The vacuum cleaner cannot be used, and when it is turned on, it indicates that there is dust in the

The invention of vacuum cleaners has a century of history, and the emergence of vacuum cleaners has replaced traditional manual work, bringing great convenience to people's lives. But people will always encounter some problems in the process of using vacuum cleaners, but because they don't know much about these problems, they will feel at a loss for it. Let me introduce you to some common faults of vacuum cleaners.

There are many reasons why the machine cannot work normally after being connected to the power.

1. It may be a fuse.

Blow out, replace the fuse.

2 If the wire is in poor contact or the internal wire is loose, check the wire and repair it accordingly.

3. If the power switch is damaged, it can be repaired or replaced.

4. The motor is damaged, and only a new motor can be replaced. (This is a serious problem).

There are reasons why the machine can rotate but cannot vacuum properly.

1. The dust storage space inside the fuselage is full, just clear the internal space.

2. The hose, nozzle and dust bag interface may be blocked by foreign objects. Pipes and micropores should be checked to see if they are blocked, and then foreign objects should be removed to make them unobstructed.

3. The middle connection part of the vacuum cleaner shell is improperly connected or sealed.

Ring aging, etc. Check the connections, check the sealing ring, and replace it if necessary.

Leakage of electricity from the vacuum cleaner for the following reasons.

1. If the motor fails to insulate, the motor must be dried first, and if it is still invalid after drying, the motor must be replaced.

2. If the live part of the vacuum cleaner is in contact with the metal part, it can be wrapped with insulating material and the problem can be solved by insulation.

There are several reasons why the vacuum cleaner does not vacuum:

1. The vacuum cleaner hose, suction nozzle and dust bag are blocked. Foreign bodies can be removed. (And should be cleaned up in future use).

2. If the speed of the motor is low, the motor should be checked to see if it is normal, and if there is a fault, it should be repaired in time.

The vacuum cleaner is too noisy when it is working for the following reasons;

1. The brushes of the vacuum cleaner are seriously worn and should be replaced in time to restore the machine to work.

2. All parts of the fuselage shell are loose, and the fault can be solved after reinforcement.

3. The motor fan is loose, and the fan should be readjusted to make it return to normal.

Within the three yellow ovals in the picture below, try wiping them with a damp towel.

Have you solved this problem?

My family has been prompting like this recently, no matter how you wipe it, it doesn't work.

Is your Dibao good now? My family is always prompted to see the dust, no matter how you clean it up.

Summary. Hello, happy to answer your <>

The dust of the vacuum cleaner should be cleaned frequently, and it will be difficult to clean it or cause damage to the vacuum cleaner if it is not cleaned from time to time, as follows: Yes, the dust container or filter of the vacuum cleaner needs to be cleaned regularly. If not cleaned frequently, dust can accumulate and be difficult to clean up, and may even cause damage to the vacuum.

Cleaning the vacuum cleaner regularly can effectively maintain its performance and extend its lifespan. The exact frequency of cleaning depends on how often you use your vacuum cleaner and the environment, but it is generally recommended to clean the dust container or filter at the end of each use and replace or clean the filter as needed. Also, be careful not to put wet dust or impurities in the vacuum cleaner to avoid bacterial growth or damage to the device.

The dust of the vacuum cleaner should be cleaned frequently, and it will be difficult to clean it up or cause bad feelings to the vacuum cleaner if it is not cleaned from time to time.

Hello, happy to answer your <>

The dust of the vacuum cleaner should be cleaned frequently, and it will be difficult to clean it or cause damage to the vacuum cleaner if it is not cleaned from time to time, as follows: Yes, the dust container or filter of the vacuum cleaner needs to be cleaned regularly. If not cleaned often, dust can accumulate and be difficult to clean, and may even cause damage to the vacuum cleaner.

