Nokia E50 Problem Master Advance!

Hello! I also just bought a parallel E50 on the ** Internet, and I've got it all.

Question 1: Internet access settings - Function Menu - > Tools - > settings - > connection settings - > access points - > select Add Access Point - > Use default settings - > and then change:

cmnet: data bearer mode grouping data, access point name cmnet, username none, prompt password no, password none, authentication normal, home page none, advanced settings: mobile phone IP address automatic, **server none, **port 0

It can also be added according to the photo.

Mobile MMS: Data bearer mode packet data, access point name CMWAP, username none, prompt password No, password none, authentication normal, home Advanced settings: mobile phone IP address automatic, DNS automatic, **server,**port 80

Monternet: Data bearer mode grouping data, access point name cmwap, username none, prompt password no, password none, authentication common, homepage, advanced settings: mobile phone IP address automatic, **server,**port 80

For example, tap Mobile MMS - > Tap Bottom Left Option - >

Problem 2: The infrared light is in the slender place under the volume button on the left side of the phone.

Question 3: The quality of parallel cargo aircraft is also good. I bought it from Finland.

Press * on your phone to see if the serial number is the same as in the case. Then I went online ** kit (requires the kit's CA-53 data line driver) and NSS. Use NSS to change to the code of the National Bank, and use the official website of NokiaSoftwareUpdateRsetup to brush the latest version.

The data cable CA-53 was bought on **, the original production in Thailand.

All of the software is available online.

E50 Internet Settings.

Menu - > Tools - > Settings - > Connection Settings - > Access Points.

There are three access points.

mms gprs: data bearer mode grouping data, access point name cmwap, username none, prompt password no, password none, authentication common, home advanced settings: mobile phone IP address automatic, DNS automatic, **server,**port 80

Data bearer mode group data, access point name cmnet, username none, prompt password no, password none, authentication normal, home page none, advanced settings: mobile phone IP address automatic, **server none, **port 0

Over GPRS: Data bearer mode packet data, access point name cmwap, username none, prompt for password no, password none, authentication normal, homepage, advanced settings: mobile phone IP address automatic, **server,**port 80

I really can't help you with other questions, go to the mobile phone forum bubble more. Here are a few good forums for you.

And 99 percent of the E50 you're buying now is refurbished, and you're going to identify a machine that's been out of production for a long time.

It is recommended that the grid machine is all set up automatically.

The steps are as follows: Shut down.

When turning on, press and hold the call button + 3 number button + * number button + and then press power on.

Don't let go and start formatting. Press one piece, don't let go of one!!

In short, the most thorough formatting steps are: uninstall all the programs that can be uninstalled in the program management - take out the extension card - check whether there are any system errors - format the phone - install the expansion card - format the expansion card (the phone at this time is the purest basic system) - install the programs that need to be installed - restore the address book - complete.

This forum is not bad. It is recommended to go in and study.

The best thing to do is to go to the forum and have a look.

Nokia series of smartphone lattice machine method.

1. Soft grid. Enter * on your phone and then ask you to enter the lock code, the initial password is: 12345, if you have changed the phone password, that is the changed password (not the SIM card password), and then a white screen appears, only the word nokia is displayed, 3 5 minutes later, it will be completed, and the time to re-enter the phone after the grid is finished;

2. Hard grid. For the S603 version: turn off the computer first, press and hold the "green dial key" and "* key" 3" key + "power on button" while turning on the machine, until a line of progress bar appears at the top of the machine screen to let go, and then reset the time.

For the S605 version: turn off the computer first, press and hold the "green dial key", "red hang-up button", "camera button" key + "power on button" while turning on the machine, until a line of progress bar appears at the top of the machine screen, you can let go, and then reset the time. N97 and 97mini lattice machine methods:

Turn on the keyboard and press and hold the "SHIF key in the lower left corner", "Delete key" in the upper right corner, and "Space key in the lower right corner" at the same time before turning it on.

3. Through the software grid.

Install the system tools software, there is a formatting option in it, you can enter the lock code to grid the machine.

There are several points to pay attention to in the above grid: keep the power absolutely sufficient, do not try to shut down the grid on the way, do not plug in the charger, etc., if it is violated, it may cause serious consequences such as burn-in. There is also a hard grid may be a little damaged to the hardware of the machine, not to use the hard grid, do not use the hard grid when the machine cannot be turned on.

Press the four buttons together to try your phone.

Use the second method above, turn off the computer first, press and hold the "green dial key" "* key" 3" key + "power on button" at the same time as the boot, until a line of progress bar appears at the top of the machine screen, you can let go, and then format the memory card as well.

Nokia mobile phone format is divided into soft and hard grid, soft grid is to delete all the rewrites of the C disk to restore the initial state.

Hard format is to format the C drive and then re-import the data from the Z drive.

Therefore, the hard-grid plus card is the most thorough.