What s the deal with the blue screen on my computer?

Updated on number 2024-04-10
8 answers
  1. Anonymous users2024-02-07

    1: Consider the software factor first. The best way is to re-make a stable system to see if there will still be a blue screen, if the problem is solved, then the hardware reasons do not need to be considered, it is caused by the system or other software reasons.

    2: Hardware factors. First of all, open the computer case to see if there is too much dust inside, it is best to clean it up first, use a hair dryer to clean the dust inside, turn on the computer to see if the cup fan and graphics card fan rotate normally, if it is normal, rule out the cup and graphics card temperature factors.

    The next thing is to see if your computer memory module is two, if so, then unplug it, use the eraser to gently erase the surface of the gold finger, wipe it clean and insert only one memory stick, turn on to see if there is still a blue screen, if the problem is solved, then it is caused by the incompatibility of the two memory modules. Otherwise look below. It may be a hard drive bad sector factor.

    This doesn't happen very often, unless your computer is constantly battering, or you're buying a hard drive from a profiteer. The judging factors are as follows: if your computer system is suddenly slow (excluding virus factors) and it takes a long time to open files; The computer often freezes or has a blue screen; The hard drive occasionally makes a "squeak" sound, or an abnormal "click" sound; Formatting the hard drive is frozen, or slow; Then congratulations, you'll soon have a new hard drive.

    3: The above can basically find the cause of the blue screen of your computer, if you can't find the cause of the blue screen according to the above, then your computer should undergo "surgery" and rebuild the "internal organs" ......Most computers, redo system problem solving).

  2. Anonymous users2024-02-06

    Your computer's motherboard BIOS is unstable, you can discharge the BIOS or upgrade the motherboard BIOS. It could also be a blue screen glitch caused by an improper shutdown of the computer. Or the memory module is faulty, most of the memory module is oxidized, you can use the eraser to replace the memory slot, which is the main cause of the computer blue screen.

    Hope it solves your problem.

  3. Anonymous users2024-02-05

    There's a problem with the motherboard, or there's a problem with the memory.

  4. Anonymous users2024-02-04

    The power supply is unstable or the memory is unstable.

  5. Anonymous users2024-02-03

    Stop Error Number: 0x0000000a

    Workaround: If you can't log in, restart your computer. When the list of available systems appears, press the F8 key. On the Windows Advanced Options menu screen, select"The last correct configuration"and press Enter.

    Check that all new hardware or software is installed correctly. If this is a clean installation, contact the manufacturer of your hardware or software to get any Windows updates or drivers you may need.

    Run all the system diagnostic software provided by the computer manufacturer, especially memory checks.

    Disable or remove newly installed hardware (RAM, adapters, hard drives, modems, etc.), drivers, or software.

    Make sure that both the hardware device drivers and the system BIOS are up to date.

    Disable the BIOS memory option.

  6. Anonymous users2024-02-02

    If it is said that the heat of a certain part of the computer causes a blue screen, then it is too coincidental, why do you use a lightning bolt to get a blue screen?

    There is a possibility that it is viral! There are many kinds of viruses, and there are none.

    I recommend that you defg the disk format it all and then reinstall the system!

  7. Anonymous users2024-02-01

    Memory,,Network card,,Hard disk speed is faster, the temperature is high. Temperature..

  8. Anonymous users2024-01-31

    Is it possible that the voltage is unstable?

Related questions
6 answers2024-04-10

1。Restart the computer, after the computer brand is out, press F8, Safe Mode, the last correct configuration, Enter, Enter! >>>More

7 answers2024-04-10

unknown hard error?

If this is the case, it should be a hardware error, literally. >>>More

6 answers2024-04-10

It may be that there is a problem with the graphics card, so let's change it. It's best to talk to the merchant before buying this. If it is not compatible, return it. >>>More

3 answers2024-04-10

What key did you press to get this BIOS out, right? If your computer can't turn on, look below, because it can't be turned on, you press out this has nothing to do with your computer can't turn on (it can't be turned on caused by a crash, it's not caused by a setting problem, so it's useless to enter the BIOS). >>>More

15 answers2024-04-10

One: Poisoning Sun San, the solution is to kill the virus. >>>More