EPSON Stylus COLOR 3000 does not print with ink

It's definitely not okay to have air!

Have you emptied?

Is it a full-size cartridge? Epson's printers still stand up to beatings. If one ink runs out and the entire color cartridge can no longer be used, it proves that your printer is using a one-piece cartridge.

In the case of split cartridges, only one of the cartridges can be replaced. Not conjoined ones.

In general, this situation depends on your usual attention, pay attention to the use of colors as evenly as possible. Generally, it cannot be replaced. No more ink will work (if it's a **cartridge), I'll tell you how the chip of the cartridge works.

On the front of the ink there is a circuit board (very small) that holds the information about the cartridge. In order to prevent us from using other types of ink, in addition to the manufacturer's information in the chip, the chip counts the ink (that is, how much ink is used to print out) in the actual printing, and then changes its chip information, when the calculation is completed, the chip will no longer be used for ink separation. (In fact, it has errors, and sometimes the ink hasn't run out!)

Sometimes this color doesn't appear anymore! So there are many people who want to take advantage of this feature, and reuse the cartridge through some means (fill the ink and change the chip information), and the ** (not necessarily **, anyway) ** cartridge on the market is this meaning. What do you think they can do?

Compatible ink is born thanks to this, its chip is automatic ink measurement, and it is different every time the ink is filled. And the original cartridge is to find a way to fill the ink, and the information in the chip cannot be changed.

So if you print a large number, it is recommended that you use compatible inks. If the quantity is small, it is not cost-effective, the production process of compatible ink is poor, and the ink particles are larger. There is some damage to the printer's printhead. Of course, a small number is not cost-effective.

If you're a master, you can just buy ink-compatible chips and go back and love it! (If the ink is **, there is no need to use its chip.) But one downside is that the ink may not be very good!

The color is somewhat offcast. Normal formal products also have color casts, so you have to learn to control them in the printer. Actually, there is not much difference.

This is a way to print a small amount of ink and want to use the fullload ink clean every time.

It's definitely not okay to have air!

Have you emptied?

Is it a full-size cartridge?

See mine!

Hello, the printer is color3000 bar, a large format printer,

After sending the print command, the printer can feed the paper normally and the printing action is normal, and the blank page or white horizontal stripe is printed at this time, which is caused by the nozzle is blocked, please refer to the following solutions:

1.If you are installing a newly purchased ink cartridge, you can see a yellow adhesive strip on the ink cartridge when you open the inner and outer packaging, and you must remove this seal before replacing the ink cartridge before installing it on the printer.

2.Follow the method below for nozzle inspection:

1) Turn on the printer and load A4 paper in the printer feeder;

2) (for Windows 98 Me users).

Select "Start" - > Settings - > Printer", right-click the printer icon, and select "Properties" - >Maintenance" or "Utilities";

For Windows 2000 XP Vista 7 users).

Select "Start" - "Control Panel" - "Devices and Printers" or "Printers & Fax", right-click the printer icon, and select "Printing Preferences" - "Maintenance" or "Application Tools";

3) Select "Nozzle Check", select "Print" according to the on-screen prompts, and the printer will print out the nozzle check sample;

4) If the printed nozzle inspection pattern is missing color or broken line, please select the "Print Head Cleaning" button;

5) It is recommended to leave the print head for 24 hours to fully soak the ink into the print head and then do a nozzle check to avoid wasting the ink;

I bought the cartridge in question and replaced it with one on the line.

Go to the Internet to find an R230 clearing software to try to reset the chip.

It is possible that the print head cannot be returned to its position due to foreign objects inside the printer. Please do the following:

1.If it is a new product, please make sure that the blue tape on the inside and outside of the product has been completely removed;

2.Turn off the printer, open the printer cover, and remove the paper or other obstructions from the paper tray channel.

3.Check that the cartridge hatch cover is tightly closed: Open the cartridge hatch cover, push the cartridge down until it locks into place (with a click), and close the cartridge hatch cover until it clicks.

4.Turn the printer back on and check if the indicator status is back to normal. If the fault still exists, please contact the Epson Authorized Service Center for further testing. You can browse the ** below to see the nearest service center.

Tips: Pay attention to the working environment temperature in winter, the working environment temperature of the printer is between 10-35 degrees, when the temperature is too low, the lubricant of the printer cart guide rail solidifies, which will also affect the movement of the font car, please place the printer at the normal temperature for 1 hour before use.