Redmi note4x keeps stuck on the boot screen, what should I do if it lasts for almost an hour, urgent

Updated on number 2024-04-29
11 answers
  1. Anonymous users2024-02-08

    Press and hold the power button and the volume down button at the same time (the 4G version of the Redmi Note is the volume up button, not the volume down button!) ), light up the screen and release the buttons.

    Then you'll see three options.

    Recovery mode means to enter REC mode.

    fastboot mode means to enter the wire brush mode.

    norma boot means reboot.

    At this time, the volume down button is the selection key, the volume up button is the OK key, and the power button is useless.

    Press the volume down button to move the cursor to recovery mode, then press the volume up button to confirm, and wait for a few moments for it to appear.

    A green android robot lying on the ground, finally press the power button to enter.

    At this time, the volume up button is the confirmation key, and the volume down button can be selected to start double clearing.

    3.Select [Wipe Data Factory Reset] yes -

    4.Select [wipe cache partition] yes -

    5. Wait for the progress bar to end, press Back, select [Reboot System Now], and the phone will start to restart automatically.

  2. Anonymous users2024-02-07

    Redmi note4x keeps stuck on the boot screen, what should I do if it lasts for almost an hour, urgent? It's useless I can only go to the repair shop to take a look, and there is a specialization in the art industry. Of course, important information should be kept at all times. It's better to have backups. Try to see if the computer can extract the data.

  3. Anonymous users2024-02-06

    1. It may be that the system is stuck. Restarting your phone will solve the problem.

    2. Whether it can enter recovery. How to enter recovery: In the shutdown state, first press and hold the "volume up button" and then press and hold the "shutdown button", and let go when the boot screen appears, you can enter recovery.

    If you can enter recovery, please switch the system under recovery and back up the data, if it can't be successful, you need to erase all the data (contacts, text messages, phone apps, etc. will disappear).

    3. There is a problem with the mobile phone system and cannot be recognized. Whether it can enter fastboot. Ways to get into fastboot:

    In the shutdown state, first press and hold the "Volume Down Button" and then press and hold the "Power Off Button", and let go when the boot screen appears, then you can enter fastboot. Please connect your mobile phone to the computer and flash a complete system package with the method of miflash.

    4. Mobile phone hardware problems. At this time, the only way to take the phone to the repair office for maintenance is to do so.

  4. Anonymous users2024-02-05

    Press the volume up button and the power button at the same time, wait for the meter logo to appear, release the volume button, and continue to press and hold the power button.

    Knowing how many buttons appear, release the power button, control with the volume up and down keys, and select the power button.

    Find the power off button and power off. Wait a while, turn it on.

    Workarounds for some other problems with Xiaomi phones:

    1.Want to get into recovery quickly?

    Click the Menu button in System Update and select Reboot to Recovery to reboot to recovery.

    2.Want to quickly detect unwanted processes?

    Press and hold the home button to enter the program management, and click the button at the bottom left"One-click cleanup"You can clean up excess processes in memory and tell you what memory is freed and what memory is currently available.

    Note: In order to ensure the normal operation of the system, the system process will not be cleared.

    3.Won't set up IP dialing?

    MIUI ROM can automatically add IP prefixes to remote calling numbers according to your carrier, and you can set it up accordingly in Settings > Smart IP Dialing Settings.

    You can also press and hold the contact entry you want to dial before dialing, and select it in the pop-up menu"Dial IP**"。

  5. Anonymous users2024-02-04

    Press and hold the power key and the volume down button at the same time.

    Content expansion: Press and hold the power button and the volume down button at the same time (the 4G version of the Redmi Note is the volume up button, not the volume down button!) ), light up the screen and release the buttons.

    Then you'll see three options.

    Recovery mode means to enter REC mode.

    fastboot mode means to enter the wire brush mode.

    norma boot means reboot.

    Click Norma Boot to restart.

    If restarting does not work, you can consider clicking fastboot mode to enter the line brush mode.

    Use the line brush to brush back to the official system, if the flashing experience is still shallow, it is recommended to go to Xiaomi after-sales to flash the machine. Specific method: apply for unlocking on the official website - unlock the phone - use the miflash line to brush the official system.

    4. Mobile phone hardware problems. At this time, the only way to take the phone to the repair office for maintenance is to do so.

  6. Anonymous users2024-02-03

    Solution:

    Press and hold the power on and off button (about ten seconds) until the phone is turned off (equivalent to pressing and holding the computer power on and off button for 4 seconds, and the computer will be forced to shut down), and then turn on the computer like a normal power-on.

    If the same problem occurs repeatedly, it is recommended to back up the data and applications before restoring the factory settings to see if there is any improvement. If there is no improvement, it is recommended to send it to the maintenance department for testing.

    Cause analysis: If you install a third-party security management software, if you have it, you can uninstall it directly, and if the mobile phone has a security center, the reinstallation will cause the mobile phone to crash and get stuck because of the conflict with the software installed by the system; In particular, 360 should not be used in any software.

    Installed on Xiaomi mobile phones, it is easy to freeze and freeze.

