Computer Graphics Card Problems Helpful, Computer Graphics Card Problems

Your graphics card "can't last 24 hours under the movie on the blue screen" The person who repaired the computer told you that your graphics card is good, but he can light up the display when he detects it for you, but you can't use it for a long time, the most likely thing is that the graphics card heats, and the time interval of the blue screen is not about the same, for example, the cold machine will crash in about 10 hours after turning on, and the boot time is long, touch a graphics card heatsink with your hand, if the temperature is too high for the human body to touch, then the heat of your graphics card is too high, You can add a fan to your graphics card, or remove the heatsink and apply some silicone grease to the place where the heatsink comes into contact with the graphics card chip, which will also conduct heat. If your blue screen is random and irregular, then it's a problem with your system or driver, update the driver of your graphics card, you can next your model of graphics card driver on the official website of Shuangmin, as for the incompatibility problem you mentioned, it doesn't exist, the parts you use are all brands, and besides, didn't you change a motherboard, isn't there still this problem? So there is no incompatibility.

Hope it helps.

Although your motherboard and graphics card are not mainstream anymore, the Gigabyte board workmanship is still okay!

The problem is easy to find out, the motherboard has an integrated graphics card and it is not long to replace, then you can remove your discrete graphics card and use the motherboard integrated graphics card, if there is no longer a blue screen or the like, it means that it is the problem of your discrete graphics card, if there is still a blue screen phenomenon, you should consider the software question; There is a virus, or several anti-virus software is installed on the computer at the same time.

If it's a problem with the discrete graphics card, I don't think the problem should be very big, at least the chip won't be a problem, otherwise you can't use it for 24 hours before the blue screen, you take a closer look, whether there is a capacitor bursting, or the transistor is broken.

There is also a possibility, that is, there is a problem with the heat dissipation of your computer, such as the power supply, CPU, and fan speed of the graphics card.

You can also try to change the memory.

That's probably it, if you want to fix it yourself, you have to explore it slowly, you can't be in a hurry, good luck, brother.

The flower screen is the problem of the graphics card,And it won't have much to do with the power supply,Master Lu can't measure the temperature, you can feel it with your hands,It's so depressing!

Garbled characters are most likely a memory issue.

Your computer just has a problem with the discrete graphics card and memory, or a problem with the memory slot!

Your problem should be that the heat dissipation of the graphics card is not good, and the standby of the graphics card should be normal below 50 degrees. It's hard to say when it's fully loaded, for mainstream graphics cards such as 9500GT, 9600GT, HD4650, etc., the full-load temperature should be less than 70 degrees normal, for high-end graphics cards such as GTX260+, HD4870, etc., it is normal for a full load to exceed 80 degrees, after all, its GPU computing is very large, of course, it is best not to exceed 90 degrees.

The safe temperature of the current graphics card is below 120 degrees, and exceeding this temperature is dangerous for the graphics card.

Even so, I recommend keeping the current graphics card's temperature range below 50 degrees for standby, 65 degrees for gaming, and 75 degrees for full load. That's perfect.

Of course, it also depends on your room temperature, fan and other factors, generally speaking, your graphics card fan and CPU fan or power supply fan may have problems, fan rotation, does not mean that the speed of rotation is enough, you can test the speed of the fan, if not, learn from me, simply open the front and rear case covers, play games to help heat dissipation, although the method is dirty, but the effect is good, haha

In addition, you have to take into account the indoor temperature I mentioned above, and the impact is not small, you can use the next Master Lu software to monitor the temperature of your graphics card CPU and the speed of the fan

Finally, you open the case to see if there is any debris in the fan. Clean it up.

Graphics card screen: It is recommended that you wipe the gold finger and try to change the fan blade of the graphics card fan (sometimes this is this problem, I have encountered it before).

Soft problem: It is the problem of the driver version, try the next latest version of the driver.

In addition, it is the problem of memory particles or see if the capacitor has burst pulp (if it has not passed the warranty period, take it back to the manufacturer for repair, and after the warranty period, you will find a way to repair it yourself).

Added: Remove the heat sink and see if the memory particles have obvious burns or scratches. Uninstall the driver in safe mode and see if you can enter the system. If you can get in, you can install it in the bar driver, and then see if you can get into the system.

If you can't do it again,,, you can send it for repair.

A friend of mine.

The X1600Pro has a similar problem, although it's not the same brand.

If you check the working frequency of your graphics card, the frequency of the graphics cards of many second-tier manufacturers has reached the highest level. This often results in a lot of heat generation and unstable high-frequency operation.

