When my touch4 synchronizes the video, the computer freezes, the synchronization is not finished, an

There are two possibilities for this.

1. Take XP as an example, right-click on my computer to select Properties, find the Advanced tab, find the following startup and troubleshooting items, and click Settings. In the pop-up window, find three options in the middle'System Failure',The third item will automatically restart,Cancel the check of this item,The blue screen will stop if there is a problem in the future。

2. The above settings have been made, but it will still restart in a flash, which is caused by the overheating of the graphics card or CPU, open the case to check the status of the cooling fan and radiator.

In addition, the blue screen is invisible when the device is turned on** flashes by and then restarts by itself. At this time, it is impossible to set the first step in the system, so you have to press F8 when the machine starts, and disable the restart after selecting the startup failure, and the system will stop at the blue screen**, so that you can follow the blue screen** to view the problem.

Don't stick to water. If this is the case, if you touch the computer, you will have a clear feeling of marsh.

Another is the problem of you watching the movie freeze:

Did you read it on a CD-ROM drive or on the Internet?

If it is a disc to see the host loud noise is normal,(Because reading the disc with a disc is not like a video disc without sound,The disc drive reading is a high-speed transfer, especially the flower disc reading is more laborious,Sometimes the sound of reading the disc is like the engine ringing (across the tension point,But the sound will be louder) It is generally not recommended to use the computer disc drive to play the movie,Because the wear and tear of the optical drive is great!!] ）

If it is not put with an optical drive. It's most likely the sound of a fan on the CPU!!

Frequent crashes: See if there is a problem with your system program? Can I check if there is a virus?

If none of the above work. You have only been buying for 2 months and have the right to find a Lenovo dealer to help you solve it. Brands have three packs of !!

Don't try it!!

The first step is to make the system, if it can't be normal, the second step is to open the chassis to see if the CPU fan does not rotate or does not rotate fast, the CPU heat dissipation is not good, and the inverted crash. If it's not normal ... The third step is to see if the hard disk has bad sectors...

Let's see if there are bad blocks in the memory. See if the power supply is insufficient.

Try optimization, such as Optimization Master.

If the motherboard is replaced, there is still an old problem.

I think it's a graphics card failure, and there should be no problem with changing the graphics card.

My graphics card is also bad.,3D will crash after playing for a long time.,2D won't).

Take a look at the computer properties settings, there is a setting: computer - properties - advanced --- boot and failure recovery in the setting --- automatic restart that check is not selected.

I don't know if your chip has changed the number, if it's not good, I recommend you test the hard disk!

There is also a graphics card, if there is no problem with heat dissipation, it should not be it!

How is the CPU fan cooling? Is the crash caused by high temperature, software conflict, or system?

I guess there is too much garbage in the system.,I used to open QQ and get stuck.,Clean up the garbage.,Move all the things that can be moved from the C disk to other disks to try it.。 If it doesn't work, it's your best movie's problem.

Yes, it appeared, wait a minute, and then just unplug the touch!

It's not okay to pull it out too early, just wait a bit.

iTunes has problems, many users have reported that it often freezes.

It is recommended that the landlord flash the machine This should be a software problem.

Buy a new one, ** one is only more than a hundred, you can't repair it, you may be aging the chip, the processing power has decreased.

Your problem is that the device is too old to keep up with the speed of updates, and it will crash when it is difficult to interpret, so buy a better brand.

Using 360, scan the entire disk.

In general, it is a system vulnerability or something like that.

Or maybe the computer has a slight virus or something.

Hope it helps.

It's not about configuration, yours is an assembly machine, right? I guess it's the memory module that is in bad contact.

You kill all the poison and see if it's poisoned.