-
Mineral engine oil is not as good as semi-synthetic or fully synthetic engine oil, **Although it is low, but it is really poor, if you don't care about the quality of the engine oil, the purchase problem is not very big. Anyway, I don't like this oil, it's really bad. Although the GT oil I am using now is higher than the mineral oil, the price ratio is higher, it is a four-class PAO base oil, and the PAO content of many engine oils is only about 10%, and the GT oil is over 50%, and the performance will be better, anyway, it is worth buying.
-
Mineral oil, if my car is a low-quality car like Baojun, and then I often drive and solicit customers to make money, I will use Shell's mineral oil.
If it is a bridge car within 100,000 yuan, for home use, at least it is also the engine oil with HX6 semi-synthetic or HX7 fully synthetic technology, which is much better for the car.
If it is a car of more than 100,000 yuan, it needs to be cared for even more, and it is directly beyond Heineken.
Its practical fully synthetic SN grade ash shell is not necessarily much more expensive than what you would use with other semi-synthetic and mineral oils.
You calculate the money, labor costs, road expenses and time of the oil filter element, and you will know if you do the math.
The total synthesis is changed once every 10,000 kilometers, and the mineral oil will be changed after 5,000 kilometers, and you will spend more maintenance every 10,000 kilometers, which one is more affordable?
And then the mineral oil thing, unless the car runs a lot, it is maintained often. Otherwise, it is better not to have semi-synthetic and fully synthetic protection.
-
Shell engine oil is one of the three major brands in China, and the cleaning ability is the best among the three major domestic engine oil brands.
Shell, as the best cleaning ability among the three major brands of engine oil in China, can bring carbide, sludge and wear metal particles on the engine parts back to the oil tank through circulation, and flush the dirt generated on the working surface of the parts through the flow of lubricating oil.
Shell's oils are very good, especially in the Helix Ultra class, the quality of the oil is very good, and it is very durable and long-lasting. It can reduce noise, engine shake problems, can also be alleviated, and overall the high viscosity of the Helix oil can reduce parts wear.
Features of Shell motor oils
Most of Shell's engine oil series are natural gas-to-liquids, which are purer than traditional base oils and have a more balanced molecular structure, so the cleaning ability is more prominent, more suitable for removing carbon deposits, the performance is quieter at low and medium speeds, and the power response is better. However, the quietness of medium and high speeds is poor, and the long-term performance is poor, so the oil change interval is short.
Advantages and disadvantages of Shell motor oils
Pros:
The advantages of Shell motor oil are that it is clean, the oil viscosity is stable, it can remove engine deposits, it is not easy to produce sludge, and the engine runs more smoothly than in the same class, especially at low and medium speeds.
Cons:
The disadvantages of Shell oil are that it is noisy at medium and high speeds, and the oil change interval is short.
-
1.Helix Ultra
API viscosity: SL 5W-30 and SN 5W-40
Shell Helix Ultra has two APIs and viscosity values, the API has SL and a more advanced SN; The viscosity is 5w-30 and 5w-40; It is designed for high-performance EFI petrol engines equipped with a catalytic converter and crankcase forced ventilation system. Delivering maximum protection and performance while maintaining engine fuel economy, Helix Ultra is up to 5 times more efficient at removing sludge than mineral oil, making cold starts easier. Good cleaning ability and stability, so that the whole oil change cycle to play a good performance.
2.Helix Ultrar
API viscosity: SN 10W-60
Helix Ultra is Shell's racing oil, which is based on the Helix Ultra with a unique formula and is a product of joint research and development between Shell and Ferrari to meet the needs of racing and tuning car engines. The biggest difference between it and Helix Ultra is that UltraR has a higher viscosity of 10W-60, which is suitable for harsh working conditions and competition conditions, and has better wear protection.
3.Helix Ultrae
API viscosity: SN 5W-30
Helix Ultrae is a top-of-the-line lubricant that reduces engine friction and improves fuel efficiency, with excellent stability and clean dispersion properties that absorb more and more dirt throughout the life of the oil, controlling it and preventing it from depositing on the engine. For car owners who are concerned about economy and environmental protection, it may be a good choice for you.
4.Heineken HX8
API viscosity: SN 5W-40
Both the Heineken HX8 and Heineken Ultra range are fully synthetic lubricants, but HX8 is Shell's entry-level, fully synthetic lubricant and was launched in July 2013. It is between the Helix Ultra series and the Blue Shell, but in the two major e-commerce networks, the HX8's is higher than the Helix Ultra. The HX8 is made in Germany and Singapore, which may be the reason why it is higher than the Helix Ultra series.