When your computer is turned on, is it like the computer has just reinstalled the system and has not installed the graphics card driver?

If it is, it must be that the graphics card and the computer are not in good contact...

My friend has a very thin crack on the gold finger of his graphics card, which is not visible to the naked eye, and can be seen with a magnifying glass in the repair shop.

His computer glitch and what you said are not much ...

Sometimes it can't be turned on, but it's okay to leave it for a while, but the same problem will occur again after a while.

In addition, have you tried to see if there is any foreign object in the agp slot on the motherboard, try to brush with a brush, see if it works...

Is the CPU temperature high? Put it to the test!

The motherboard is not fixed, don't loosen it up, this is also easy to have problems.

Is the memory fixed? Is the slot contact good?

How many years has the graphics card been used? Is the graphics card fan still spinning? Is there a lot of dust?

Is the room damp or not? If it's wet, old computers are also prone to problems.

Which system is used for the system? xp ？XP doesn't seem to have a big blue screen.

I've thought about it so much, you're researching, it's not necessarily a problem with the graphics card, it's also possible that there is a problem with other accessories, it's just that you didn't pay attention.

,There's a set display and pretending to be independent.,It's strange if there's no conflict.,My previous motherboard also had a set display.,And I went to be independent, and then the master said there was a conflict.,I changed.。

Blue screen** posted out every time** is it the same?

Passing by playing soy sauce, I love the bloody rivers and lakes.

Common faults of computer graphics cards and how to solve them.

As we all know, the graphics card occupies an important position in the computer, and if there is a problem with the graphics card, it will lead to a series of failures in the computer, causing us a lot of unnecessary trouble. In fact, like some common graphics card problems, we can also solve them by ourselves. Therefore, today U Daxia will talk to you about the common problems and solutions of computer graphics cards.

Fault. 1. The graphics card driver is missing.

The graphics card driver is loaded, and the driver is automatically lost after running for a period of time, which is generally due to the poor quality of the graphics card or the incompatibility between the graphics card and the motherboard, which makes the graphics card too hot, resulting in unstable system operation or crash, at this time, only replacing the graphics card can solve the problem.

Fault. Second, there is no display when the boot is turned on.

For some motherboards with integrated graphics cards, if the video memory shares the main memory, you need to pay attention to the location of the memory module, generally there should be a memory module inserted on the first memory module slot due to the graphics card caused by the boot without display failure, after booting it will generally emit a long and two short beep sound (for Award BIOS graphics cards).

Fault. 3. Computer crash.

This type of failure is generally caused by incompatibility between the motherboard and the graphics card or poor contact between the motherboard and the graphics card. Incompatibility of the graphics card with other expansion cards can also cause crashes.

Fault. Fourth, the display color of the monitor is abnormal.

The reasons for this type of failure are: 1. The failure of the display itself; 2. Poor contact between the graphics card and the display signal line; 3. The color is not normal when running in some software, which is generally common in old-fashioned machines, and there is an option to verify the color in the BIOS, just turn it on; 4. The display is magnetized; 5. The graphics card is damaged, this kind of phenomenon is generally caused by being too close to a magnetic object, and it may also cause the display screen to deflect after magnetization, and the graphics card can be replaced.

Fault. 5. Abnormal noise or patterns appear on the screen.

This type of failure is usually caused by a problem with the graphics card's video memory or poor contact between the graphics card and the motherboard, and it is necessary to clean the gold finger of the graphics card or replace the graphics card.

Fault. Sixth, the display of the flower screen, can not see the handwriting clearly.

The reason for this is generally because the display or graphics card does not support high resolution, and you can switch the boot mode to safe mode when the screen is blurred, and then enter the display settings under win98, click "Application" and then click the "OK" button in the 16-color state. Reboot, delete the graphics card driver in the normal mode of the windows98 system, and restart the computer. Of course, you can also not enter the safe mode, in the pure DOS environment, the file, will be changed to the back, save to exit, and then update the driver in Windows.

If there is a problem with the graphics card of the computer, you can check it from the following aspects.

First, uninstall the driver and install the latest driver of the graphics card.

Second, open the case and unplug the graphics card, clean the socket and the dust inside the case.

Third, it is recommended to go to a neighbor or classmate to unplug the graphics card of the other party's computer and plug it into your own graphics card to see if it can be lit. Confirm that the graphics card and slot are good or bad.

Fourth, which motherboard slot or graphics card is bad.

Hope it helps.

It may be caused by the high temperature of the hardware; CPU graphics card.

It's also possible that there is an issue with the memory module.

In short, it is the cause of poor hardware compatibility.