How do you get the spray of the bubble kart

Updated on Game 2024-04-02
17 answers
  1. Anonymous users2024-02-07

    I'll teach you one of the simplest and most effective ways to connect with you:

    Right Shift Left Right Shift Left Right Shift Left.

    If you press it continuously, you have to practice a lot, and you will find the trick inside, which is that practice makes perfect.

    There is another problem, which is to practice in **:

    I suggest that you re-establish a trumpet and practice in the beginner's guide, you can have unlimited time, it should be noted that you must not give the beginner's guide, you can practice continuous spraying in it.

    Thank you!!

  2. Anonymous users2024-02-06

    Tip: Press the jet between the first and second strokes. After that, too, that's how I practiced spraying.

  3. Anonymous users2024-02-05

    Introduction: Lian Piao is to play the drift skills to the highest level. With the use of the continuous drift, it is possible to drift through the forest hairpin at a few small angles.

    Large-angle corners, and can quickly accumulate N2O, so that you can really experience the joy of drifting! But there is a caveat!

    Method:1It's still the same as before, press shift first to enter the normal first drift state.

    2.Get on the right track! (Medium Don't let go!) )

    3.Press Shift to perform the first fire-breathing and start the second drift!

    4.Get on the right track! (Don't let go either!)

    5.Shift for a second fire-breathing and a third drift!

    The third Spitfire.

    The fourth drift ......[You're still breathing fire in the middle of the ticket].

    In this way, a continuous spray is formed! It should be noted that the interval between steps 3 and 5 and shift is about a cabinet second. It's no different from pressing together!

    Repeat 4 and 5 when you're done....Keep repeating! It's just a fake spray!

    Many friends reflect that "when you are floating, you can't spray it like a master for a short distance", but it is actually very simple, but it is a spray first. Then a short drift and a fire-breathing! ~~

    Some people said, "Yes, yes, but it won't hit the wall, and it won't hit it in a row." This is very simple, and students who will pay special attention to this.

    Let's talk about the small medium u first; Because the little U can't be sprayed continuously.

    The angle of one vote is 'about' about 26 degrees.

    Spray once and then spray continuously.

    The forward time is about a second less than that in the reverse.

    Forward is not a matter of whether you have a reverse angle or a positive angle] for example.

    'It's the opposite angle'<'

    That is, positive angles.

    Let's talk about U, the angle of one vote is about 22 degrees. Remember, the base degree reversal should refer to "Seconds" by multi-point. No short spray is required, direct spraying.

    Big U, 1 vote is about 18 degrees, and then sprays.

  4. Anonymous users2024-02-04

    There are many kinds of sprays. Double spray, C spray, D spray, Link spray six. Double Squirt:

    To put it bluntly, it is a simple continuous spray, but only two sprays are sprayed, which is the basic double spray fingering method for practicing continuous spraying: 1shift ( first drift ) 2

    (pull back the head) The step must be fast!

    3.shift ( second drift attention!) Here is not pressed ) 4.The first Spitfire).

    5.The second Spitfire)

    One. C-type continuous spray (transverse continuous spray): This continuous spray is the easiest to practice C-type continuous spray fingering: 1shift (first drift).

    2.(pull back the head) The step must be fast!

    3.shift ( second drift attention!) Here is not pressed ) 4.+ The first time you breathe fire, you must press first and then press ) 5.shift ( third drift ).

    6.+ The second Spitfire, must be pressed first and then pressed ) 7.The third Spitfire.

    Two. D-type continuous spray (diagonal continuous spray): D-type continuous spraying fingering: 1shift (first drift).

    2.(pull back the head) The step must be fast!

    3.shift ( second drift attention!) Here is not pressed ) 4.For the first time to breathe fire, you must press the ) at the same time. 5.shift ( third drift ).

    6.For the second time you breathe fire, you must press the ) at the same time. 7.The third Spitfire.

    Three. Link drift (straight spray) is also known as double spray spray: this continuous spray is of little significance in actual combat, but it is very difficult to practice. Link Drift Fingering: 1shift (first drift).

    2.(pull back the head) The step must be fast!

    3.shift ( second drift attention!) Here is not pressed ) 4.+ The first time you breathe fire, you must press first and then press ) 5.shift ( third drift ).

    6.+ The second Spitfire, must be pressed first and then pressed ) 7.The third Spitfire.

  5. Anonymous users2024-02-03

    Continuous spraying is to complete the first ethereal fire breath at the same time as the second one. And so continuously. It's useless to just look at the method. It is recommended that lz go to that big circle contact of that town road map. The feel will come.

  6. Anonymous users2024-02-02

    First come to an accelerator, the speed is high and floating, and then a drift, 1 second later to pull back the head, and then a small float, don't press the forward button, and then press the forward button 2 times in seconds, even spray is the repetition of double spray (the landlord gives a best!) ~

  7. Anonymous users2024-02-01

    Double spray is the basis to practice double spray continuous spray is the continuation of double spray, but the last double spray is not sprayed forward, changed to pull back the head of the car and then spray at the same time drift to make up the air in the pull back spray again at the same time and then drift again so that the cycle link spray is not a technology, but a phenomenon that occurs probability.