Cleaning the vacuum cleaner regularly can effectively maintain its performance and extend its lifespan. The exact frequency of cleaning depends on how often and in the environment you use your wax vacuum, but it is generally recommended to clean the dust container or filter at the end of each use and to replace or clean the filter as needed. Also, be careful not to put wet dust or impurities in the vacuum cleaner to avoid bacterial growth or damage to the device.

The precautions for the use of the extended vacuum cleaner for you are as follows: Precautions for using the vacuum cleaner - cleaning along the direction of the carpet When using the vacuum cleaner to clean the carpet, it is necessary to move in the direction of the carpet in the hall, so that the dust can be sucked to keep the carpet wool flat. Precautions for using vacuum cleaners - intermittent use When using, the hose, suction nozzle and the connecting rod interface of the early potato should be fastened, especially the small crevice suction nozzle and floor brush.

Precautions for using vacuum cleaners - check for abnormalities in time When there is an abnormal noise when using vacuuming, or when not vacuuming, check it in time, or send it to the vacuum cleaner to pay attention and put it in a dry place.

Introduction: Vacuum cleaner has a long history, because it has many advantages such as easy to use, cleaning, home, etc., it is favored by the majority of consumers, and is now a must-have for every family. However, some people still can't really understand it, and are skeptical about it, thinking that it is not clean, or traditional mopping cleaning is more reliable.

Now, Tuba Rabbit will lead you to a comprehensive understanding of it.

What is a vacuum cleaner? The main parts of a vacuum cleaner are a vacuum pump, a dust bag, a hose and an exhaust fan. Its working principle is that the exhaust fan inside the vacuum cleaner is under the action of current, that is, we usually say that the exhaust fan rotates after the power is on, and the vacuum cleaner inside the vacuum cleaner is at this time.

Because it is a vacuum, the air pressure inside is much smaller than the air pressure outside, and at this time, the dust and particles on the ground will be pressed into the inside of the vacuum cleaner by the atmospheric pressure, that is, sucked in. Then after the filtering effect of the dust bag, the garbage will remain in the dust bag. Just such a simple principle, convenient for every family.

We just need to turn on the vacuum cleaner and easily take the vacuum hole to walk around every corner of the floor, and we dare not say that it is spotless. At this time, if you still feel that it is still not clean, mop it with a mop again, and it will be absolutely spotless.

Precautions for the use of vacuum cleaners:

1. Use a vacuum cleaner, if there is too much paper scrap or peel on the floor, be sure to sweep it first to prevent the suction inlet from clogging and damaging the motor.

2. When using the vacuum cleaner, please pay attention to install the dust filter bag to prevent dust from entering the motor room.

3. Do not let the vacuum cleaner be exposed to the sun at high temperatures, which can easily cause the shell to fade or burst.

4. Do not use a vacuum cleaner to suck water or other liquids, as it is easy to rust or damage the internal parts when brought back.

5. Clean the vacuum cleaner with a damp rag, do not rinse it directly with water.

6. After using the vacuum cleaner, the vacuum cleaner and accessories should be wiped clean with a damp cloth and then dried in the air.

What brand of vacuum cleaner is good? Personally, I think Haier and Philips' vacuum cleaners are good. How to identify the quality of the vacuum cleaner when purchasing?

1. Listen to the sound of the motor, there should only be the sound of the wind, and there should be no other noise. And the quieter the better. 2Turn on the vacuum cleaner and put the palm of your hand close to the suction hole to see how the suction power is.

The more suction power, the better. 3. Look at the sealing of the vacuum cleaner, if there is wind overflow in the shell, it means that the sealing is not good, which directly affects the suction power and makes the vacuum cleaner more power-consuming.

The vacuum cleaner is indeed a good cleaning product, and I have one at home, which I personally feel quite practical. I always vacuum the dust first and then mop it down, and the floor is super clean and effortless. If you want to know more about vacuum cleaners, you can find information on the Internet or ask the salesperson in the mall.

You can get it for free