What is the fingering of running and squirting? Keep it simple

There are two types of sprays:

C-type continuous spray (transverse continuous spray): This continuous spray is the easiest to practice C-type continuous spray fingering:

1.shift (first drift).

2.Pull back the head of the car ) step must be fast!

3.shift ( second drift attention!) Here is not pressed ) 4.+ For the first time to breathe fire, it must be pressed first and then then ).

5.shift ( third drift ).

6.+ The second time you breathe fire, you must press first and then press )

7.Third Spitfire )

D-type continuous spray (diagonal continuous spray): Fingering of D-type continuous spraying:

1.shift (first drift).

2.Pull back the head of the car ) step must be fast!

3.shift ( second drift attention!) Here is not pressed ) 4.For the first time to breathe fire, you must press the ) at the same time

5.shift ( third drift ).

6.For the second time to breathe fire, you must press at the same time).

7.Third Spitfire )

It is recommended to learn C form

Hope it helps

Spray to the right: 1 right front shift 2 left front 3 right shift 4 left front 5 right shift, the first step and the second step of the "front" are not released).

Needless to say, spray to the left.

In general, the best route is to run the inside line (floating inside line).

You're only so experienced, and I'm more than a few dozen w.

Still hitting the wall!

I'm afraid of being embarrassed and learning from me, so when I get to the blue hand, I will go back to the primary level to practice the new number!

Believe that you will succeed!

There will be a variety of running Lianhuai spraying, of course, because in order to optimize the cornering technology! This makes it possible to stick to the wall faster and in less time! And it's an art, too!

In fact, the other even sprays are bred from double sprays!

There are two kinds of sprays!

Take the left bend as an example).

Spray: , shift, shift, shift,

Spray: , shift, shift, shift,

Double spray: , shift, shift,

The double spray is the earliest spray, and it is a good way to corner, but he is only limited to short corners, and if the longer corners are not very useful! There is not much advantage in cornering!

Therefore, there is a D-type continuous spray, D-type solves the shortcomings of double spray, and if the technology is good, no matter how long the bend, you can do unlimited continuous spraying, but the D-type also has his shortcomings, that is, it is more difficult to control, it is difficult to do the wall corner, but it is not impossible to do, but there must be a very skilled technology, but it is not easy to practice such a high technology!

In order to achieve the desired effect, there was a C type spray, and the C type made a slight change on the D type (you can see it by comparing it yourself), although only a small change was made, but the effect was completely different. With the C type, you can bend more close to the wall, and there is also a speed base, which is a more optimized way to corner!

But it's not easy to master these three techniques well!

Of course, there is not much difference between double spray and D type continuous spray, and generally double spray will understand D type.

But the difficulty is C-style! Although there is not much difference in fingering between D and C!

But it's completely different in terms of use!

Type continuous spray type continuous spray 3Double spray.

1.↑→shift

The first drift.

Pull back the car. The steps must be fast!

3.→shift

The second drift.

Note! Here you don't press .

+ For the first time to breathe fire, it must be pressed first and then then ).

5.→shift

The third drift.

+ The second time you breathe fire, you must press first and then press )

Third Spitfire )

Introduction: Lian Piao is to play the drift skills to the limit. You can use Lianpiao to pass through the large curves in the forest hairpin with a few small drifts, and you can quickly accumulate N2O, so that you can truly experience the joy of drifting!

！But there is a caveat!

Method:1It's still the same as before, press shift first to enter the normal first drift state.

2.Get on the right track! (Medium Don't let go!) ）

3.Press Shift to perform the first fire-breathing and start the second drift!

4.Get on the right track! (Don't let go either!) ）

5.Shift for a second fire-breathing and a third drift!

drift (also known as cutting drift).

Introduction: Cutting

Drift, as the name suggests, is to use the shift button to control the angle of the front of the car in the drift process to swing back to the front of the car at high speed in the drift, so that the drift ends as soon as possible, and the effect of better saving N2O is achieved

Method: In fact, it is very simple, that is, when the drift is about to end, press a short time to drift back once, and then make the last step of continuous spraying at the end! However, you need to pay attention to the time when you press shift (i.e., drift back).

If you master it well, you will achieve the desired effect, and if you press shift too early, it will cause the front of the car to not swing back! Can't cut off the drift! Pressing shift too late will cause the system to misjudge that you are drifting twice, and finally you can't breathe fire!

That's it.

Even spraying correctly is calming the fingering:

1.shift (first drift).

2.The brigade (pull back the head) step must be fast! Sun Xian.

3.shift (second drift).

4.+ For the first time to breathe fire, it must be pressed first and then then ).

5.shift ( third drift ).

6.+ The second time you breathe fire, you must press first and then press )

Repeat 3456