  8. Anonymous users2024-01-31

    Double Squirt Fingering: 1shift ( first drift ) 2(pull back the head) The step must be fast!

    3.shift ( second drift attention!) Here is not pressed ) 4.The first Spitfire).

    5.The second Spitfire)

  9. Anonymous users2024-01-30

    Double spray: To put it bluntly, it is a simple continuous spray.

    .→shift

    ←.shift

  10. Anonymous users2024-01-29

    If it's floating to the right (for example).

    Float normally first.

    shift.→shift

    →shift

    Remember to be coherent.

  11. Anonymous users2024-01-28

    How to spray continuously, you can try it out by connecting the double spray.

  12. Anonymous users2024-01-27

    I'm here to mix up the experience, hehe! ~

  13. Anonymous users2024-01-26

    1.Spray:

    Introduction: Many friends who have just played kart (hereinafter written as popkart) don't know what a spray is! I've never heard of what a spray is. Here I will tell you about the spray.

    To put it simply, even spraying is "floating, spraying" This is not a player using a plug-in, nor is it a bug (vulnerability) of the game. This is just a little trick that the game has set up to increase the playability of the game! And it's still often used in the game!

    When I first started playing, I thought that others were using plug-ins in Lian Spray! But I was wrong, in one game. I accidentally let go of the throttle at the end of the drift and hurriedly pressed the throttle again.

    Unexpectedly, this inadvertent little mistake made me and Lian Peng form an indissoluble bond!

    Spraying method: 1The first is to press shift to enter the normal drift state (minimum seconds!). Same at once! )

    2.The second is to let go and shift to build. Press and straighten the front of the car (note: the first part can not let go of the accelerator to build).

    3.At the end of the drift (that is, when the drift track is disconnected and the white light under the wheel table disappears), immediately release the throttle, and then press it immediately to complete a continuous spray!

  14. Anonymous users2024-01-25

    D type continuous spray (oblique continuous spray):

    Fingering of D-style continuous spraying: 1↑→shift

    The first drift.

    Pull back the car. The steps must be fast!

    3.→shift

    The second drift.

    Note! Here you don't press .

    For the first time to breathe fire, you must press the ) at the same time

    5.→shift

    The third drift.

    For the second time to breathe fire, you must press at the same time).

    The third Spitfire.

  15. Anonymous users2024-01-24

    1.↑→shift

    The first drift.

    Pull back the car. The steps must be fast!

    3.→shift

    The second drift, pay attention to the order.

    4.Spitfire.

    To pull the head of the car, it must be pressed first and then then ).

    5.→shift

    The third drift, pay attention to the order.

    6.Spitfire.

    To pull the head of the car, it must be pressed first and then then ).

    Repeat 3456

  16. Anonymous users2024-01-23

    It's better to practice more and practice more, and if you don't care about it, you will spray it when you get used to it.

  17. Anonymous users2024-01-22

    Spray 1+shift (Optimize Drift)2back direction).

    3.+shift (two-key tap, the shorter the better)4+ Immediately return to the direction and breathe fire).

    5.→+shift

    .Repeat 3 or 4 steps.

    Finally (continuous spraying is the continuation of double spraying, double spraying repeatedly).

Related questions
11 answers2024-04-02

These software, such as network people, gray pigeons, etc., can be realized.

9 answers2024-04-02

Right alt + numpad 43136. There is an ancient key on the Windows operating system, and that is the Alt key. alt is the word"The abbreviation of "alter", which means "change" in Chinese, is known as the alternate key in the computer field. >>>More

5 answers2024-04-02

Let's start with a concept: sections. The "section" here is different from the chapter in **, but it is conceptually similar. >>>More

15 answers2024-04-02

Ingredients: a large bowl of Mengniu milk (about 400ml, even more greedy, you can come in proportion), two egg whites, two spoons of white sugar 1) First pour the milk into the pot and just boil it (it will destroy the protein after burning for a long time, and it will not be able to form milk skin), and then pour it into a large bowl, at this time you can see a layer of wrinkled milk skin on the surface of the milk. 2) Take an empty bowl and put two egg whites (the method of separating egg whites and yolks must be known to everyone, so I won't say more), two spoonfuls of sugar, stir well until the sugar is dissolved (don't beat for too long, otherwise the eggs will become bubbles) 3) After the milk is slightly cool, use chopsticks to puncture the milk skin, then slowly pour the milk into a large bowl with egg whites, stir well, and then slowly pour back the large bowl with the milk skin along the edge of the bowl, you can see that the milk skin will float on its own (pour it upside down, I remember to make magic). >>>More

16 answers2024-04-02

Right-click on the desktop, select Properties, there is a Desktop tab in the properties dialog box to set the desktop background, and there is an appearance tab to set the window mode, font size, color, etc.