The Nokia6030 packet data connection does not exist

There are two ways to use the grid machine (remember to back up the data you want before the grid machine, etc.):

1. Soft grid: enter * on the mobile phone, after which you are required to enter the lock code, the initial password is: 12345, if you have changed the mobile phone password, that is the changed password (not the SIM card password), and then a white screen appears, only the word nokia is displayed, 2 3 minutes after the grid is completed, re-enter the time;

2. Hard grid: turn off the computer first, and then press and hold the dial key, "* key, and "3" key when turning on the computer, and turn on the power until the word "nokia" appears (you can't release any button during this process). Wait a few seconds until "formatting...... appears", then you can release the above buttons.

After a few minutes, the system format is completed, and the phone automatically restarts and enters the standby screen.

The above grid machine needs to pay attention: keep the power absolutely sufficient, do not try to shut down the grid on the way, can not plug in the charger, etc. Also, try to give priority to the soft grid.

Formatting your phone will erase all the information you add to your phone, as well as the messages you receive, communication records, etc., in a word, the same as buying a new phone!

By the way, there is no effect on the expansion card, if you want to format the expansion card, then choose the additional function - memory card - options - format memory card.

For phone backup problems, you can directly operate::system data

calendar records the calendar data, system data can be directly backed up) and system data records the card holder data (under normal circumstances, you can't copy the file to save the card holder data, but you can read and write the file after entering the airplane mode with system tools, so that you can save it to back up the card holder data), system data saves the content in the notepad, and can be backed up directly. c: system data, realone** record, which can be deleted directly.

It's a program data file, back up this, copy it back after the grid, and the icon of the function table will be restored to its original position.

If you are sure that your setup is good, check whether you have activated GPRS, go to the mobile business hall, and they will help you set up and activate it very well.

If you are sure that GPRS is enabled and the settings are correct, go to Nokia customer service.

I am also a user of 6030, and I have such a problem these days

First of all, it depends on whether you have GPRS activated, and if you do, you will have no problem

In is whether your mobile phone is in arrears before you don't go to the Internet, if there is, you turn off the phone and then turn it on, you can go online, anyway, my machine is like this, you can go to the Internet

Check your cellular connection settings.

It's not that the phone is a network problem, and the 7370 I use is often like this, so don't think about it, it's like that when there are too many users.

What you are talking about is the setting of Internet parameters, don't be so troublesome, you find a mobile phone that can access the Internet with the same as you, change the parameters in the network settings to the same, the following Unicom settings are for your reference.

1.Go to the Menu Tools Settings Connection Settings.

2.Go to the access point, press "Options" "Add Access Point" "Use Default Settings".

3.Custom connection name, which can be: China Unicom MMS, data bearer mode: GPRS Access point name: UNIWAP

4.The username, prompted for password, and password is empty.

5.Authenticate as normal, and set the home page to:

You probably have changed the Internet traffic** (although you have the data, but you may have canceled the previous **, so that you can't access the Internet), call 10010, and he will help you open it.

Just go here and find the software.

Have you activated GPRS with your SIM card?

If it is enabled, check the configuration of your corresponding connection, such as the access point.

The new ones should be built-in, and they don't need to be manually changed under the general stool.

Network settings. CMWAP settings.

> Settings > Settings > Personal Configuration Settings > Actions > Add > Network Account: or other names.

Username: (empty).

Password: (empty).

Use Preferred Access Point: Cancel.

Access Point Settings:

**:Initiate.

Transmission mode: group data.

Transfer Mode Settings:

Packet Data Access Point: CMWAP

Network type: IPv4

Authentication Type: Common

Username: (empty).

Password: (empty).

cmnet settings.

Settings Configuration Settings Personal Configuration Settings Actions Add Network.

Account Number: or other name.

Username: (empty).

Password: (empty).

Use Preferred Access Point: Cancel.

Access Point Settings:

**:Shut down.

Transmission and transmission mode: know the key to split the grouped data.

Transfer Mode Settings:

Packet data access point: CMNET

Network type: IPv4

Authentication Type: Common

Username: (empty).

Password: (empty).

Maybe you're down Check your phone bill.