If I bought a Cartier watch for two days and stopped 1 time, can I ask the merchant to change it?

No, the watch is a special nature of the product, once ** unless irreversible failure, it can never be returned.

The most reasonable solution after sales is to return the movement to the factory for you, and under the premise that it cannot be guaranteed to be repaired, the limit is to replace a movement for your watch.

After 3 hours, let's see if it's not right, you can ask for an exchange.

Room 2513, 25th Floor, Diwang Building (Shun Hing Plaza), No. 5002 Shennan East Road, Luohu District, Shenzhen, Guangdong Province] will answer for you.

Calcite is a big hand that does not move, and the usual length of a general three-eyed chronometer hand watch does not move, only the time is gone, and a small cap stock in the three small plates has been walking is the time.

If it is a mechanical watch, a mechanical watch, the error deviation is large, and there is no accuracy of a quartz watch. The purchased fully automatic mechanical watch may not exercise enough during the day during the week, and the error of the mechanical watch is insufficient, so before quitting the night study, the watch is swung up and down horizontally for about 10 minutes to fill the chain, and the error of the mechanical watch is all normal.

Automatic mechanical watches must be automatically interlocked due to the shaking of the arm, so they must be worn for more than 12 hours a day.

Is it very simple to repair, you can hang the chain, the watch hand falls off, swing it twice? If it's broken, it's just been repaired before. First of all, make sure that you are only moving the watch hand and that everything else is normal, and if everything else is normal, you will probably have to attach the chain.

Most fully automatic watches can be lifted manually. Especially when installing it for the first time or when you install it again after stopping walking, please first use the accessory of the manual lifting of the foot. I don't recommend raising the full chord with a fully automatic rotor.

In a manual winding watch, when it feels like there is no string on it, the accessories represented are full, but most of the fully automatic watches do not feel it. Therefore, there are many proposals for the winding frequency of fully automatic mobile phone watches. About 40 times is enough.

But it doesn't always need to be manually chained. Moisture-proof stickers that harm the head may jeopardize the moisture-resistant effect of the watch.

The reason why the watch stopped:

1. Mechanical watches, usually caused by the lack of power of the watch, you can fill the clockwork every morning, if you still keep stopping, it is recommended that you go to a professional maintenance point to let the master do a professional inspection.

2. Quartz watches are usually because the battery is about to run out, and it can be solved by replacing the battery.

Summary. The warranty period for a Cartier watch is one year! The exterior restoration service is carried out by the Cartier master watchmakers and includes the following items:

Disassemble the watch case completely; Replacement of wearable parts*: battery, seals, hands, crowns, etcDetection of magnetization and, if necessary, degaussing; movement detection and movement speed adjustment; ultrasonic cleaning of the case and metal bracelet; refitting the watch; Minimum 48 hours of time-keeping and power-reserve testing; Checking the water-resistance function of the watch; Straps: Inspection and adjustment of bracelets and folding clasps.

Can I replace a Cartier watch if it is broken within a year?

The warranty period for a Cartier watch is one year! The exterior restoration service, carried out by the Cartier master watchmakers, includes the following items: complete dismantling of the watch case; Replacement of wear parts*

Batteries, seals, hands, crowns...Detection of magnetization and, if necessary, degaussing; movement detection and movement speed adjustment; ultrasonic cleaning of the case and metal bracelet; refitting the watch; Minimum 48 hours of time-keeping and power-reserve testing; Checking the water-resistance function of the watch; Straps: Inspection and adjustment of bracelets and folding clasps.

Dear I bought a Cartier tank for half a year, and the time was slowed down by an hour. Can I get a new one?

You can ask the customer service, he may repair it for you, if the repair is not good, it should be replaced with a new one.

But this happened in half a year. I have the power to change it, no.

Dear, he can only repair it for you within a year, he is warranted, but if you want to say a new one, it is estimated that it will not work.

Hello dear. Cartier watches released three months over the counter to replace the ** nuclear type of Cartier watches is not cheap to change, if you buy luxury goods or need regular maintenance, whether it is to go to the counter or your own degree of use will be more cherished. Generally, Cartier watches go to the counter for repair or repair, and bring the warranty card directly.

How often is it better to maintain a Cartier watch1How often is it better to maintain a Cartier watch1If your Cartier watch is not necessarily worn, it is recommended to stop servicing it every 5-10 years. However, if you wear your watch for a short period of time per month, you should put it in the original watch case to avoid collisions, and stop the chain regularly so that it does not pause permanently.

2.If a Cartier watch is displayed every day, it can also be said to be a watch. If you find that your watch is faulty or submerged, it is best to send it to a watch repair center for repair as soon as possible.

If your Cartier watch is always working properly, it's best to use it every 3-5 years. However, some people have been wearing watches for 10 years. When they went back, they had never done watch maintenance.

By the time the problem occurs, the parts are already severely worn.

If you want to maintain the watch, or if there is a problem with the watch, it is recommended to go to a professional after-sales maintenance center to deal with it, you can click on the avatar to consult.

Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can be parked, but there are several main reasons.

1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.

2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.

3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.

There will be after-sales ** on your warranty link, call after-sales ** to inquire about the after-sales address.

