How do I use a computer headset? How to plug in headphones on the computer

Now the general desktop computer will have a shortcut panel for audio input and output on the front panel of the main chassis, you see if it can be used, to install the corresponding sound card driver, I have always plugged in the back speaker, and plugged in the headphones in the front.

For the question of lz added:

I didn't use the quick panel on the front of my previous machine.

I suggest you install a realtek, this is a more intelligent sound signal import and export software (even lonely and unheard, I don't know if it's a sound card driver, but it seems to be).

Find the right one for you, and hope you can use it.

In addition, I have encountered a situation where the system does not recognize the sound card, which is much worse than you. It took a week to find the patch.

After that, realtek was installed, and the quick panel on the front was ready to use. It may also be that the signal cable of your shortcut panel is not connected, or it is an antique version, and you can't use intelligent audio splitting, so you have to use the interface at the back. See if there's an audio export cable sticking out of the back of the case (the same as the headphone speaker), and that may be the signal cable on the front panel (that's the case with my antique machine, plug it into the connector and you can use ......it in front of it.)Embarrassed, in fact, it didn't work, so I lengthened a line)

I hope your problem is solved soon, and I hope it will be solved.

Buy a two-point audio cable, which is available in the computer store.

Buy a pan with an interface on the side.

Generally, the computer headset jack is marked with a green color and the aperture is millimeters.

1.If it's a desktop computer.

There is a headphone jack near the power button on the front panel of the computer, <> the front headphone jack.

At the location of the rear panel connector, there is a headphone jack.

Put the earphone plug and plug it into the green earphone jack.

2.If it's a laptop.

On the side of the laptop case, find a green earphone jack, and insert the earphone plug into the hole.

A full guide to connecting headphones to a desktop computer

Tools Raw materials.

Computer. Ordinary headphones.

Headset. Bluetooth headphones.

Connection method: 1 First, ordinary earphones.

There is only one plug in the headphone cable of ordinary headphones, and the plug that can be connected to the computer must be cylindrical.

2 We're connecting. At that time, insert the plug of the earphone into the yellow stove rolling jack in front of the computer host.

3 Second, the headset.

The headset is a combination of a microphone and a headphone, which can be used as a microphone to hear sound and can be used as a microphone, and it has two plugs, one red and one yellow.

4 When we connect, insert the red plug of the earphone into the red jack in front of the computer host, and insert the yellow plug of the earphone into the yellow jack in the front of the computer host.

Bad argument leak 5 Third, Bluetooth headset.

Bluetooth headset is also called wireless headset, he needs the computer to also have Bluetooth function when he is linked to the computer, and it is generally connected to the notebook.

END headphones have no sound:

1. The computer sound is not turned on.

With a small speaker icon in the bottom right corner of the computer, click on it to mute the computer, so that your headphones are sure to have no sound.

2. The sound of the webpage is not opened.

There is also a small horn-shaped icon at the bottom of the web browser, which can be clicked to mute the web page, and it is possible that you will turn off the web page sound.

3. Turn off the keyboard sound.

The keyboard has a small horn-shaped key on top of it, and when you press it, the computer sound turns off back.

4. Turn off the earphone sound.

There are many pairs of headphones that come with a sound adjustment knob, and if you turn the sound to a minimum, the headphones will have no sound.

Check whether the plug of the headset and the computer match, in order to facilitate the connection between the headset and the computer, the standard is usually a diameter of millimeters, after confirming the match, insert the headset into the computer connector, detailed steps:

1. Check whether the plug of the headset matches the computer, in order to facilitate the connection between the headset and the computer, the standard is usually millimeters in diameter.

2. After confirming the match, insert the earphones into the computer connector.

3. Click Start and click Settings.

4. Select the first "System" to enter.

5. Select the "Sound" column and check whether all the content on the right is open.

Here's how to plug in your computer headset:

1. Take a look at the plug of the headset first, the pink one is the microphone plug, which has a microphone pattern on it. The black one (some of which are green) is the sound output plug with a headphone pattern painted on it.

2. Look at the socket on the computer again. The headphones are generally plugged into the front of the case, and there are two jacks on the front panel of the case, which are divided into one red and one green, the pink one is the microphone jack, and the green one is the audio output jack, and many cases are also painted with patterns to distinguish them.

3. Understand the headphone plug and chassis socket, as long as you plug it in one by one, it doesn't matter if you plug it in backwards, just change it.

4. There are also sockets on the back of the case, but there are at least three, and some are six in two rows. It doesn't matter how many there are, just remember that the pink one is the microphone jack and the green one is the audio output jack, and nothing else. There are also baffles with a pattern logo on them.