The Philips shaver HQ904 is broken

To tell you the truth, the HQ904 can only be washed with the front cutter head. Philips this ** is completely made to compete with Panasonic 4853 for the market, and the shape of this model is also modeled after Panasonic's SA40, and in terms of current use, many people have reported that Philips's new razors are not very clean. If you don't believe it, you can go to the market if you think I'm a gunner, so the so-called ** cost performance of this model is definitely low in Philips' razor.

As for the problem of lz, you don't want to hear it, who asked you to buy Philips, it's difficult to use and expensive.

Today's second day of the Lunar New Year, my same model HQ904 has struck again, and it has only been 3 years since the last repair, that time because the carbon brush of the motor has been used for too long, and the button will not rotate if you turn it slightly, this time it is estimated that it is still this problem. Looks like I'm going to have to go out again for my old buddy. Anyway, I've washed it too, but this thing is just a stubble under the faucet, and you can't rinse it vigorously when there is water pressure.

In addition, the grease on it was still there when I disassembled it, and I accidentally got it on the screws, and it took a lot of work to disassemble. I just joined the work back then.,Choosing this is just for convenience.,The price is also cost-effective.,I don't know the relationship between it and Panasonic.,But the quality of Philips is not up to par should touch the conscience and speak.。

The washing is generally the head of the knife, is it necessary to wash the knife body?

and it is not sealed. It's no wonder that the circuit part doesn't short circuit when it encounters water.

Summary. 1. Open the head part of the shaver, use a screwdriver of the appropriate size to unscrew the two screws located in the stubble compartment, and the head part can be removed. 2. Unscrew off a screw on the lower part of the back cover of the fuselage, the back cover can be inserted into the gap with an old bank card, etc., and break it from the fuselage little by little, being careful not to break it with a fingernail to avoid injury.

3. The front cover of the fuselage needs to be broken open from the fuselage by hand, as shown in the figure, and then it can be separated from the fuselage. 4. Put the front cover and back cover under tap water, brush it with an old toothbrush, these two parts have no circuits and mechanical components, so you can brush with confidence.

Ask for help Philips shaver HQ 130 is broken, how to disassemble it.

1. Open the head part of the shaver, use a screwdriver of the appropriate size to unscrew the two screws located in the stubble compartment, and the head part can be removed. 2. Then unscrew off a screw in the lower part of the back cover of the fuselage, the back cover can be inserted into the gap with an old bank card, etc., and break it from the fuselage little by little, be careful not to break it with your fingernails, so as not to hurt the cave. 3. The front cover of the fuselage needs to be broken off from the fuselage by hand, as shown in the figure, and then it can be separated from the fuselage.

4. Put the front cover and back cover under tap water, brush it with an old toothbrush, these two parts have no circuits and mechanical components, so you can put Lu Blind and scrub with confidence.

Friends, I really don't understand, you can be more specific.

So that it can be disassembled.

1. Please take out the tool holder and check whether the 2 gear shafts inside are stuck, and you must let it rotate normally.

2. Make sure the battery is a bit and check it with a multimeter.

3. If none of the above problems exist, then you are buying a defective product, which is the main reason

A: Motor dead center.

B: The circuit board can not be charged or the connecting wire of the motor is desoldered.

C: The switch connecting piece is broken or the contact piece falls off.

D: The mesh cover of the blade is deformed, so that the moving knife is stuck and cannot be rotated.

The red broken skin is caused by hard scraping back and forth - scratched.

The heating is caused by the self-grinding of the cutter head.

There is a difference between the blade head and the knife net, all that can be seen on the outside of a razor is the knife mesh, and the blade inside can only be seen when the blade is opened open. Philips shaver accessories are sold together with the cutter head knife net, HQ912 should be HQ55 knife mesh blade, it is very simple to remove, there is a plastic clip on the inside of the cutter head, and the cutter head and the knife net can be separated and taken out with a twist.

It is normal for motors to be slow, and this is true for rotating motors.

Requires hand lifting**.

It is recommended that you change the razor, although the noise and vibration are greater than the rotary type, but the reciprocating type is easier to shave than the rotary type! For example, Panasonic or Gillette Braun. The minimum speed can reach 7,800 rpm, and some can reach 13,000 beats per minute.

I really don't understand why Philips is so sought after, the power of advertising.

The skin is broken because you scrape it too hard (it won't be clean if you don't use force, it's round. common disease of the head). The heating is caused by friction, which is what you said about automatic grinding, and the round head is the same.