How is it different from the Helix Ultra series? HX8 has Shell's advanced power cleaning and dispersion technology, which has 5 times the cleaning power of ordinary mineral oil; It has better oxidation stability and better shear resistance throughout the drain interval; Selected synthetic base oils can reduce oil loss, excellent vibration and noise reduction, and make the ride quieter and smoother.
-
Very good, Shell lubricants focus on cleaning performance, can be a good removal of sediments and impurities, at the same time its anti-wear characteristics are also particularly good, greatly improve the operating efficiency of the engine, prolong the service life, the lubrication effect is very good, has a long oil change cycle, and the disadvantage is that there are too many Shell fakes on the market, easy to buy fake products.
The reason why it is not recommended to use Shell engine oil for old cars is that the gap between the internal parts of the engine of old cars is too large, and a lubricating oil with a large viscosity grade is needed to form a thicker oil film to protect the engine, while Shell's fully synthetic engine oil is still a Class III lubricating oil, which is far less stable than the PAO base oil is Class IV.
There are many series of Shell motor oils.
There are a variety of different types, divided by color, a total of 5 color packaging, each color represents a different use and level, but also for different models of use.
The colors are gray shell, blue shell, yellow shell, red shell, and white shell, among which, gray shell refers to Helix Extraordinary and HX8, both of which are fully synthetic engine oils; The blue shell is a semi-synthetic motor oil, the yellow shell has HX6 and HX5, HX6 is a semi-synthetic motor oil, and HX5 is a mineral oil; Both red-shell HX3 and white-shell HX2 are mineral oils.
-
Shell motor oil is a good engine oil.
Shell engine oil is one of the world's top three lubricant brands, with a high reputation and many people using it. Shell oils come in a wide range and can be used for different vehicle types.
Shell lubricants focus on cleaning performance, which can remove deposits and impurities, and its anti-wear properties are also particularly good, which greatly improves the operating efficiency of the engine, prolongs the service life, and has a very good lubrication effect, with a long oil change interval.
Features of Shell motor oils
1. High anti-wear characteristics, can prolong the service life, and can greatly improve the efficiency of the system. In terms of anti-wear, it can cope with different environmental conditions, keep the oil lubricated smoothly in the equipment, and accurately lubricate the core components of the equipment.
2. In terms of service life, the service life is guaranteed while ensuring the matching degree of the operation.
3. In terms of system efficiency, it can significantly improve system efficiency, extend the equipment maintenance cycle, reduce unnecessary damage and downtime of equipment, and reduce maintenance costs.
-
Shell oil I think in addition to more fakes, other aspects are OK, there are too many traditional big-name fakes, these years are niche engine oil, has been using G T magic red engine oil, niche imported engine oil, only official channels, there will be no fakes. In addition, the quality of PAO base oil is still relatively reliable.
-
It should be three types of base oil, four types of base oil I use only G T magic red is PAO four types of base oil based oil, fully synthetic gray shell 5000 kilometers on attenuation, G T is PAO fully synthetic oil can basically go to 10,000 kilometers before attenuation, long-term performance can crush three types of oil, the replacement cycle is 15,000 kilometers, you can refer to the following.
-
Shell is slightly worse than Mobil, but in terms of **, it is indeed more expensive than ordinary engine oil, and the quality is better than ordinary engine oil, due to too many sales channels, fakes are also rampant, I also used Shell before, the pursuit of better power has upgraded G T magic red, the base oil of the four types of PAO runs at high speed and is strong, and the throttle is very sufficient.
-
It's really not good, it's just that the advertising is too good, the Shell oil attenuates after 5,000 kilometers, the power plummets in the second half, and the oil port is black after 8,000 kilometers of oil changes. The power boost is also a high-content PAO base oil G T magic red engine oil, 100 kilometers of speed only takes six or seven seconds, the high-speed is particularly cool, 10,000 kilometers of power is a little attenuated, the oil change cycle can be about 15,000 kilometers, I plan to use this oil all the time.
-
Heineken series is OK, they all say that the cold start performance is good, the hot car is very fast, I am in the south, usually run at high speed, and then I didn't use it, directly on the G T magic red engine oil, four types of PAO base oil silent and irritable is simply, I can't hear the sound of the engine at all, and now I haven't felt the attenuation after running 10,000 kilometers, and I feel that I don't have to change the oil in a hurry this time.
