Is there any way to get rid of the extra bangs

First, ask if you have one"Beauty point"？If so, it is recommended that you leave thick bangs that are just above the eyebrows but do not cover the eyebrows;

If not"Beauty point", and the temples (temples) near the do not fall, fuller, you can use the following one"Just like your warm eyes"The effect is very good;

If there is"Beauty point"And the temples are sunken, and I feel that this part of the face is sharply narrowed, as the saying goes"No sideburns", IMHO, you don't have to think about this situation so much, just cover it with bangs. That's the way I am. It's terrible.

But that's the shape of my face"Duck egg face shape", the bangs are left more, and the inside of the bangs is especially thinned, and the temples are directly left with two wisps, and the defects are completely covered without tying them up. (I don't know what your imagination is, the bangs are inverted layers, long on the outside and short on the inside).

If you're neither, but something similar"Plush"of fine hair, then some gel water will do the trick.

You can tie your hair up first, comb the bangs up as much as possible, leave the rest of the bangs alone, and then stick the hair on your forehead to your head with a few clips (I suggest you use some black, thin ones).

You can also wrap your hair around a few times and clip it on your head. You can have some hair on both sides so that it looks good.

Doesn't that feel natural?

Buy some scissors and I'll get them for you.

How to pit out the bangs: open **Copy a layer, select the tool, check the bangs, copy, paste the new layer, enter the channel, cut out the bangs, and close the eyes of the new layer.

Select a copy of the layer, use the clone stamp, remove the bangs, leave only the eyebrows and forehead, then select the new layer and open the eyes to change freely. Shorten the bangs, adjust the position when you are satisfied, and then merge the upper and lower layers. Merge visible layers.

The 2nd way to get rid of bangs:

First, open the [Meitu App], enter the main interface, select [Beautify**], click [Open One**], open the ** that needs the P image in the software, click the [Accessories] option in the menu bar at the top of the interface, and then click [Happy Spoof] in the old age menu on the left;

Click [Wig], choose a suitable wig, and the [column] of the hairstyle will appear in the open **, you can adjust the size, transparency, position, etc. of the hairstyle, adjust it according to your preferences, and click [Save] after completion;

Method 3:

1. Enter the PS software, upload the portrait**, and then select the excess hair from the box, and press the F5 recognition tool on the keyboard to remove the messy hair;

2. Then use the imitation stamp tool to repair the excess hair, and finally use the stamp tool to absorb the eyebrow part and outline and rebuild.

Just jam the bangs with a hairpin.

Method steps: Comb the bangs loosely, and divide the bangs with a ninety-one line, so that the effect is to increase the length of the bangs, and will not spread out to cover the eyes.

When dividing the line, don't deliberately divide the line too clearly, so that it looks like the bangs are thicker.

Move all the bangs to your temples and secure them with hair clips. In this way, the bangs are much more extended than the previous bangs, and they are not afraid to cover their eyes.

Then feel free to scatter a little bangs to cover the hair clip.

How long is it? If it's long, you can: first twist the bangs like hemp rope (twist underneath), then use a larger clip to clip it on the head. I don't know if you can read the text, but I do it every time.

Hairpins, hairpins are OK, roll up and push a princess head is good,

Hello, I have such a problem myself, hehe I recommend you a good thing: the new new day lucky coiled hair comb coiled hair fork back hair fork after treatment of fine hair directly inserted into the hair, neither out to wear, but also can be closed bangs. :)

Go to the barber shop and wash your hair, and then let the barber help you blow your bangs in Korean style.

Bring a hairpin, it's beautiful and practical.

Cut the bangs into pieces, prepare scissors and hair dryers, and trim them yourself by doing it yourself, the specific steps are as follows:

2. Then use scissors to slowly trim along the arc of the bangs, trim layer by layer, and break it.

3. Use a curling iron to straighten the trimmed bangs and bend down by a certain arc.

4. Observe whether the bangs are trimmed with the appropriate thickness and symmetry, and the bangs will be successfully cut.

