs to be cleaned and maintained from time to time to prolong its service life.

The water temperature of the water heater is not easy to be too high, and the pressure is too high!!

1. Cut off the power supply before cleaning the water heater.

2. Use the impact of water to clean the water heater Before cleaning, drain all the water in the water heater, and then tear off the hardware such as the shower, leaving only the cold and hot water pipes, and then install one end on the faucet, and the other pipe is used for drainage.

3. Repeat several times to clean the water heater.

4. Remove and clean the magnesium rod of the water heater, and remember not to scrape off the coating on the surface of the magnesium rod.

Generally, there is a sewage hole at the bottom of the electric water heater, and you can clean it by opening it and opening the water outlet.

How are you cleaning a water heater? I think in general, when you are a relative, you still have to find a professional to give it to you. Let's clean it, I think it might not work to clean it yourself.

1. First of all, it may be because the safety valve of the water heater is leaking, and then there will be water coming out of the top of the water heater. 2. When the mixing valve of the water heater leaks, there will also be the problem of water coming out of the top. 3. It is also possible that the inner tank of the water heater is not tightly sealed, and then the water will flow out of the gap, resulting in the phenomenon of water coming out of the top of the Ariston water heater.

4. It is necessary to rule out whether it is because the connection between the joint of the water heater and the water tank pipe is faulty, and there will be water leakage at this time. Suggested solutions: 1. When the safety valve of the water heater leaks, be sure to contact professional maintenance personnel to overhaul the safety valve.

2. When the mixing valve leaks, the mixing valve can be replaced to solve the problem. 3. The inner tank of the water heater may leak due to too long time, so it is necessary to replace the new water heater to solve the problem of water coming out of the top of the Ariston water heater. 4. When the connection between the joint of the water heater and the water tank pipe fails, it can be welded by professional maintenance personnel to solve the problem of water coming out of the top of the water heater.

If the water heater is used for a long time, the water pipe joint will have problems due to aging, so it needs to be replaced with new parts to solve the problem.

Ariston water heater usage method is:

When using the electric water heater, turn on the power supply, the indicator light is on, indicating that the electric heating is on, when the water temperature reaches the set value, the indicator light is off, indicating that the power is cut off. In this way, the indicator light turns on and off, indicating that it is automatically holding warm. The electric water heater (storage type) should be filled with water first, and then heated with electricity, and can be used after preheating.

If the pressure of the water source drops or the water stops suddenly, it is best to turn off the power.

Ariston Group, formerly known as Meloni Group, Ariston Thermal Energy Group, was born in the thirties of the last century, headquartered in the northern Italian city of Fabriano, if you trace the history of several famous brands under the group, it has exceeded 100 years, is an international heating and hot water family, specializing in the production of household and commercial heating and hot water products.

How to adjust the Ariston water heater

Winter and summer selection button: This is the knob to select the temperature of the tap water, the temperature of the tap water in the summer is high, and the fire power in the water heater will be automatically reduced. In winter, when the water temperature is low, the heat in the water heater is automatically increased.

Depending on the temperature of the tap water, you can choose between winter (low tap water temperature) or summer (high tap water temperature), this knob does not need to be adjusted often, only needs to be adjusted twice a year.

Water temperature high and low knob: This is a knob to adjust the temperature of the water heater outlet, adjust the knob, you can adjust the water temperature. The knob can be adjusted according to the water temperature, and the temperature selection knob can be adjusted according to the individual's needs for temperature.

If the temperature of the hot water is already high, you can turn this button in a small direction and make it a little smaller.

The above content reference: Encyclopedia - Ariston.

1. How to put water on the Ariston electric water heater.

1. If you need to open the valve of the water heater, it should be noted that there are two valves, one is the valve of wild draft hot water, and the other is the valve of cold water.

2. After opening, a large amount of air will be discharged, and the water heater will be able to fill with water.

3. Turn on the hot water faucet again, if the water can be discharged, it means that it is full.

Second, the Ariston water heater water supply method.

The water on the ordinary water heater is generally to open the valve, and then put the nozzle to see if there is water spraying, and then deal with it according to the operation of the front ridge below.

1. When plugging in the water heater, first open the mixing control valve of the water heater, and put the nozzle to see if there is water spraying out to detect whether the water in the water tank is sufficient.

2. Plug the water heater firmly into the socket. The number displayed on the screen is the temperature of the water in the tank.

3. Press the power switch on the control panel. The display screen is lit and the setting state is entered.

4. In the "Mode" setting item, there are four modes: capacity increase, winter mode, summer mode silver volt, press the mode button to switch. In the corresponding mode, the temperature can be adjusted using the +,- keys on the left side of the screen.

5. In the "Power" setting item, there are three options: 1000W, 2100W, 2500W, press the power button to switch.

1. If it is mechanical, turn the knob, according to the instructions on the panel, if there are many stripes, it is high temperature; If there are fewer streaks, it is low temperature! The approximate temperature indicated by this water heater is 75 (+-5) degrees Celsius! 2. If it is electronic, then it is more intuitive to take the notice, according to the instruction manual, rotate the button to the "set set" mode, press "OK", the left rotation is subtracted, and the right rotation is increased!