Ask for advice on the 3D MAX10 PC configuration

Although it is the previous one, it can be used as a reference in this regard, and if there is silver, the hardware can be changed to a better one

Referring to your requirements, you want to do some large-scale 3D drawing, so how big is this large-scale? To give you a reference (the largest diagram made by the following set of configurations is about 100m three-dimensional map, and it is very easy, without any jamming, and the estimated limit is at least 300m or more):

If your requirements are relatively high, such as the assembly of tens of thousands of parts, etc., it is estimated that there are more than 500M drawings, then it is best to have a server, probably at least more than 20,000, that is, more than dual CPUs + professional graphics cards, etc. The most important thing for ordinary graphics is CPU + memory (memory is very heavy), the server is an additional professional graphics card for graphics, if you require a fast speed to open the map, then it is best to have an SSD (solid state drive),

Motherboard: ASUS P8B75-V 799

cpu i5 3450 1180

Graphics: Ӣ GTX660 Blackscar 1499

Display LG M2631D 1299

HDD Seagate Barracuda 1TB 7200 rpm 32MB SATA3B 375

Memory: Kingston 8GB DDR3 1600 440 Power Supply, Gaming Titan, Red Star R500M, 299

Chassis Game Titan: Demon II Red Devil 149

It's very low, if it's equipped with a desktop, it's now the mainstream i5 processor (CPU), 1G independent display, 500G hard disk.

The main ones are the CPU, and the graphics card. Nothing else is important.

The above configuration is about 3500.

I remember when I was studying the sample school, I used a Celeron processor, it seems to be 1.78, and the memory is also that kind of SD128, all installed with this 3DMAX, learned, and it was not good when modeling, but if there were too many lines, it would be stuck, mainly when it was dyed, so now it is recommended to go to the above, and the graphics card is above 128, and the memory is more than 512, and he doesn't have any big requirements.

Processor with AMD for 3D

The processing is quite good, and the high cost performance is slightly worse than the Pentium.

I think Lenovo's F40A is more suitable for 3D Max, but I think it's more accurate to use 3D Max on a laptop than on a desktop.

At least you have to have a discrete graphics card, and a graphics card above 128M is good and hungry.

Motherboard: MSI B85-G41 PC Mate, B85 chipset, large board, 4 DDR3 slots, 2 graphics card slots, 549

CPU: E3-1230 V3 The latest Haswell architecture Zhiqiang processor, four cores and eight threads, the main frequency can be automatically turbo to, cache 8M, power consumption 80W, 1350 loose wafers.

CPU Radiator: Overclocking Three Yellow Sea Deluxe Edition, Pure Copper Heat Dissipation, Super Large Air Volume 45, Noise 18dB Super Quiet, 80

Memory: Kingston ADATA 8G, DDR3-1600 8G 1, 480

HDD: Seagate 2TB ST2000DM001 7200 rpm cache 64M, 539

Power supply: Great Wall HOPE-6000DS, rated 500W up to 600W, 259

Chassis: Xianma Raider 1 gaming case, power supply underneath, standard 2 12cm front cooling fan, 139

Recorder: BenQ DW24AS 24-speed serial port (can be used for disc duplicator), 120

Display: Huike T7000+, 27-inch screen (16:9), top H-IPS hard screen panel, best resolution 2560x1440, brightness 300cd, 2199

Total total installed capacity**: about 8314 yuan.

3D Max this software eats CPU and memory. Therefore, it is recommended to configure i7, if you want to configure a discrete graphics card, you can consider e3 1230v3, which is also an i7 core, but there is no integrated graphics card. E3 is recommended.

You can buy a heat pipe for a cooling fan, because the CPU is running at full speed when rendering, and the heat generation must be large, so it is best to buy a 4-pin fan to automatically adjust the speed. The bigger the memory, the better. It depends on how much money you invest.

At least 8g, 16g is better. The motherboard Z87 can be used in any Gigabyte, ASUS, and MSI. The hard disk is directly connected to the SSD 240G or more.

Power supply 400W or more. Graphics card 650 or 7770 will do, if you want to play games at the same time, then 760 770 R280, depending on what you need.

There are two possibilities for your computer to heat up, the first is because the computer does not dissipate heat, and the reason is that there is too much dust accumulation in the computer. The second is because your computer configuration is not good, the graphics card and memory are not good, 3DMAX is very memory-intensive to run, generally 1G memory is required for him to use, and then the graphics card, at least 512M graphics card. You first see if it's because your configuration is not good.

Ask me again. I'm getting you one, an assembly machine or an original one.

Buy Y480, the platform is better than this.

Take a look at what the minimum requirements are for this software.