As for the slowing down of the motor, this is normal (the Philips low-priced products are slowing down), and you can feel it even more after a year of use. As for the rotary type: the cutter head knife net is good or bad, you can't understand it at all, play the retest:

It can be seen from the texture of the knife net.

If you often scrape, I suggest you can try the reciprocating one, like the galloping Panasonic Braun, these are good, these are some common problems, that is, you will feel a lot of vibration in your hand, because of the speed of the motor,

[Wizard] delete [Wizard] except [Wizard] slander [Wizard] slander [Wizard] [Wizard] [Wizard] Electricity [Wizard] Q [Wizard].

Wizard] words [Wizard] Q [Wizard].

Wizard]: [Wizard]: [Wizard].

Wizard] [Wizard] II [Wizard].

Wizard] [Wizard] [Wizard].

Wizard] [Wizard] Three [Wizard].

Wizard] [Wizard] One [Wizard].

Wizard] [Wizard] [Wizard].

Wizard] [Wizard] One [Wizard].

Wizard] [Wizard] Nine [Wizard].

Wizard] [Wizard] [Wizard].

Wizards] [Wizards] Zero [Wizards].

Wizard] [Wizard].

Wizards] [Wizards] 0 3

Yours is sensitive. It is recommended that before you use it, pat the shaved area with cold water to shrink, and the final shaving time is not too long.

How long have you been using it? Do you usually just rinse it under water?

In fact, washing is a very convenient way to clean, however, the effect is not very good The reason is that the human face will continue to secrete oil and oil If the internal cutter head is not cleaned for a long time, it will cause the cutter head to rotate, which will affect the use of the situation you said, it is likely to be caused by this reason You may wish to disassemble the cutter head and take a look

If this is not the reason, it may be that the internal prompt function of the razor knife is too sensitive This is not to worry, don't worry about it, destroy the shout and generally use it to wash it once a week, and then disassemble and clean it once in about 1 month

Hope it helps

Addendum: The reason is very simple, if you do a very sensitive reminder function, you will not be responsible for the problem of the beard knife because there is no prompt Relatively, it can also tell you that the purpose of this is to make your beard knife last longer, and at the same time better to get the residual Zheng maintenance Hehe, if you were the boss, what would you do? Foreigners are actually very fine

Hello, the Philips razor is indeed good, my dad's beard you are also very hard, I helped him buy this a few months ago, but ** in more than 400, it is recommended that you buy this better.

In fact, this situation is normal.

Philips shavers use mostly nickel-cadmium batteries, which have the advantage of long service life and low memory. However, due to the fact that the hq6090 shaver has a 1-hour fast charging function, it does make people question in terms of charging and use.

Generally speaking, models like the HQ6090, which can be used for both AC and DC, are unlikely to charge when the new phone leaves the factory. However, there are also cases of random inspections, which is a different matter. In the final analysis, whether a razor knife is new or not depends on whether the knife head has been used.

And the situation that you said will appear full after 5 minutes of charging does exist. However, it is not because of the problem of the product, but because of the relationship between nickel-cadmium batteries; A new battery that has not been used, just like a mobile phone battery, often needs to be recharged for a longer period of time, so that the battery can be used at the highest level in the future. HQ6090 has a 1-hour fast charging function, and it is recommended that the expansion time is about 4 hours.

In this case, you don't have to worry about the prompt of the light, and after 4 hours, this problem will not appear in the future.

And even if there is a real problem with the razor, don't worry too much. Generally speaking, as long as you buy it in a shopping mall and hold a valid certificate, you should be able to return it within 7 days if there is a problem.

These razors.

It's all pretty good, but personally, I prefer the HQ904 shaver.

First of all, HQ130 and HQ801 can be charged and used with dry batteries, which is very good, very convenient, but the other two HQ902 and HQ904 I prefer in appearance, more compact and lightweight, non-slip handle design, more comfortable to grip and easier to control, and can be washed, cleaning is also very convenient, the key is that these two shavers use double-layer blade technology, shaving is easier and thorough, At the same time, it has the function of automatic grinding during the shaving process, which makes the blade long-lasting and sharp, and increases the service life.

In between, HQ904 has an elastic veneer system, which can shave better according to the contours of the face, making the shaving more comfortable. So I want me to choose HQ904, I hope my answer can be helpful to the landlord.

To tell you, there is basically no difference between Philips' shavers and similar models, and the biggest difference is the color. As far as these two models are concerned, the difference is really small, the cutter heads are double-layer blades, and even the weight is the same, do you say there is a difference? (accurate to grams) it is recommended to buy 902