How about an Ariston water heater AM50SH1 5MB

Ariston Electric Water Heater** It's not uncommon for maintenance personnel to weigh out of warranty.

A few days ago, the Ariston electric water heater purchased by Mr. Zeng, a citizen, suddenly occurred**, causing hot water to gush, and Mr. Zeng was almost injured. Frightened, Mr. Tsang asked the manufacturer for an explanation and was refused, so he reported the problem.

According to Mr. Zeng, he boiled the Ariston electric water heater at around 5 p.m. on Nov. 26 and took a shower. Just a few minutes after washing, he heard a loud "bang", Mr. Zeng was startled, and instinctively ran out. When I looked back, I found that the water heater had blown a big hole.

The bathroom was "filled with smoke" and hot water was splashed everywhere.

The operator heard that Mr. Zeng's electric water heater was purchased in September 2005 and had been used for 7 years, and immediately said that they would not repair it after the warranty period. After Mr. Zeng's repeated requests, the maintenance station sent relevant maintenance personnel to check. The maintenance staff said that this is a crack in the electric water heater, the inner tank is broken, not **, they have received a lot of such complaints, very common, not a big problem.

However, since the warranty period has expired, it cannot be repaired.

Is it normal for an Ariston water heater to be out of warranty**? Didn't we consumers just buy a time bomb and put it at home? Mr. Zeng said angrily.

It is reported that the Nanchang Consumer Association has accepted the complaint and communicated with Ariston Electric Water Heater many times, but the manufacturer firmly disagrees to compensate. The manufacturer said that the electric water heater had passed the warranty period, and insisted that the electric water heater was cracked and not **, and there was no evidence to prove that it happened at that time, and the responsibility for the accident was difficult to determine. The consumer association said that it had reported to the higher authorities.

The reporter learned from the industrial and commercial department that because of the accident caused by product quality, the seller or manufacturer needs to bear some responsibility. It is understood that there have been frequent safety accidents caused by the long use of electric water heaters recently, but there are no relevant regulations to determine the specific service life of electric water heaters.

The reporter learned that the purchase of electric water heaters, in addition to paying attention to the brand and buying from regular merchants, the electric water heater is better with enamel liners, and at the same time it is necessary to see whether the grounding protection, anti-dry burning, anti-over-temperature, and anti-overpressure device of the electric water heater are in place, and the most important thing is anti-leakage protection, which is closely related to the safety of consumers. When the electric water heater is used for about 8 years, the galvanized copper on the surface of the electric heating rod in the unit has been almost consumed, and other parts have gradually degraded, which is not conducive to personal safety, so it can be considered to be replaced.

1. Button mode: remote control.

2. Water temperature adjustment: 35-75.

3. Three-speed temperature regulation, rapid heating, blue glaze enamel liner, double anti-electric shield protection.

4. Midea's F60-15WB5 can only be heated to 75 degrees.

Access to water. For the first use, pay special attention to opening the hot water valve or hot water faucet of the cold water regulating valve first, so that the air can be exhausted when filling water. Then open the tap water valve leading to the water heater and fill the water heater with water, so as not to open it too much to cause a large impact.

When water flows out of the hot water faucet or nozzle, it means that the water heater is filled with water, and turn off the hot water outlet valve.

Power. After checking that the water supply is normal, set the desired water temperature, then plug the power plug into the socket and turn on the power supply.

Heating. After the circuit is connected, turn on the power switch of the water heater, the heating light is on to indicate normal, and the heating starts. The heating lamp is off and the heat preservation lamp is on, indicating that the heating has stopped and the water temperature has reached the required level.

The above row of buttons is the heating function key used for floor heating and heat sinks, and the heating function has water and return water, and the circulating water formed is self-heating, under normal circumstances, it is not necessary to open the circulation button, and in the case of insufficient pressure in the pipeline process, only need to press the button to pressurize; The exclamation mark below is actually the opening key.

1. The first production looks at the control panel, with a total of four control buttons.

2. Plug in the power supply, click the switch, and the water heater will automatically rise to 75 degrees without setting the temperature.

3. Click the function button, and you can see that the temperature of the control panel can be controlled.

4. Click to adjust, you can see that the pyramid-shaped diagram is circulating up and down; The highest is the highest temperature, the low temperature is the low, and the middle is the medium temperature.