Divide the bangs into three layers with clips, cut the innermost layer short, and then cut the middle layer short, and basically don't care about the outside, but after cutting, you can mess up the bangs.

1. First of all, fix all the hair behind the ears with clips and leave the bangs.

2. Secondly, divide the bangs into three parts. It is recommended to use more professional scissors, starting from the middle strand and piggybacking on the end of the hair to cut the end, and the action should be light and flexible.

3. Cut the hair on both sides, the same way.

4. Comb the bangs with a close-toothed comb and trim the untidy hair with scissors.

5. Trim slightly. Use a curling comb and hair dryer to smooth out your bangs, all facing to the right, for a more styling look.

6. Blow to the left in the same way. Blow it all out. The same is true for upper hair, pay attention to the proper rolling of the comb to drive the molding.

7. Finally, press it with a curling iron, roll it, and the bangs will be formed.

Buy a set of barber utensils and trim them in the mirror.

It's to tell you the way. You don't have that kind of skill to do it yourself. (There are only scissors yet.)

Tell the barber to cut the quilt as you ask. Cut yourself carefully

Pull your hair up and cut it vertically.

Divide the hair into two equal parts, comb one part to the tip of your nose, and trim your fingers without parallel.

Lighters can be lit at high frequencies.

The first step is to wash your hair.

If you want to keep your bangs fluffy, the first thing to do is to wash your hair frequently.

Do not make your hair greasy to prevent it from affecting Liu Huihai's style. A: The second step is trimming.

The bangs should be trimmed frequently, usually once a week or two, and the long and uneven places should be trimmed neatly.

Trimming steps: 1. Use ordinary shears to cut the ends of the excessively long hair horizontally.

2. Take the scissors vertically, put the scissors into the hair 1 cm vertically, and cut the width evenly every 1 cm.

In this way, the ends of the hair are thinned, and the bangs will show a natural curvature without upturning.

3. Use a close-tooth comb to comb from the inside to the outside to the length you want to retain, and take a thinning knife at a 45-degree angle to extend the hair obliquely to cut.

The third step is to blow the bangs.

When you finish washing and drying your hair, blow dry it forward.

Blow the hair dryer from top to bottom while drying your fingers at the roots. Pull the bangs up to 90 degrees with a round comb and blow the puffiness of the roots, and those with a lot of hair will blow the bangs in two layers, blowing the outer layer first and then the inner layer.

The fourth step is to comb.

The bangs should be combed frequently, from the top to the bottom of the hair, from the roots to the ends. This will keep the bangs neat.

The fifth step is to shape the gel.

After combing the bangs, spray a little gel to make it easy to fix the shape, and if you move strongly or go out in the wind, you can also maintain the shape of the bangs to the maximum.

Three-seven bangs have always been very popular, you can also try the middle score, very temperamental, I believe you can hold it!

I just kept my bangs up, and I use small clips, and you can use a styling gel.

Tools: comb; Scissors;

The steps to cut bangs are as follows:

1. Comb the hair in front of the forehead first, and separate the hair that needs to be left as bangs;

2. Comb your hair with a comb and untie the knotted part of your hair;

3. Align your thumb with the middle of the bangs and grab the bangs with your thumb;

4. Slowly cut off the hair according to the direction of the fingers, and cut it along the curvature of the fingers, so that the hair is in a straight line after the hair is scattered;

5. Comb the bangs with a comb after cutting;

6. Finally, confirm the effect of the bangs.

If you do it yourself, you need to have a pair of tooth scissors, and you can pick it up in a zigzag way. Use a comb to comb the bangs neatly up 45 degrees, pinch it between the index finger and the middle finger, and then cut it once or twice on the tip of the hair with a tooth clip to see the effect after putting it down.

Hold the hair with a headband and cut it vertically.

First of all, you have to have a special pair of scissors, which are the serrated ones.