-
The cleanliness of Shell engine oil is the best in the fully synthetic engine oil, but the quietness is not good, the engine sound is quite loud, and the attenuation period comes quite early, about 5000km when it begins to attenuate, I used GT oil later, this comprehensive is very strong, the attenuation period comes very late, 10,000 kilometers before it begins to attenuate.
-
Just make sure it's a genuine brand of oil. This oil is very good, you can use it with confidence, this is no problem!
-
1.Shell Lubricants is the world's largest lubricant** manufacturer. We have 70 years of continuous innovation.
2.Many of the world's top automakers use Shell Oil as their first choice for new vehicles.
3.Not only that, but they also choose Shell products for vehicle maintenance.
4.The most outstanding feature of Shell engine oil is its strong cleaning ability, which can remove and filter the sludge and carbon deposits that are easily generated by the engine, so that the engine can keep it in good working condition for a long time.
5.The disadvantage is that the oil change interval is short.
-
When it comes to motor oil, the top three oil brands that come to mind are Shell, Mobil and Castrol.
Each of these three brands has its own unique characteristics. However, if you talk about the characteristics of each of the three of them, you can know a little bit about them, but not everyone can know them clearly. The following is an introduction to the basic knowledge of engine oil and the advantages and disadvantages of each of the three major brands of engine oil.
Types of oil.
Engine oil can be simply divided into mineral oil and synthetic oil. Synthetic motor oil is divided into two types: fully synthetic and semi-synthetic.
The biggest difference between mineral oil and synthetic oil is that synthetic oil can be used at a wider temperature, has a longer service life, and has a higher cost; The same oil film requirements can be achieved with a lower viscosity of synthetic oil, while mineral oil needs to be more dense than synthetic oil to achieve this requirement. In the same working environment, synthetic oil is more expensive because it has a much longer service life than mineral oil, but after comparing the number of oil changes, it is not much higher than mineral oil.
Advantages and disadvantages of Mobil oils.
The biggest advantage of Mobil motor oil is its longevity and athletic performance, followed by its high temperature resistance, but the engine is noisy.
Advantages and disadvantages of Castrol motor oils.
The most prominent advantage of Castrol oil is that it has better anti-wear effect than other engine oils, and the effect of reducing engine noise is also good; The disadvantage of Castrol oil is that the cleaning ability is not as good as that of Shell and Mobil products of the same grade, and the oil decays relatively quickly.
Advantages and disadvantages of Shell motor oils
Its outstanding feature is that it has strong cleaning ability, and the sludge and carbon deposits that are easy to produce in the engine can be filtered out, so that the engine can maintain a good working condition for a long time, and the disadvantage is that the oil change interval is short.
It is recommended that if you are in a place where road conditions are always good, you can choose Shell, but you will need to change the oil frequently. If it's a cold place or a lot of short distances, choose Castrol, and if you need good power and heat protection, choose Mobil.
-
The highest level of genuine products in regular channels is Shell Helix Extraordinary (Gray Shell) 550-600 yuan, Shell Helix HX7 (Blue Shell) 380-400 yuan, Shell Helix HX5 (Yellow Shell) 180-220 yuan, Shell Helix HX3 (Red Shell) 120-140 yuan, which is the ** after adding normal profits, the gray shell is a fully synthetic oil, the blue shell is a semi-synthetic oil, and the yellow shell and red shell are mineral oils.
There are nine lubrication methods for lubricating oil: (1) manual lubrication (2) drip lubrication (3) splash lubrication (4) oil ring and oil chain lubrication (5) oil rope and oil pad lubrication (6) self-lubrication (7) oil mist lubrication (8) centralized lubrication (9) pressure circulation lubrication, etc.
Lubricating oil base oils are mainly divided into two categories: mineral base oils and synthetic base oils. >>>More
C3 is a kind of C-series engine oil, C certification represents: catalyst engine oil, equipped with DPF and TWC high-performance gasoline and diesel engine C3 European version of the oil, the comprehensive base number TBN is very low, can not be well adapted to China. >>>More
1.Oil flow observation method.
Take two measuring cups, one of which holds the lubricating oil to be checked, and the other is empty on the tabletop, lift the measuring cup full of lubricating oil 30 cm-40 cm away from the table and tilt, let the lubricating oil slowly flow into the empty cup, observe its flow, the first lubricating oil flow should be slender, uniform, continuous, if the oil flow is fast and slow, sometimes there are large pieces of flow, it means that the lubricating oil has deteriorated. >>>More
Available in blue, taupe, and dark yellow.
The characteristics of lithium-based grease are as follows: >>>More