The battery car is charged with Koko Rubik s Cube, what should I do if the car is stolen?

After your electric car is stolen, you should call the police in time, let the police help you with the best loss, and give the criminals a certain punishment.

There is no direct causal relationship between the theft of the electric car and the way in which it was charged.

You can go directly to the police to deal with it and see if you can get your electric car back.

Direct alarm handling, the fastest way to deal with it.

If your car is stolen, you can call the police and find the police to help you. There should be cameras everywhere you charge.

Judging by your description, your battery car was charged with a Koko Rubik's Cube, and as a result, the car was stolen. It is recommended that you go to the police station to call the police, adjust the surveillance, and look for the thief.

If you have a license plate on your battery car, you can find your electric car by calling the police, but if you don't have a license plate, you can also call the police, but you may not be able to find it back.

If the car is lost, you can go to the police, follow the characteristics of your car, and then. Just make it clear to the staff.

In this case, you can only call the police, and the public security organs will help you recover your lost things.

Hello! Your electric car has GPS navigation to locate it, and you have to learn to find the electric car.

I don't know, I haven't driven a battery car. I don't know.

The wiring method of the battery car 6 battery is as follows:

The connection principle of the two batteries is the same as the wiring method above to control the two groups of batteries with air opening. A group of six blocks controls the switching of two groups of batteries with two empty openings.

The connection of the 6 batteries of the electric vehicle is 60V, and the connection method: series connection. Here's a diagram of the connection:

Schematic diagram of electric vehicle battery series connection.

Schematic diagram of series and parallel connection.

The positive pole of each battery is connected to the negative pole of the other, and it is best to solder it with solder after connection to prevent poor contact. The remaining positive pole is connected to the positive pole + (bat+) of the battery box, and the other negative pole is connected to the negative pole of the battery box—(0).

Classification of electric vehicles.

1. Electric vehicles can be divided into electric bicycles, electric motorcycles, electric unicycles, electric four-wheeled vehicles, electric tricycles, and electric scooters according to the number of tires and structural types; According to the power** points: pure electric vehicles, extended-range electric vehicles, hybrid electric vehicles, fuel cell vehicles.

2. According to the way of power supply, it can be divided into two categories, one is to connect the external power supply to obtain power, and the other is to use fuel cells, energy storage devices (such as energy storage batteries, supercapacitors) and so on as power.

3. Classification by drive mode: pure electric vehicles, hybrid electric vehicles (series, parallel, hybrid), fuel cell electric vehicles.

4. According to the shape, it can be divided into electric unicycles, electric bicycles, electric motorcycles, electric tricycles, and electric four-wheeled vehicles.

5. Classification by use: electric vehicles; electric tricycles; Electric bikes (comparable bicycles).

No, this bai kind of car.

Unable to start.

Because although the battery of the car is 12V, the output current of the DAO is generally above 60A or even 60A, as long as it starts to provide sufficient voltage and current, such voltage and current are transmitted to the starter to work, so that the car can start.

However, the output current of the battery car tram is 12A, which is far less than the current of the car, so the power is naturally very small, so it is impossible to start the battery car.

No, the battery capacity of the battery car is low, the instantaneous current is also low, and it may not be enough to start the car and the battery is overheated and damaged.

Yes, I tried, there is just a set of spare batteries at home, take two batteries and connect them to the car battery, and wait for 5 minutes (the battery car battery can be charged after the car battery is connected to the car battery) successfully ignited.

Are you a big truck, or a small car, is the battery car two-wheeled, if it is a two-wheeled direct can not start the car voltage mismatch, you can use four batteries in parallel, but can not be ignited for a long time.

It can't be used directly, because the car battery is 12 volts, and the battery car is 48 volts, but each battery in the battery car is 12 volts and can be used.

The car battery is 12V, the car is 6V, the line is the line, and the order should be used in two pieces, not more and not less.

With a 12V battery, the car battery can be played.

If the car battery is out of power, the battery of the car cannot be ignited with the battery.

Electric vehicle battery is also called electric vehicle battery is the power of electric vehicles**, the vast majority of electric vehicles are now equipped with lead-acid batteries, lead-acid batteries have low cost and high cost performance. Because this battery can be recharged and can be used repeatedly, it is called a "lead-acid battery".

