How to connect the machine and router, please use 3Q

Oh, I don't know what kind of equipment your so-called connecting machine is, your home is using the enterprise's optical fiber network, and it must be that the computer can be connected directly to the Internet, then there are two ways to achieve your networking requirements 1Change the connection mode of the second-level router (your home router), connect the network cable from the LAN port of the first-level router (enterprise router) to the LAN interface of the second-level router, at this time, the second-level router is used as a switch, no need to set the WAN interface parameters, directly connect the network cable to the computer, just log in to set the wireless part of the parameters can be used, the wireless terminal searches for the wireless signal of the wireless router and enters the encryption key, After passing the verification, it can be connected and used; 2.Another way is to use the WAN interface of the second-level router, at this time the router is working in the routing mode, connect the computer with a network cable to log in to the second-level router, set the second-level router WAN interface to dynamic IP mode or static IP mode (the static IP address needs to be set according to the login IP address of the first-level router), and then set the parameters of the wireless part. However, it should be noted that the IP address assigned by the LAN of the second-level router must not be on the same network segment as the first-level router, otherwise there will definitely be conflicts.

I think it should be, you connect the external cable (data cable) to the ADSL socket of the router, plug the network cable into the LAN socket of the router, connect the other end of this network cable to the cat, connect the other network cable from the router to the computer, and try it like this.

It's very simple, first the cat splits the line, connects the router, and then the router splits the line to connect the desktop computer, the laptop does not need to be connected, as long as the wireless connection is OK, but the building blocks it, so that the signal will be stronger.

Don't say anything about the connector, how you

If it is a broadband cat connection wireless router that requires dial-up, set it up as follows:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router;

2. Enter the IP address of the router in the address bar of the browser (on the label behind the router), and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet account and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

You say to be specific, is it a new router to use?

Plug the network cable into the WAN port of the router, and connect the network cable of the computer to the other ports, let the management IP behind the router be seen, and enter the IP to set up the router according to the requirements.

Click on the route name, enter the password, get the IP, and you can connect.

The port marked WAN is connected to the network cable connected to the optical fiber, and there are multiple ports marked LAN, so you can use one of them to connect to the computer. Then log in to the router, set the dial-up information and wireless SSID and password, so that you can surf the Internet.

First, go to the browser, type", and then, you may be asked to enter the "Manage password (set before, forget if you don't have it)", and then you can enter the router's management page. Click on "Wireless Settings" and you can see the password of the wireless WIF. Then it's time to connect.