-
unknown hard error?
If this is the case, it should be a hardware error, literally.
1.If the memory is multiple slots, try to insert only one memory, if there is no problem, change different memory modules to different slots, arrange and combine.
2.See if the graphics card is plugged in tightly.
3.Hard disk cables, etc., this situation is not too big. Mainly in the above two cases.
If the above situation is dealt with and still does not work, it may be a software conflict, etc. See if you can get in in safe mode, and if you can, uninstall the newly installed software, or the modified settings, and change it back.
If it doesn't work, you can only reinstall the system, or send it to the after-sales service.
If you need help, feel free to hi, find me.
-
Unknown hardware error.
Hehe... Even he didn't know.
There may be a problem with the driver, just scan it with the driver wizard.
Think about solving it this way.,If it doesn't turn on.。。。
Remove the parts of the computer host one by one, and wipe the interface with a paper towel or eraser. It's those golden fingers... Then pick it up and try it.
-
Is the blue screen frequent?
Let's talk about it.
There are many reasons for the problem of blue screens.
Sometimes when you install the system, you will have a blue screen.
-
Unknown Hardware Error!! I guess it's a driver problem, or a memory module problem, unplug the memory module, wipe it and install it!!
-
Try it out with the driver wizard update the next driver!
-
Cause of the failure system Try the following methods.
The first type of system problem is one-click reverting.
The second type of software problem is to reinstall the software under it.
The third software virus residual file cleans up the memory.
Fourth, the software is incompatible with the software.
Fifth, the cache settings are not reasonable, and the cache is reset.
Sixth, the system is short of resources, and the memory is deleted and cleaned up.
The seventh type of virus, Trojan horse detection and killing virus.
Eighth, the hardware is overheating, the CPU is too hot, and the heatsink is too dusty.
The ninth hard drive problem is to clean up the disk. Defragment the disk.
The tenth type of hardware quality hardware should be jumped.
The eleventh type of hardware overclocking is to de-energize the battery.
The twelfth type of hardware environment is re-seated.
Only mention the arch blue screen solution. No explanation is given.
1: To boot the computer, restore the BIOS to its factory state. (Battery de-energized) is more critical and must be done.
2: You copy the following command or in. Command Prompt Input:
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
regsvr32 /s
3: Restart your computer. Do a comprehensive antivirus.
The first is to close all startup items. (msconfig) in Run (tick) ctfmon
and anti-virus software.
The second is to empty the ** station. The system needs to clear IE temporary files and records. Delete your own use.
Patch files. Third, set up a firewall. Right-click on properties on my computer. Point System Restore. (tick).
Turn off System Restore on all drives. Turn off automatic updates. (Trigger on the control surface) Restart the computer.
-
Restart, keep pressing F8, select the last correct configuration or safe mode, if not, format the system disk, and reinstall the antivirus.
It is recommended that you delete all the applications in the machine, movies or other things are fine, then reinstall the system, install the graphics card and sound card, motherboard driver and anti-virus software of the machine, and then immediately enter the safe mode for full anti-virus >>>More
The main reason for this problem is that you turn off the computer at the same time. There are a lot of programs running, and some of them are still working even if you can't see them, and they have to close them early if they want to shut them down. It's best to optimize it with optimization software. >>>More
There are several possible questions:
1. Caused by network instability, pull out the crystal head and plug it back in, if the crystal head is loose, it is recommended to change the crystal head; >>>More
The easiest and most effective way to lose system files is to reinstall the operating system.
This needs to set the IP address of the network card, you ask what the IP gateway of your neighbor is and then remember to set the DNS If the computer does not have the network card after repair, you have to right-click on the online neighbor, properties, and then see if there is a local connection, if there is no local connection, it means that your new motherboard does not have a network card.