There are many types of EV batteries; There are lead-acid batteries, lead-acid batteries for pure electric vehicles, lead-acid batteries for hybrid electric vehicles, gel batteries, nickel-metal hydride batteries, lithium-ion batteries, etc. At present, hybrid electric vehicles are basically divided into three categories: mild hybrid type (that is, the electric system is mainly used for starting and braking energy, and the 42V electric system that will be promoted on all cars belongs to this type), and the medium hybrid type (that is, the electric system is used for starting, braking energy and medium and short distance driving).

Fuel cells convert chemical energy directly into electrical energy and supply it to electric motors to drive vehicles. Its main advantages are: high efficiency, fuel saving; zero emissions; Low noise, etc., especially suitable for vehicle power source.

Hydrogen fuel cell vehicles will be the ideal replacement for petroleum-fuelled vehicles.

The structure of the electric vehicle battery consists of a conductive coating for a lithium battery and a conductive coating performance for a lithium battery. They have a positive electrode of ferrous phosphate and a positive electrode of fine particles of ternary manganese acid used in supercapacitors, lithium primary batteries (lithium sub, lithium manganese, lithium iron, button type, etc.) instead of etched aluminum foil. It can also inhibit battery polarization, reduce thermal effects, and improve rate performance; The internal resistance of the battery is reduced, and the dynamic internal resistance increase of the cycle process is significantly reduced. Improve consistency and increase the cycle life of the battery.

The maintenance methods are: determine whether the input voltage of the AC power supply is consistent with the charger, and determine whether the output voltage of the charger is consistent with the rated voltage of the battery. Plug in the plug where the charger is connected to the battery compartment first, and then plug in the AC power plug.

The charger is used indoors, and attention should be paid to moisture-proof and shock-proof. It is strictly forbidden to cover it when charging, and it should be placed in a ventilated and heat dissipation place.

Yes, I just succeeded. du my car.

Zhizi is Toyota Zhixuan,Electric dao pool 12v60ah,I use 12v20ah start-back drive。。。 Remember to answer the wire to be a little thicker, start the success of the wire immediately pull off the wire, and then drive for half an hour, now you can turn off the engine can also start again. . .

Here's how:1. First of all, prepare a tie line.

2. Open the hoods of both vehicles. (Note: The place circled in red is the battery) 3. Remove the buckle of the battery, so that the shell cover of the battery is opened.

4. After opening, you can see the positive and negative poles of the battery. + is the positive pole, - is the negative pole.

5. Finally, connect the positive pole of the two cars to the positive pole and the negative pole to the negative pole. In this way, the car's battery is electrified.

1. Take the wire: This is a necessary item for the car to take the electricity, do not take two wires to make do, because the instantaneous current of the vehicle at the start can reach 200-600A, and the diesel car even reaches 1000A, if it is calculated, 10 square copper wires can ensure the smooth and safe start, so the car battery connection line must buy the right brand, the quality is the best, do not try to be cheap. This is one of the must-have items in the car, once the battery is out of power, you can take it out and use it, and you can also help others when you don't use it.

2. Emergency power supply: This is a new type of power bank like a thing, there are two kinds of lead-acid and polymer lithium battery, which can help the vehicle with a loss of power to start, and can also have lighting, charging mobile phones and multi-functional supplies used with an inflatable pump to inflate the car. And it is generally portable, very lightweight, if you have it, you don't have to ask others for help.

Be sure to charge it in time after use and keep it full of power to deal with emergencies.

3. Positive, first connect the positive: first turn off all the electrical equipment on the car, make the key in the OFF position, open the cabin cover to find the battery, there are positive and negative poles written on the battery, generally the red "+" sign is the positive pole, and there are generally two wires, at this time, take out the red one, open the battery cover, pinch the clamp on the head to clamp firmly the positive pole of the battery of the electric car, and the clamp at the other end to clamp the positive pole of the battery of the rescue vehicle. Be sure to connect the positive electrode first, then the negative electrode, do not reverse the order, and do not use the battery clamp to touch anywhere except the battery pile head.

4. Negative connection, negative connection: After the red positive electrode is connected, take out another wire, first clamp the negative pole of the tram battery, the negative electrode is generally black "—" number, and then pinch the other end of the clip, from beginning to end the clip do not touch other places, to clamp the negative pole of the rescue vehicle battery, when the connection will pop out of the electric spark, please don't be afraid, this also shows that you are right. The reason why the negative electrode is not connected first is because the whole vehicle is basically a negative electrode (that is, commonly known as "tie iron"), if the negative electrode is connected first, when connecting the positive electrode, the clip will cause a short circuit and burn the parts on the car when it touches any conductive place in the body.

