MiTAC 339 PDA cannot be turned on

image checksum error please reset again Exactly means "mirror check error, please reset again", it is not to ask you to restart the machine, but to restore your machine to factory settings, I have not touched your model, but even if there is a reset button, you have to disassemble the machine, I suggest you brush the machine first, there are many forums of the WM system, you can go to the detailed study, otherwise you can only take it to the repair shop to see. In addition, it is also a good idea to consult the manufacturer.

Let's talk about reality, Shuangliu County (you are from Chengdu) Zhengdong Street, there is a Tengda computer, specializing in handheld equipment You can 44 watch the ppc PDA between our classmates is broken and repaired there.

It's not a big fee, it's a solution to a real problem, it's fixed, and it's given to me!!

I can't explain the problem, but you take it and fix it, it's the only way to solve it.

This was found elsewhere: mio339 black screen on boot black image checksum error please reset again!!reset out useless.

The result is the same, and then a hard start, but it will be like this in the future.

Plugging in an external power supply seems to be fine when the machine is turned on and off. Sarcha?

A: Someone once did not cover the battery board and hard start it, causing this situation.

Does the 339 have a base? If you have, you should be able to brush it yourself, right?

Seems like you have a lot of questions online! It's a universal phenomenon of MiTA! There should be friends who will get it!

See if the original WM disc (Microsoft's CD) is still there! You can find the ROM on the Internet first, and if you don't know how to brush it, take the ROM to the repair shop to fix it! It shouldn't be more than 100 yuan!

ntldr is missing,press ctrl+alt+del to restart.

After thinking about it, the analysis came to:

The system is NT kernel, and LDR is the abbreviation of loader, which is commonly used in operating systems, so this fault may be caused by the loss of the system boot file, and the name of the file is NTLDR

2.The computer is stuck when entering the operating system, that is, when the system is booting, so it is judged that it may not be able to enter the operating system because it cannot boot the system.

When you start your computer, you get the "ntldr is missing" error message.

Check out the products that this article applies to.

Article Number : 320397

Last modified: August 15, 2005.

Revision:

Your question is very troublesome.,I'm using Windows Mobile 2003.,It's estimated that you're quite troublesome if you repair it.,But there's still a place to repair.,You come here for reference.,It's a**,Can be repaired.。

Good luck.

Personally, I think, flash the phone

MiTAC phones are rarely repaired. My mio8390 (flashing king) is broken, and there is no place to fix it.

MiTAC 350 handheld computer can't support 4G card, no way, this is limited by the system.

Let's see if you can reflash the machine, but there is a certain risk in flashing.

I checked the information, I can't access the Internet wirelessly, unless I synchronize it with the computer, use the computer synchronization software!

MiTAC MIO528 handheld computer, Chinese Simplified Chinese, pocket PC2002 system, 32M+64M memory, read books and listen to songs **, when MP4 is used, there is no problem, there is no fault, the screen is perfect, buttons, card slots, recordings, speakers are all normal, the shell is worn, the back is worn, there are scratches, but the silver shell is aluminum, very strong, the blue part is plastic, not repaired, the specific color please see the real shot **, there is no treatment. There are only accessories: galvanic battery (the battery cell has been replaced, it is more durable, and there is 70% after trying to see **1 hour), the original data cable (with charging interface), and the stylus is replaced.

The others are gone, charging can be universal charging, you can also modify the data cable, as long as the data cable is cut, the red and yellow lines are connected to a lack of failure, and a new NEC substitute stylus is sent (a little thin and not trembling, the length is just right, you can change it yourself).

It's good to level up, you won't let me help you.

Get the point of sale to sprinkle, if there is a problem, let them get it. However, if you have seen the warranty, you may incur a fee.

No problem ! 1.It's just a virus.,Just format it.。 2.Or upgrade.