What does blowout mean!! What does blowout mean?

Buzzwords. It means hot and hot. For example, "the World Cup is over, and the western tour is blowing out", which means that after the World Cup, many people began to look for other ways of entertainment, and western tourism became a popular choice.

Petroleum industry terminology.

Blowout is a phenomenon in which fluid in a formation spews out of the ground or flows into other formations in the well, mostly at the site where oil and gas are exploited. There are many reasons for the blowout: inaccurate formation pressure, low mud density, and reduced height of mud liquid column in the well; Drilling, suction, and other improper measures, etc.

Blowouts are normal, but in the event of a blowout accident, natural gas is spewed out and rubs against the air, making it easy to burn, so it is very dangerous. A common rescue method is to pour dense barite powder into the well to increase the pressure and stop the blowout from continuing to occur.

A blowout is a very taboo accident in oil or petroleum gas exploitation, and mud is injected into the well pipe to balance the pressure of the underground formation on oil and gas when drilling. However, when the underground pressure test is not accurate or the density of the injected mud is too low or the formation pressure suddenly increases, the oil or gas in the well pipe is sprayed out of the ground or into other formations in the well, and the blowout is often accompanied by the ignition of toxic gas, causing greater harm to the environment and people. After the blowout occurs, the method of controlling it is called killing, the main methods of killing are driller kill well and engineer kill method, drilling kill method is to discharge the gas or oil in the well first, and then replace the original too light mud with heavy mud, this method takes a long time, and is often used when the equipment is insufficient.

The engineer kill method is a method of drilling into the well pipe at one time after calculating the amount of mud needed, which is faster, but the material must be ***.

**Jargon. **Affected by a certain negative factor for a long time, the stock price is low or irrational for a long time**, many large and small investors** or unwilling to intervene - once this negative factor is removed, the irrationally undervalued stock price ** will be involved by large and small investors in the first time, resulting in **skyrocketing - this is**blowout.

Refers to in the automotive market:

It means that there are a lot of people buying cars, and the market has reached an unprecedented state.

It means rapid development!

Meaning: A technical term used in the petroleum industry to refer to the phenomenon of uncontrolled and continuous influx of formation fluids (oil, gas and water) into the wellbore, spewing out of the ground or invading other low-pressure horizons.

Reasons: The formation pressure is not accurate, the mud density is low, and the height of the mud liquid column in the well is reduced; Drilling, suction, and other improper measures, etc. Blowouts are normal, but in the event of a blowout accident, natural gas will burn if it hits a spark after a blowout, so it is very dangerous.

A common rescue method is to pour dense barite mud into the well to increase the pressure and stop the blowout from continuing to occur.

The main measures to prevent blowout fires are:

1. Before drilling to the oil and gas layer, check the mud performance to make the specific weight meet the design requirements; At the same time, prepare a certain amount of spare slurry and weighting agent.

2. Strictly control the source of fire, prohibit smoking at the well site, and do not use open flames; When it is necessary to work with an open flame, the approval procedures for starting the fire should be handled and reliable safety measures should be taken.

3. The exhaust pipe of the diesel engine should be cleared of carbon deposits every half month.

4. When using electric drive drilling, it is necessary to install electrical equipment and lines according to electrical regulations, and take necessary relay protection measures to prevent short circuits and avoid overload operation.

5. The boiler of the well site in winter should be installed in the crosswind direction 50 meters away from the wellhead.

6. Before drilling to the oil and gas layer, the blowout prevention device should be installed, and the diameter of the blowout preventer should be consistent with the diameter of the drill pipe; The switch should be flexible and easy to use, and the distance between the valve handwheel and the edge of the derrick base should not be less than 5 meters.

7. In the event of a blowout, the diesel engine should be stopped immediately, the power supply should be cut off, and motor vehicles should be prohibited from entering the well site.

**A blowout means that the stock price is up, and because it has been under pressure for too long, the trading volume is like a flood of water, surging upward. As far as a single ** is concerned, it is the meaning of large-scale breakthrough and large-scale **.

Sometimes it is also used for plates, because of a leading part of the plate, other plates have risen, forming a hundred flowers blooming, blowout. For example, a few days ago, coal stocks had some ** sealing boards, which drove other coal plates to rise sharply, forming a blowout.

When the pressure in the well is greater than the outside atmospheric pressure, the gas and liquid in the well leak out.

In fact, it is a "blowout demand", a blowout, that is, water is sprayed up from the bottom of the well at a very fast speed. What that means it's growing fast.

A blowout is when water is sprayed up from the bottom of a well at a very fast rate. What that means it's growing fast.

Hello, blowout: English name: wbc effect.

**Affected by a certain negative factor for a long time, the stock price is low or irrational for a long time**, many large and small investors** or unwilling to intervene - once this negative factor is removed, the irrationally undervalued stock price ** will be concentrated by large and small investors in the first time, resulting in **skyrocketing - this is the **blowout effect.

This information does not constitute any investment advice and should not be relied upon by investors as a substitute for their independent judgment or decision making based solely on such information.

Blowout: **Affected by a certain negative factor for a long time, the stock price is low or irrational for a long time**, many large and small investors ** or unwilling to intervene, but this negative factor is removed, and the irrational undervaluation of the stock price will be concentrated by large and small investors in the first time, resulting in a sharp rise, which is a blowout. In layman's terms, it means that the rally is fierce, and the volume has risen sharply.

It's like a blowout.

The rally is fierce, and the volume has risen sharply. It's like a blowout.

Plummeting from a high position is called high diving.

Blowout refers to the long-term influence of a negative factor, the stock price is low or irrational for a long time, many large and small investors or unwilling to intervene, once this negative factor is removed, the irrational undervaluation of the stock price will be the first time investors to concentrate on the intervention, resulting in a sharp rise.

The bearish factor is the factor that controls the information of the stock price, including political factors, economic development trends, the impact of economic policy guidance, company performance and other factors.

A blowout is a phenomenon in which formation fluids (oil, gas and water) continue to flow into the wellbore without control, spewing out of the ground or invading other low-pressure horizons.

It is also often used to describe the occurrence of events or other uncontrolled succession that changes dramatically.

It shows a blowout development trend.

shows the booming development trend

the children of the mountains