5. After starting the vehicle, first remove the negative, and then dismantle the positive: after the battery is connected, the rescue vehicle will first ignite and charge the battery, and then the no tram enters the vehicle to open the key, at this time the instrument light will be lit smoothly, and then try to ignite (not more than 5 seconds), if it fails to start smoothly, step on the accelerator of the rescue vehicle, and the speed is kept at about 2500 rpm, and then the tram is ignited again, if the starter is no problem, the car has oil in the case of general can be started smoothly, after the non-electric vehicle starts, Remove the negative clamp first, then remove the positive clamp, for the same reason as why the negative pole is followed by the fourth one.

The positive and negative poles of the battery must not be reversed, and the order of assembly and disassembly should be strictly in accordance with the order of first connecting the positive and then the negative, and the first dismantling and then the positive.

Car battery charging method:

1) The parking position of the vehicle equipped with a good battery should not only allow the jumper cable to overlap, but also not allow the two vehicles to touch. Make sure that the jumper cable is not loose, the insulation is not broken, and it is not broken or falling off.

2) Disconnect the ignition switch of both cars and all lights and electrical loads. Hazard flashers and emergency warning lights can be retained as appropriate.

3) Activate the parking brake for both vehicles. The gear selector lever for vehicles equipped with an automatic transmission is placed in the "P" position.

4) After disconnecting the battery column cover, clamp the clamp end of the first jumper cable on the positive pole of the auxiliary battery to ensure that the cable does not touch any other metal parts, and then clamp the other end of the cable on the positive pole of the power loss battery. Note that the positive and negative poles of the two batteries must never be connected.

5) Clamp one clamp end of the second jumper cable to the negative post of the auxiliary battery, so that its terminal is connected to a solid engine tie point at least 450mm away from the battery loss. Make sure that the two cables are not touching or close to the pulleys, fans, or other parts that will follow the action when the engine starts.

The correct way to use the car battery can also be learned by female drivers!

The car battery is out of power, how to take the power.

Determine the position of the battery, park the rescue vehicle in a suitable place for electricity, and connect the positive electrode with the positive electrode, and connect the negative electrode with the negative electrode.

Don't make a mistake, start the rescue vehicle first, and then start your own vehicle, after the engine runs stably, remove the battery cable, and maintain the engine running for more than half an hour, of course, if you can't find a suitable vehicle to do the rescue ride, you can find professional road assistance, the major insurance companies designated partners are also more assured.

If you need to take electricity to save yourself, you must pay attention to these things First: the two cars can not be next to each other, and the gap should be reserved to prevent short circuit. Second:

The car that provides power must be in the flame-off state when clamping the battery. Third: take the power sequence, first connect the positive pole of the power supply vehicle, then connect the positive pole of the rescue vehicle, and finally connect the negative pole of the power supply vehicle, and the other end can be connected to the cylinder block or cylinder head of the vehicle to be rescued.

Here is added why can't the negative electrode be connected to the negative, the negative electrode is connected to the ground, and the iron is also connected to the ground, but if the negative electrode is directly connected, if the battery is short-circuited or broken, the car cannot be generated. A short circuit can even trigger a battery** because an instantaneous electrical spark ignites the flammable gas emitted by the battery. So be aware of this.

The positive pole of the other car is on the positive pole of my battery, and the negative is on the negative. (That's right, the parallel voltage does not change).

When connecting the jumper cable, the connection sequence of the cable must not be mistaken, the positive pole of the battery that is out of power should be connected with the positive pole of the rescue vehicle battery, and then the negative pole of the rescue vehicle battery and the metal part in the engine compartment of the dead vehicle should be connected to achieve the purpose of grounding wire. After the jumper cable is connected, it is best to start the engine of the rescue vehicle to maintain the stability of the voltage, and when the charging is complete, the jumper cable should be removed in the reverse order of connection.

To start the vehicle by taking electricity, there must be a jumper cable and a battery in a normal state, which can be connected to the battery of other vehicles through the jumper cable, or a battery with sufficient power, and continue to charge for about five minutes to achieve the purpose of emergency charging.