    Obtaining root privileges on the development version of the system is normal, but uninstalling some system programs or forcibly enabling root privileges on the stable version of the system will cause the phone to crash and freeze.

    Operating the phone while charging will cause the battery to heat up (if it is too hot, try to take off the phone case), causing the phone to crash and get stuck.

    If you use an unofficial MIUI system or swipe the wrong official MIUI version, it may cause a crash or get stuck, or it may be an improper flashing operation.

    Users may buy copycat machines or refurbished machines, which are prone to crash and jam. The operator's customized machine will also be stuck because the system has been changed.

  7. Anonymous users2024-02-02

    Cause Analysis:

    1. If you install a third-party security management software, if you have it, you can uninstall it directly, and if the mobile phone has a security center, the problem of the mobile phone crashing and stuckness will be caused by the conflict. In particular, any software of 360 should not be installed on Xiaomi phones.

    2. Obtain root permission normally on the development version of the system, but uninstalling some system programs or forcing root access on the stable version of the system will cause the phone to crash and get stuck;

    3. Operating the mobile phone while charging will cause the battery to heat up, causing the mobile phone to crash and get stuck;

    4. Using an unofficial MIUI system or swiping the wrong official MIUI version causes a crash;

    5. Users buy copycat machines or refurbished machines through unofficial channels, and it is easy to crash and get stuck. The operator's customized machine will also be stuck because the system has been changed.

  8. Anonymous users2024-02-01

    Hello, 1. Mobile phone card, which is caused by the fact that there are more programs opened on the mobile phone and less available running memory space.

    2. You can delete some unwanted phone programs and clean up your phone's cache in time.

    3. You can also restore factory settings or reflash the mobile phone system.

  9. Anonymous users2024-01-31

    Redmi Note4X card loading instructions:

    Network standard. Redmi Note4X supports 4G full Netcom, all 4G 3G 2G networks of the three major operators of China Mobile, Unicom and Telecom, and users do not need to worry about network standards.

    SIM card type.

    The Redmi Note4X is designed with a two-choice card slot and supports nano-SIM cards, micro-SIM cards, and micro-SD expansion memory cards (up to 128GB storage expansion). Among them, card slot 1 supports nano-SIM cards (mini cards), and card slot 2 supports micro-SIM cards or micro-SD expansion memory cards (that is, card slot 2 can be used as both SIM card slots and memory memory card expansion card slots, choose one of the two).

    Dual SIM Dual Standby Card Insertion Instructions.

    Redmi Note4X supports Mobile, China Unicom, and Telecom 4G 3G 2G, and supports 4G+ networks with in-band carrier aggregation. When the primary card is China Telecom Unicom 4G Mobile 4G, the secondary card supports Mobile 3G Unicom 3G 2G VoIP**.

    Note: 2 telecom cards cannot be used at the same time: one card can use the 4G network when used at the same time, and the other card will not be able to register the network.

    Redmi Note4X SIM card installation method steps:

    1.First of all, take out the SIM card pin in the box, and then vertically insert the card pick-up hole next to the SIM card slot on the left side of the Redmi Note4X body, and after ejecting the SIM card tray, you can take out the card tray.

    2.Install the prepared Nano SIM card to the SIM tray card slot 1 position, if you are a dual SIM user, you also need to prepare a micro SIM card to install it in the card slot 2 position, and the SIM card installation direction is to install it on the side of the card tray marked with words.

    3.After installing the SIM card into the card tray, push the card tray face up and push it into the mobile phone card slot to complete the SIM card installation.

    4.Finally, it is turned on and used, if nothing else, the mobile phone can successfully recognize the signal. If the source shows that there is no SIM card, please remove the card slot and check whether the SIM card with the defense card is installed correctly.

  10. Anonymous users2024-01-30

    Redmi Note4X With this Zhila with Snapdragon 625 processor trembling or Helio X20 processor, mainstream grade, depending on the demand, the card machine is possible Sen slippery.

  11. Anonymous users2024-01-29

    Redmi macro with note4x is a Xiaoxiao Dragon 625 or Helio X20 processor, similar to playing King of Glory Lap Rent is not the highest special effect, or there is a possibility of a card under the highest special effect.

Related questions
7 answers2024-04-29

2.Open the line brush, switch to the one-click brick rescue interface, and click the "OK" button after completing the "Confirm steps before flashing". >>>More

6 answers2024-04-29

Causes of flashbacks and how to deal with them.

1. Too much cache garbage. >>>More

10 answers2024-04-29

No. Redmi Note 4X has a Qualcomm 625 processor, and at the same time, it has the consistent price-performance characteristics of the Redmi series in all aspects, and the 3GB+32GB version of the model participating in the evaluation this time is the same. >>>More

4 answers2024-04-29

The stable version is for the general public, with comprehensive functions, which can meet the needs of consumers for daily use, and pays more attention to system stability. The development version is for enthusiast users, and compared to the stable version, the development version focuses on early adopters and quick changes, which means that some new features will be logged in one step earlier. >>>More

9 answers2024-04-29

If you have a problem with your phone, it is recommended that you back up your important data first, and then perform a full package of wire flashing (it is recommended that you flash to the latest development version). >>>More