How to flash Android and reinstall the system

How to flash the Android system and install the system.

1. Now there are many applications of one-click flashing, such as Bolt Treasure, Flashing Elf, Flashing Master, novices who are not very skilled in flashing mobile phones can first try to reinstall the mobile phone system with this simple flashing tool. However, one disadvantage of this method is that it lacks a flash package for many mobile phones, and many mobile phones cannot match their own mobile phone models in the app.

2. Use the flashing tool to reinstall the mobile phone system by yourself. The three essential elements of flashing are the flashing tool, the mobile phone driver, and the flashing firmware. Many phones have their own flashing tools.

It's not as good as Samsung has odin, and 360 phones have Qiku mobile phone flashing tools. There are also flashing tools that are common to mobile phone chips. For example, MTK mobile phones are generally used with MTK flashing tools.

If you don't know what processor your phone is, you can open your phone's settings - check it for yourself about your phone.

Flashing steps:1Driver installation. Unzip and select Driver Automated.

After completing the previous step, you can go directly to the next package selection. The following is the manual installation tutorial when the port cannot be read when flashing: right-click on the computer, open the device manager, and insert the data cable when the phone is turned off.

2.For example, in a 32-bit system, double-click to open the port and manually install the driver.

3.Check that the device is installed correctly.

Some computers need to turn off driver signing due to driver signing problems. (64-bit system installation of the following one) driver installation needs to wait, select always install the program, if the installation fails, check whether it is a driver signature problem, you can turn off the driver signature.

4.Open the tool, start the upgrade, and select the language as Chinese.

5.Click on the configuration file on the right, select the upgrade package (the package needs to be unzipped) and pay attention to the file name, and you can select it twice if necessary.

<>8.When a red scroll bar appears, the connection is successful.

9.When the yellow scroll bar starts to go, and when it reaches 100, the upgrade is completed, wait patiently during the upgrade process, and do not lose power halfway.

10.Unplug the data cable, replug the battery, and turn it on. The first time you turn on the phone, you need to update the system, wait patiently for 3 to 5 minutes, and do not move the phone halfway to prevent power failure.

11.When the phone is turned on and the test is fine, it will be turned off and restarted, and then it will be used normally.

3.Enter recovery (use the power off key + volume + -, depending on the model, the premise is to flash recovery), back up your phone's important data;

4.wipe data factory reset;

5.Wipe cache partition;

6.Select Install Zip from SDCARD; 

8.Wait for the flashing to complete, and then select Restart your phone when you're done.

Card swipe packet system.

Line brush to save bricks These two are replacement systems.