Dopod three color screen, what is Dopod three color screen

The camera keys are locked, and I've had this kind of problem before. You loosen the camera and then turn it on again!

The problem is a bit complicated, and I haven't seen anything like it before.

According to what you said,It can be turned on and off normally.,But restart it and enter the three-color screen.。。 I don't know if your phone has been swiped. So I don't know if it's a problem with the rom version.

This is a bit tricky for you, so it's best to check it out at the service station.

Poisoning is impossible, and there is no virus on the phone for the time being.

I'll tell you from my experience of playing PPC for 5 years: re-flashing the ROM can basically solve the problem.

It is best to reflash a ROM with a stable point

1.The three-color screen is the three pieces of the screen divided into three colors, and if you want to flash the machine, you must brush it under the three-color screen.

2.Clearing the memory is also a hard boot, which does no harm to the machine, but everything in the ROM of the machine will be lost, and the system will return to the factory state.

The three-color screen is used to flash the start screen,The software is installed more,You can harden it,I advise you to go here and take a look。

There are many more details in this

It's good every time you go in in a hard way.,Store the data in the card.,You still go to the forum to post.,There's no master.。

Flash the machine can only flash the machine, first find an e-document board original rom to save it.

You have to unlock it before you can flash it.,Otherwise, it'll become a brick.,,Go to the forum to have a look.。

You just have to press it in the middle of it, otherwise it won't work, just try a few more times I did it for a long time

If you don't succeed, pull out the battery, which has no effect on the phone

Hard grid is recommended. Turn off the power first, then press and hold the left and right soft keys at the same time, and then free up one finger to press the power button for a short time, and press "0" after the black screen appears!

Changing the motherboard is generally not that expensive, about six or seven hundred. The three-color screen is generally caused by flashing, and it can only be replaced with a brick. So I haven't brushed it all along. Mine is a parallel trade touch viva that has always been used well. You haven't heard of this situation.

I have a solution! The three-color screen directly after booting indicates that the current phone is in a state of no operating system. It's better to be a dead horse and a live horse doctor, and directly brush up on the most stable operating system at present.

Don't change the motherboard yet, flash the machine and try it, maybe there's something wrong with the rom, and the virus is not off.

1200 might as well just change the machine......

The landlord looks to see if there is a good reputation maintenance company on the Internet, it is really not a dead horse to be a live horse, say hello ** send it to the other party to repair.

Just go find a data cable and flash it yourself.

It's best not to use ruu to brush the three-color screen,mitty is fine,But if you haven't brushed it before,You can use ruu to reduce SPL first

I've also had the same thing as you.,I'm 565 last time I could only enter the three-color screen.,But I used RUU to brush the spl into something else.,The changed system was OK later.。

May I ask the landlord, what is your current SPL?