How to adjust the time of Foton radio 5

Unplug the battery and it's in place, you see what time it is, and then wait until that time to get it once.

Do you still use the radio? There should be words on it, take a look.

FM: FM radio, which can only listen to local programs; MW: AM system medium wave broadcasting, generally local stations and adjacent areas of broadcasting, provincial stations and ** stations; sw：

AM system shortwave broadcasting. Remote and international radio can be listened to. Shortwave usually has 12 frequency bands and rate ranges, of which China uses 9 frequency bands:

Meter wave frequency (mhz) meter wave frequency (mhz) 11 25.

25 90 31 120 Since the meter band is used in the tropics (due to the poor reception effect of medium and long waves in the tropics), these four bands are not suitable for China, while the 11 bands can meet the needs of China.

In addition, the reception performance of the 11-meter segment is almost entirely dependent on the activity of sunspots, and the reception signal is intermittent and sometimes up to several years, so there are very few international radio stations in this meter segment. Shortwave stations are concentrated in certain frequency ranges and are expressed as integers of the frequency wavelength of that segment. As.

The 775 MHz is called the 31-meter band, and the radio dial is also marked with the word 31 meters, which is convenient for users to select the station.

Specifically, the 49 meters, 41 meters, 31 meters, 25 meters, 19 meters and 16 meters bands can be used for long-distance broadcasting, and have better reception effects. Internationally, radio stations are mostly concentrated in the above-mentioned bands, and at the same time, 49 meters and 41 meters are also very good for domestic broadcasting. Because the 13-meter band is greatly affected by the ionosphere, the 13-meter band is omitted from the 9-band radio.

1. First of all, you need to start the car and turn on the ignition switch of the car.

2. Then you need to turn on the car's radio again.

3. Then press and hold the clock button under the car radio, and the radio will change to time mode.

4. After pressing and holding the clock button continuously, wait until the radio time number jumps, and then adjust the new time through the knob on the radio.

5. Finally, you can adjust the time of the car radio.

1. Turn on the power switch of the radio.

2. Press and hold the volume adjustment knob until the time interface appears. 3. After briefly releasing the button, press and hold it again, and then find that (hour setting) is flashing.

4. Release the button and then turn the volume knob clockwise or counterclockwise to adjust the time, switch to the next adjustment and just short press the volume adjustment knob.

I don't see the time option, this number is the band frequency.

How do you adjust the time on the radio? Isn't there a button there? You can get to the right number of times, and you can squeeze a kilogram of it, just press it to the right number, and correct it.

Of the button switch to regulate the time of the radio, and to regulate the setting to the accurate time.

1.For example, if you want to adjust the time, you must first turn on the audio equipment and then press and hold the set button until the clock flashes, and then press the forward or backward keys on both sides of the power supply to adjust the clock The clock is adjusted, and then press the set button to adjust the minutes After the adjustment is completed.

2.Press and hold the time button, the clock flashes, and the rotation button adjusts Then press the time button shortly, the minutes flash, and the rotation button can be adjusted The summary is, first find the English word of time, and then press and hold still, when the time beats, you can press the up and down or rotary button to adjust.

The summary is that first find the English word of time, and then press and hold it still, when the time beats, you can press the up and down or rotate button to adjust.

It is recommended to check the vehicle's instruction manual, which has a detailed tutorial.

Sometimes the time of the car audio is not accurate, so how to adjust it, this experience will teach you how to adjust the time, method, and steps of the car audio.

Method steps.

After the installation is completed, first turn off the volume of the main unit and power amplifier to "zero" (but if there is an equalizer, the main volume of the equalizer will be adjusted to 75% of the volume position).

Set the frequency crossover point and other functions of the amplifier

The front amplifier crossover switch is set at high pass (high pass or hp), and the crossover switch is set between 80Hz and 120Hz (usually 90Hz is set as the benchmark first).

The rear sound field amplifier is also set to high pass (high pass or hp); (If there is no rear sound field configuration, omitted) the crossover switch is set between 200Hz-400Hz.

The subwoofer amplifier crossover switch is set at the low-pass (Low Pass or LP) crossover point switch between 80Hz-120Hz (the subwoofer amplifier is like the front sound field power amplifier, the crossover point should be combined, if the front power amplifier is above 90Hz, the subwoofer power amplifier must be below 90Hz.) There can be no debugging below 90Hz and above 120Hz, otherwise there will be a sound that misses some audio, resulting in bad audio connection).

6. Reset the bass frequency point booster (EQ bass) of all amplifiers to zero or off.

It looks like you want to hold down one key and then press another.

You know every time you try it, I don't see what it looks like, it's hard to say.

It's better to have **, at least to know which car it is!