1. Sleep marker. 2. Immediate heating mode. 3. User timing mode. 4. Night-time electricity mode. 5. Beiheng Technology (magnesium rod indication).

I turned to heating mode why the lights flickered and flickered.

Summary. 1. OverviewAriston water heater adopts advanced gas combustion technology, combined with foreign advanced water heater technology, after research and development, Ariston water heater is safe and reliable, stable performance, high efficiency, simple operation, low energy consumption, low noise, fast hot water and long service life. Second, the main technical parameters of power:

Capacity: 50L Voltage Frequency: 220V 50Hz Water Pressure:

Noise: 48db Dimensions: 650mm 450mm 370mm Weight:

22kg gas emission: 20mg m 3. Feature 1, using advanced gas combustion technology, combined with foreign advanced water heater technology, after research and development design, safe and reliable, stable performance, high efficiency, simple operation, low energy consumption, low noise, fast hot water, long service life; 2. Fully automatic temperature control to prevent users from being burned; 3. Adopt high-efficiency and energy-saving thermal conduction technology, with high thermal efficiency and low energy consumption; 4. Hot water is fast, the typical hot water time is only 3-5 minutes; 5. The new safety valve is adopted, which can effectively prevent overpressure, overtemperature and hot water tank bursting, which is safe and reliable; 6. The water outlet is equipped with a splashback plate to effectively prevent water from splashing out; 7. Simple and easy to operate, easy to operate; 8. Adopt efficient and quiet inverter fan, low noise. Fourth, the installation method 1, when installing, should pay attention to the water level of the water tank, when taking over.

Ariston Water Heater Instruction Manual.

Okay, you can check the stuffy instructions on the Ariston Haocha website. You can visit Socks for more information about the product.

1. OverviewAriston water heater adopts advanced gas combustion technology, combined with foreign advanced water heater technology, after research and development, Ariston water heater is safe and reliable, stable performance, high efficiency, simple operation, low energy consumption, low noise, fast hot water and long service life. Second, the main technical reference to the number of power: capacity:

50L Voltage Frequency: 220V 50Hz Water Pressure: Noise:

48db Dimensions: 650mm 450mm 370mm Weight: 22kg Air Emissions:

20mg m 3. Characteristics of the Liang family 1. Advanced gas combustion technology, combined with foreign advanced water heater technology, after research and development design, safe and reliable, stable performance, high efficiency, simple operation, low energy consumption, low noise, fast hot water and long service life; 2. Fully automatic temperature control to prevent users from being burned; 3. Adopt high-spike high-efficiency energy-saving heat conduction technology, with high thermal efficiency and low energy consumption; 4. Hot water is fast, the typical hot water time is only 3-5 minutes; 5. The new safety valve is adopted, which can effectively prevent overpressure, overtemperature and hot water tank bursting, which is safe and reliable; 6. The water outlet is equipped with a splashback plate to effectively prevent water from splashing out; 7. Simple and easy to operate, easy to operate; 8. Adopt efficient and quiet inverter fan, low noise. Fourth, the installation method 1, when installing, should pay attention to the water level of the water tank, when taking over.

Summary. As a new type of valve, it solves the problem of hot and cold water temperature and difficult to adjust the water temperature caused by fast pressure change and fast temperature change in the bathing process.

How to regulate the temperature of an Ariston water heater.

Dear, hello, Ariston water heater uses thermostatic valve, its main division refers to the mechanical thermostatic valve simplification and electronic thermostatic valve, as a cavity with a new type of valve, it solves the problem of hot and cold water temperature and difficult to adjust due to rapid pressure change and rapid temperature change in the bathing process.

1. When the mechanical thermostatic valve is used for the defense beam, the constant temperature water can flow out by simply turning on the switch, and the temperature can be adjusted by holding down the knob when adjusting the temperature, and slowly adjusting the temperature digging pin setting counterclockwise or clockwise.

Pro, 2, if it is electronic, turn the button to the "Settings Settings" mode, press "OK", the left rotation is subtracted, and the right rotation is increased.

Dear, when you use it for the first time, open the water inlet valve (i.e. the cold water outlet) and let the machine fill with water.