How to adjust the limit of Juguang motor, and how to adjust the limit of Juguang roller shutter moto

Let's see how Juguang motor adjusts the limit&f=8&rsv bp=1&rsv spt=1&wd=how to adjust the limit of juguang motor.

Summary. The motorized roller shutter limit switch should be two. One is the upper limit and the other is the lower limit. The limit switch should have a mechanical turning lever to control the stop and start of the switch.

There should be two people to operate the adjustment, one person to adjust the position of the mechanical rotation lever on the top, and the other person to operate the up and down position of the roller shutter door to cooperate with the adjustment of the position of the limit switch.

Rolling shutter door limit debugging method:

1. Toggle the nut card on the limiter at an appropriate angle to disengage the limiter, or loosen the locking screw on the limiter.

2. After opening the door to a suitable position, rotate the limit nut on the limiter to press the roller on the door opening limit switch, and after hearing the "Dida" sound, the nut card is stuck into the corresponding groove of the limit nut or tighten the screw.

3.After closing the door to a suitable position, rotate the limit nut on the limiter to press the roller on the limit switch of the closing door, and after hearing the sound of "Dida", the nut card is stuck into the corresponding groove of the limit nut or tighten the screw.

4.If the position of the door opening and closing is not suitable, it can be readjusted to achieve the best position.

Juguang roller shutter motor adjustment limit debugging method.

Hello, I am Xiaoyu, an electronic consultant, I am happy to answer for you, please later, I am working hard to sort out the answer for you, and I will reply to you within 5 minutes.

The motorized roller shutter limit switch should be two. One is the upper limit and the other is the lower limit. The limit switch should have a mechanical rotating shed finger plex lever to control the stop and start of the opening and closing of the chain.

There should be two people to operate the adjustment, one person to adjust the position of the mechanical rotation lever on the top, and the other person to operate the up and down position of the roller shutter door to cooperate with the adjustment of the position of the limit switch. Roller shutter door limit debugging method: 1. Dial the nut card on the limiter at an appropriate angle to disengage the limiting nut, or loosen the locking screw on the limiter.

2. After opening the door to a suitable position, rotate the limit nut on the limiter to press the roller on the door opening limit switch, and after hearing the "Dida" sound, the nut card is stuck into the corresponding groove of the limit nut or tighten the screw. 3.After closing the door chain Sakura to the appropriate position, turn the limit nut on the limiter to press the roller on the closing door limit switch, and after hearing the "Dida" sound, the nut card is stuck into the corresponding groove of the limit nut or tighten the screw.

4.If the position of the door opening and closing is not suitable, it can be readjusted to achieve the best position.

Do you have any other questions, I can continue to answer them.