What to do with an iPhone XS with water on your phone?

1.Do not shake the body when powered on.

Once your iPhone gets water, it should be turned off immediately. Keeping the computer on in the case of water ingress will form eddy currents, cause short circuits, and the motherboard will burn out. So never turn it on.

2.The first thing to do after shutting down.

After shutting down, first wipe off the water on your phone's case with a towel. Then quickly unplug the SIM card and keep it somewhere else. Next, use a paper towel to suck up the water from the headphones, dock and SIM card slots.

3.Use a damp towel to wipe off hard-to-remove stains.

There are also many types of flooding and flooding. For example, in addition to fresh water, there are muddy water, sea water, fruit juice, etc. If fresh water enters the phone, you can wipe off the water with a towel after turning it off. If water enters the interface of the mobile phone, it can be removed with a paper towel or cotton swab.

1.Do not try to turn on the device immediately if there is water ingress. Because the iPhone has a built-in battery that cannot be removed, the motherboard will be short-circuited if it gets into the water, and if it is turned on, the motherboard will be burned, causing irreparable consequences.

2.You can first use toilet paper to dry the water outside the mobile phone, and then place the mobile phone screen horizontally to prevent water from flowing to the motherboard, and then use a blow dryer to dry the water, and turn on the temperature at medium or small temperatures.

3.Wipe down the circuit board with anhydrous alcohol and try to turn it on. Because alcohol volatilizes quickly, the moisture on the circuit board can be volatilized clean.

4.Send it to a repair center for repair as soon as possible. If the motherboard is severely corroded over time, it will cause irreparable consequences.

5.Make an appointment in advance for after-sales repair to waive the mobile phone cleaning fee of 299 (limited-time event).

After soaking in water, disassemble the phone as soon as possible, remove the battery, then wipe it off, blow it out on a low temperature setting to dry the visible moisture, and finally send it for repair.

Generally, the mobile phone needs to see the state of the water ingress, for example, all fell into the water, that is the need to be sent to the maintenance point to water treatment, of course, according to the performance of the mobile phone, some mobile phones have a good waterproof function, it does not hurt, the main thing is to face the difference, after all, some how to prevent it, if the water enters, it must be sent for repair, and the components inside are the most afraid of water.

First of all, you have to wipe your phone clean, and then use a hair dryer to dry it, if it really doesn't work, send it to the repair shop, and let the maintenance master take care of it for you.

The most important thing is to remove the battery immediately, and wipe the moisture inside and out, if the battery is not removed, it is easy to cause an internal short circuit and the motherboard will be scrapped.

The first time the mobile phone enters the water, it should be turned off immediately, and then taken to a nearby mobile phone store to be disassembled and dried, and then the damage should be detected.

1.Swim or take a shower with your iPhone;

2.Placing your iPhone in water with high pressure or flow rates (for example, showering, water skiing, wakeboarding, surfing, or jet skiing, etc.);

3.use of iPhone in the sauna or steam room;

4.deliberately submerging your iPhone in water;

5.Use your iPhone in extremely cold or excessively hot temperatures, or in extremely humid conditions;

6.Causing your iPhone to fall to the ground or subject it to other impacts;

7.Disassemble your iPhone yourself, including unscrewing the screws.

How to deal with the water after the iPhone is ingressive.

1.Turn off the phone as soon as possible, cut off the power, and do not try to turn it on again to avoid causing a short circuit in the motherboard.

2.Remove the SIM card and use a tissue or cloth to remove water from the outside and crevices of the phone.

3.If there is light water ingress, you can wrap the phone with a paper towel, put it in a bag and put it in a small bag of desiccant.

4.The mobile phone cannot be turned on after entering the water, most of the chips such as the motherboard and CPU are short-circuited and burned, and it is recommended to send it to the after-sales service center for repair immediately.

Don't try the following wrong methods after your phone gets into water.

1.Don't shake your phone too hard. Because under the constant shaking, the liquid will swim inside the machine, and the moisture may enter deeper and burn the internal chip of the machine.

2.Don't use the hot air of a hair dryer to dry your phone for a long time. iPhones are now all metal bodies, and metal conducts heat easily, which will blow off the solder joints of the motherboard inside the machine, causing the motherboard to malfunction.

3.Do not attempt to charge a phone that has been flooded. An iPhone that gets into the water may have water stains inside, which can burn out the motherboard when it is powered on and cause a more serious failure.

4.Do not leave your phone in water for a long time. In the case that it cannot be used normally after two or three days after general treatment, it should be sent for repair immediately, and long-term placement will cause the motherboard to be corroded, or even unable to be repaired.

Don't panic when the phone gets into the water, wipe it dry and take it to the repair place. Find a staff to repair it.

If the mobile phone gets water, first of all, be sure to turn it off, do not use it, then dry the water stains, and put it in the rice to absorb moisture.

1.Clean the water ingress area in order, quickly remove the SIM card, and wipe the water in the iPhone shell, dock interface, and SIM card slot.

2.Don't shake your iPhone. If you shake your iPhone, water will flow and water may expand inside your iPhone.

Do not try to turn on the machine immediately after water ingress. Once you try to boot it, it will increase the area burned out by the motherboard by short circuit.

4.Do not turn on the machine immediately after absorbing or wiping off the water. It is essential for a professional to clean the moisture of each chip of the internal motherboard.

5.Contact a repair center for inspection and repair.