There must be something wrong with that, and there is no regularity in the watch, for example, stopping in one place

The watch is not allowed to run inaccurately:

1.Lack of power, mechanical watches are divided into manual mechanical watches and automatic mechanical watches, insufficient power is an important reason for the watch to slow down or stop the watch, manual mechanical watches can be wound directly when slow, and the reason why automatic mechanical watches are slow is mostly because of insufficient wearing time or the arm does not maintain a normal amount of exercise, and can be directly manually wound to supplement power.

2.There is no maintenance, mechanical watches are generally maintained once every 2 to 3 years, the watch is used for a long time, the lubricating oil in the movement will dry up, and the friction of each gear will produce iron filings for a long time, increasing the friction between the gears, this kind of problem only needs to clean the movement and re-refuel.

3.By impact, the mechanical watch has a complex structure, which is composed of hundreds of precision parts, which is very fragile, and the watch is subjected to a strong impact, and the parts in the movement may loosen and cause the watch to slow down or stop. According to the reason why the watch is slow, you can take corresponding measures, pay attention to the winding of the manual machinery, maintain the normal amount of exercise of the automatic mechanical arm, maintain it on time, pay attention to the watch waterproof, shockproof and anti-magnetic, and send it for repair in time if there is a problem.

The watch should be maintained every 1 to 4 years, replacing the waterproof components, checking the function of the time and the power consumption of the movement, cleaning the movement and maintaining the appearance. This kind of maintenance will effectively extend the service life of your mechanical watch.

Daily maintenance of Cartier watch Normal wear to avoid vibration: there is an appropriate amount of activity in order to make it continue to be on the bar and operate normally (it is normal for the wearer to walk slowly when the amount of activity is small.) Please rotate the handle 20-30 times when using it for the first time to make the initial winding of the mainspring), although the watch is shockproof, it is easy to break the tip of the pendulum shaft or the journal of the wheel train when the external impact is strong, and it can also make the fast and slow needle vibration affect the time.

Prevent magnetization: Although the watch is made of non-magnetic materials that are not easy to magnetize, it is greatly affected by magnetic fields, such as the magnetic buckle on the TV, radio speaker, backpack or leather bag. The watch is water-resistant:

Do not wear your watch to swimming, wash clothes, rain or get wet, do not pull out the watch at this time to adjust the time, because it will dry immediately. Because the handle head is more protruding, try to avoid it being bumped, and pay attention to the gap between the handle head and the case, too small will affect the operation, and too much will affect the waterproof performance, but also unsightly. Watch Cleaning:

Mechanical watches are generally cleaned and maintained once every two to five years, which is determined by the following factors: Sealing problems of the watch Degree of wear (degree of wear) of the watch Quartz watches can extend the oil washing cycle Men's or pocket watches can have a longer oil washing cycle than thin or women's watches. If you do not wear the watch for a long time, do not place it in the suitcase with mothballs and sanitary balls, which will cause the watch oil to deteriorate, and the watch machine will not be clocked or worn every month at an inaccurate interval to ensure the normal operation of the movement.

The speed of a mechanical watch is mainly determined by the pendulum frequency, usually the larger the pendulum amplitude, the smaller the pendulum frequency, and the smaller the pendulum amplitude, the greater the pendulum frequency. Generally, watches rely on the retraction and release of the hairspring to control the swing, which is the basic principle of adjusting the speed and slowness. If the hairspring is longer, the swing will increase, the frequency will be smaller, and the watch will be slower; Conversely, the more the pendulum frequency increases, the faster the watch will be.

The effect of the magnetic field and the balance of the balance wheel and the balance spring will also cause the watch to stop and go, especially the balance wheel, the balance wheel is very poor, which will cause the balance wheel to highlight the surface precision change under a certain swing.

Stop, there may be the following reasons:

1. See if the crown is pulled out, the crown is pulled out, and the watch stops.

2. Whether the second hand touches the glass, there will be a circle mark on the glass.

3. Whether the three watch hands are not well balanced, causing contact and causing stopping.

4. Whether the battery is exhausted or not, it generally needs to be replaced in 1-2 years.

In fact, there are many reasons why mechanical watches do not go, such as: bumps, movement gear misalignment, magnetization of the watch, shelving for a long time, sludge drying, etc., generally divided into two kinds, the first is because of insufficient kinetic energy. The second is due to a malfunction of the mechanical watch.

Therefore, don't panic too much when you find that the mechanical watch is not leaving, and first distinguish which kind of big one it belongs to.

1. Insufficient power reserve. You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of speed and slowness, if it is still recommended to go to the store for testing.

2. The power is insufficient. If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy.

3. Having been beaten or impacted. The watch is very tight, if it is hit or dropped, it may cause loose damage to the internal parts, and it may also cause time problems, so it is recommended to go to the store for testing.

4. Maintenance is required. A lack of oil or wear and tear of the internal parts of the movement can cause time-keeping problems and require maintenance.

5. Under the influence of ambient temperature, the watch is magnetized: if the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the error of the time, which will be sent to the store.

Note: 1. Mechanical watches vary according to the model and manufacturing quality of the movement, and the error of the general watch within 30 seconds per day is within the normal range. Some of the higher precision movements can reach around 10 seconds.