What is Floppy Drive, how to install the system with Floppy Drive, install the system with Floppy Pa

Floppy disk refers to a floppy drive, which has been phased out.

Floppy Disk Pass is a powerful boot disk production tool, for example, you can use Floppy Disk Pass to make bootable disc or boot U disk, and then you can use the disc or U disk to install the system for the computer, so how to install the system with Floppy Disk? Since the disc is rarely used now, it is more common to use a floppy disk to pass the U disk, and here I will take the U disk as an example to introduce to you how to use the floppy disk to install the system.

Installation Notes:

1. If the current computer does not have a system or the system cannot be started, you need to make a floppy disk on another computer.

2. Generally, the computer has a 32-bit system with less than 2G memory, and a 64-bit system with more than 4G memory.

How to install the system with a CD Steps** (Floppy Disc Installation).

Win7 original ISOU disk installation tutorial (floppy disk through the burning non-ghost system installation)

1. Preparation for installationHow to boot the boot from the USB flash drive.

3. The steps of the floppy disk type Express loading system are as follows:

1. According to the tutorial prepared for installation, make a floppy disk through the U disk, and then insert the U disk on the computer that needs to install the system, after restarting, keep pressing F12, F11, ESC and other shortcut keys to bring up the startup menu, select the option to identify the U disk, press the Enter key to enter, the computer that cannot call up the startup menu, and view the second point of the U disk startup setting tutorial;

2. Boot into this main menu from the USB flash drive, press the number 2 or click option 2 to run [Windowspe Micro System];

3. After entering the PE system, if you need to repartition, double-click [Partition Tool DiskGenius] on the desktop, and then click [Hard Disk] - [Quick Partition].

4. This window pops up, set the number and size of partitions, the system disk is generally recommended to be more than 35G, click OK to perform the partition operation;

5. After completing the partition, double-click [Auto Restore to C Drive], this prompt box will pop up, and directly click OK to execute the restoration process;

6. Enter this interface, perform the operation of system restoration to C drive, and wait for the progress bar to be executed, the process takes about 5 minutes;

7. After the decompression is completed, the computer will automatically restart, then pull out the USB flash drive, and automatically execute the system installation and configuration process after restarting;

8. During the installation of the system, there will be multiple restarts of the lease, and after restarting into the new system desktop, the floppy disk installation process will be completed.

The method of using the floppy disk to make the U disk into a system disk with Ultraiso:

1. First install the floppy drive, after completing the installation, open the floppy drive, file, open, and open the ISO image.

2. Then select USB flash drive.

3. Then click Start to write the hard disk image.

4. There are two kinds of writing methods: ZIP and HDD, generally choose HDD or HDD+, after selecting the writing mode, you must format it first, and click Write to wait for the writing to be completed after formatting.

The unique intelligent ISO file format analyzer can process disc image files, including ISO, BIN, NRG, CIF, etc., and can even support new disc image files. With Floppy Communication, you can open these images, extract the files directly from them, and convert the image files in these formats to standard ISO format. You can go straight to the ISO file.

Files and directories can be extracted directly from the disc image.

Support arbitrary adding, deleting, and renaming of ISO files.

You can make files on your hard disk into ISO files.

You can copy the disc sector by sector to make a complete image file that contains the boot information.

You can process the disc boot information, and you can directly add Delete to get the boot information in the ISO file.

Supports almost all known disc image file formats (..)iso,..bin,.

cue,.img,.ccd,.

cif,.nrg,.bwt,bwi,.

CDI, etc.), and save them as standard ISO format files.

You can directly set the hidden properties of the disc image Chinese.

Supports ISO 9660 Level1 2 3 and Joliet extensions.

Automatically optimizes the ISO file storage structure to save space.

Shell file type association is supported, and ISO files can be opened in Windows Explorer via double-click or right-click menus.

Dual-window operation, very easy to use.

With the optional plug-in, it can realize n-in-1 boot disc production, disc image file management, and even soft optical drive, which is more powerful.

1. Copying directly to the U disk cannot be started from the U disk (the U disk does not support the boot system).

2. You can use a floppy disk, but you still need to use other software to make a USB flash drive that can be booted, and it is useless to copy it directly.

Generally, no. Because booting requires reading the boot record sector, direct copying is not booted, and special tools are required, such as software such as floppy drives. Of course, if you use the UEFI method, you can copy the original system directly into it (you can't copy the ISO), and you can directly boot the UEFI boot file inside.

UEFI you don't understand even more, let's learn simple software writing and booting first.

The UEFI boot mode can directly decompress the original image to the USB disk.