What oil is used for Philips shavers

It should also be noted that: 1. Philips's cutter head does not need to be removed and cleaned often, it has a beard slag storage room, which is generally removed for about 1 month to pour out the beard slag, and then use water to backflush the cutter head frame.

2. When disassembling and washing the knife head by yourself, you must not disassemble the knife head from the knife holder, and you can directly punch the knife holder.

3. If you want to remove the cutter head, you must pay attention to each rotating cutter head and the mesh cover that they are equipped with, because the Philips cutter head is all imported and uses computer grinding. Philips is expensive because the quality of the cutter head is not generally good, and it is expensive to buy it if it is bad.

The cutter head and the grille should be disassembled and cleaned less, just do it once every six months, and don't use too much force to clean the cutter head to avoid deformation.

Philips razors are pretty good. **The lowest has about 100 and the highest is thousands. Hundreds of dollars are two-ended, and the two ends below 200 are battery-filled, more than 200 yuan are rechargeable, and thousands of yuan are three-headed are also rechargeable, all of which can be disassembled and washed.

If you are a boy, then it is recommended that you use this brand of razor, because it is relatively good and fashionable in terms of quality and appearance. If you are a young boy, then I recommend you to use a double-ended razor with more than 200 points, which is very cost-effective, practical, and also good-looking. If you're an older man, you can also opt for a three-headed one.

In short, it's a very good brand, and it's doing well in all aspects, basically the men around me use this brand. If you are a girl, I recommend you buy it for your boyfriend.

The razor is an indispensable tool for men to clean every day, and neat makeup is the beginning of our day's work, but we don't know that the shaver is a very serious thing that hides dirt and dirt, whether it is an electric or manual shaver, it must be cleaned in a timely manner, under normal circumstances, at least once every other week. How to clean a razor? How do you clean your razor?

Traditional Cleaning Methods:

Step 1: Turn the head of the electric shaver on.

Step 2: Use a small brush to carefully clean the beard residue from the head.

Step 3: Then close the cutter head and apply a layer of toothpaste to the cutter head (toothpaste has the effect of sterilization and decontamination).

Step 4: Apply the toothpaste evenly by hand.

Step 5: Then remove the toothpaste head and put it in a basin of clean water.

Step 6: Carefully wash the removed head with a small brush in water.

Step 7: Wipe the head dry and load it on the electric shaver after cleaning.

Step 8: The electric shaver head is cleaned successfully. The manual blade type is the same as the above step.

Seeing this, are you already dizzy and don't want to clean the shaver anymore! As a blessing for lazy people, ultrasonic cleaners are the correct shaver opening posture.

Ultrasonic cleaner cleaning method:

Put the shaving head (note that it is not the body) into the ultrasonic cleaner, add water and an appropriate amount of cleaning agent, turn on the cleaning mode, under the action of ultrasonic, the swag inside the shaving head will be cleaned out, deep holes, fine seams, dead corners and other places are all cleaned in place, and after the cleaning is over, take out and rinse clean, efficient and clean, look new, and protect your health.

Start by powering off the shaver, unplugging it from the wall outlet, and unplugging the product from the shaver. Press the release button to open the shaving head unit. Under the hot water tap, rinse the shaving head parts and stubble storage compartment for a while, making sure that both the inside and outside of the shaving head parts are cleaned.

Then close the shaving head part and shake off any excess water. Do not wipe the shaving head parts with a towel or paper towel, as this may damage the shaving head. Open the shaving head part again so that it remains open and allow the product to dry completely.

In addition to the rinse style, you can also use the included brush to clean the stubble storage compartment.

If you only rinse with water, it is not clean, especially the filter screen is not easy to clean, you can try the ultrasonic cleaner, which can clean the residue and grease in an all-round way, and you can clearly see that the grease is dispersed into a white mist, and the ultrasonic has the effect of sterilization, which is also very helpful for the cleaning of personal belongings.

For men, razors are a must-have, but razors are also often to be cleaned, so how to clean the razor properly? Let's take Philips as an example.

First we take out our Philips shaver and gently press down with our thumb on the head position, and the head will detach.

Then we found that it was dirty and unbearable to look at, it was full of broken stubble, which had been accumulated over time. So clean it up regularly.

We can use the matching brush to clearly indicate the stubble, and then wipe the inside with a wet wipe to let the stubble wipe off.

The body parts have been cleaned, and then the head, and the yellow part of the head can be rotated out and the inside can be cleaned.

Use the same method to brush off the yellow lid, brush off the slag part, and then wipe it clean with a wet wipe.

Finally, there is the cutter head, we can pour out two cutter heads, both of which are protected by a metal round cover, so they need to be cleaned together.

Finally, after all the parts are wiped clean, it is ready to be assembled according to the order in which they were disassembled.

1. Battery maintenance: If it is a rechargeable razor, it is best to let the battery inside run out and then charge it. That is, once used up and charged once.

For the first charge, charge for an additional 3 to 4 hours on top of the full charge time. If you are using a battery-powered razor, pay attention to the replacement of the battery. It is best to remove the battery after each use to prevent the battery from leaking.

It is best to use alkaline batteries in peacetime.

2. Knife maintenance. Mainly the head of the knife, after each use, clean the beard inside. After one to two months of use, open the cutter head, share the blade net, and then use the brush to clean the head and all the places that touch the beard until there is no beard.

This prolongs the service life of the cutter head and ensures the use effect.

3. It is best not to let the cutter head be subjected to any external extrusion and force, so as not to deform the cutter head. When not in use, cover the protective cover of the knife head. Do not hit the shaver to avoid loose or short circuits of the wires on the body. Complete.