What should I do if I want my computer to be able to keep time? 10

Wouldn't it be nice to install a timing software, but it takes 2 machines to shut down, otherwise you install it, and your son uninstalls it for you.

Otherwise, the next problem is, how to break the computer time limit.

Computer timer.

Have you ever forgotten something to do at a certain time while working or playing a game on your computer, causing unnecessary trouble or disruption later? Put the computer on (and don't fully turn on the energy-saving mode) and prepare to use it again for a while, but you forget it, and when you remember it, the computer has been working for a long time, and it is really wrong......A computer timer can be used to help you solve these problems.

The easy-to-use operator interface provides basic timing control functions, including: start timing, stop timing, resume timing, reset zero, and adjust timing. Once a password has been set, these controls can be password protected.

At the same time, you can freely choose which control functions are password protected, for example, only "stop timer" and "reset zero" are not allowed to be changed by others, then you can choose only these two when setting the "password opening range". When an alarm time is set, it starts ringing when the timer reaches the alarm time. Rings have several parameters for flexible settings:

Install a parental control, but the effect is not good, it is better to be strict yourself.

There are two ways to record time on your PC:

First, all PCs have a timing chip that, after initialization, sends out pulses about once per second.

The second is to use a real-time clock, a clock that calculates hours, minutes, and seconds. The PC's real-time clock is battery-driven, and it is still functioning normally after the shutdown.

There is a rechargeable coin cell battery on the motherboard, which is used to time when it is turned off and charged when it is turned on.

If there is a button battery on the motherboard, it is timed by the crystal shock on the motherboard.

The main unit is equipped with a fast-charging lithium battery, and the computer can operate normally when the computer is turned off.

That's right, there is a coin-sized coin cell battery on the motherboard. After the shutdown, it maintains the power supply to the timing circuit and CMOS.

If the battery is low (normal, time and CMOS hardware data will be lost. I also just changed the battery a few days ago.

There's a little coin cell battery on the motherboard that is powered by it.

Timed with the 8253 chip, the battery on the motherboard provides power.

There's a little coin cell battery on the motherboard that powers it, and when it's turned off, it can function like a digital watch.

There's a rechargeable coin cell battery on the main board, which is always powered and running after you unplug the power cord.

In addition, the battery also supplies power to the BIOS to ensure that the CMOS settings can be saved.

If you don't have this battery, or if this battery is dead, then you can't get the clock running without unplugging the power cord, and you'll have to reset the time every time you turn it on. (The same goes for CMOS).

There is a time chip on the motherboard of the computer, which will judge the automatic timing of the disordered mode, and the general installation of the windows system will be accompanied by the year, and the time of running on the current motherboard will be seen in the lower right corner.

1. Open the "Start" menu in win10, and find the option to open "Run", or use the key combination "win+r" to open the running window, and then enter "shutdown -s -t 7200" in the window and press the enter key or OK to start the scheduled shutdown.

2. After the command input is completed, "windwos will be closed in a few minutes" will pop up in the lower right corner of the win10 desktop, so that even if the computer is scheduled to shut down and set up.

3. If the user feels that there is a problem with the set time or does not want to perform the scheduled shutdown, then as long as the user enters "shutdown -a" in the operation window and presses the enter key or OK to cancel the scheduled shutdown function.

4. After entering the scheduled shutdown command, the "Closure of Songkuan plan has been canceled" window will pop up in the lower right corner, and the computer will not perform automatic shutdown at this time.

Countdown shutdown!?

It's super easy for you!

Yes: put the shutdown

The S-T60 is saved in Notepad, and then the format of the Notepad file is changed to. Bat double-click on it and you're good to go!

60 is the time, i.e. 60

Seconds can be their own! ）

The Blizzard calendar has a countdown function, and there is a countdown to shut down by running and entering the corresponding command.

1. Turn on your computer and click "Start" in the lower left corner of the screen.

2. Go to "Run", enter "cmd" in the box, and click "OK".

3. A black box will appear on the page.

4. Enter "shutdown -s -f -t 3600" at the cursor flashing point, and press enter to start the "shutdown countdown" program.

Note: The countdown is 3600 seconds, which will automatically shut down after 1 hour.

5. "s" means shutdown, if you restart the computer, you can convert "-s" to "-r", shut down and restart, the time is also calculated in seconds.

Start->Run-> enter shutdown

s-t time where"Time"Indicates the time you want to set the countdown in seconds, if you want the countdown to restart. This can be changed to: shutdown-r-t time.

If you want a countdown, you can set it directly on your computer's sticky notes, and set a reminder on your sticky notes first.

Then set the remaining time to display entries in the system settings.

The time remaining decreases as the reminder approaches.