What should I do if my phone gets into water? What should I do if my phone gets into water?

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not use a hair dryer to blow or bake at high temperature (including microwave heating) after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. The mobile phone is composed of precision electronic components, and there is a potential risk after water ingress, so please keep the mobile phone turned off.

4. If you don't have a backup data, there may be a risk of data loss during repair.

If the phone accidentally gets into water, you can try the following ways to deal with the phone urgently to avoid secondary injury: Take the phone to a dry and ventilated place, and use a dry paper towel or towel to blot the water stains on the surface of the phone. If the phone is turned on, press the power button to power off; If the phone is turned off, please do not try to turn it on, and do not shake or shake the phone frequently after the phone gets into the water to avoid moisture in the phone.

Many people think that the mobile phone is broken, but in fact, there is no need to repair it, and it is good to use it at home.

Water ingress on the phone. Whether it falls into a basin of water or is covered with water, it is a serious problem. If it is more serious, it is likely to lead to the direct scrapping of the mobile phone.

What should I do if my phone gets water? You must know this first aid method!

If you are using a vivo mobile phone, the liquid inlet treatment method of the mobile phone:

1. Don't force it on, it is likely to cause a short circuit in the phone;

2. Don't shake the phone hard;

3. Don't heat up your phone;

4. Blot the liquid on the mobile phone, you can use toilet paper and other tools to absorb the water in the gap of the mobile phone, and absorb the water in the mobile phone as much as possible. When absorbing water, try not to move your phone;

5. Place the mobile phone in a ventilated and dry place, and let the excess moisture on the surface of the mobile phone air dry naturally;

6. Customer service center processing: enter the vivo official website vivo**app--my--outlet query or vivo official website web version--scroll bottom--service support--service network query--select the province and city to query the customer service center address.

Step 1: Shut down.

After picking up your mobile phone, you should press and hold the power button to turn off the power button as soon as possible, because water will slowly seep into the circuit, and it is easy to cause a short circuit in the mobile phone when it is turned on.

Step 2: Ventilation.

In order to avoid more damage to the phone, quickly wipe the moisture on the phone with a paper towel, and do not let go of the charging port and earphone port, then take out the SIM card and memory card, and place the phone in a dry and ventilated place. The "put the mobile phone in the rice to dehumidify" circulated on the Internet, or try not to be gullible In case the mobile phone is not saved, the charging port is also blocked by the rice, and the gain outweighs the loss However, in case the moisture in the mobile phone is not cleaned up, it may cause damage to the mobile phone device after turning on, in order to reduce the risk, it is better to go to the after-sales inspection Kangkang

The third step is to go to after-sales.

If the phone is flooded with a lot of water, or other mixed liquids, such as seawater and vegetable soup (salty liquids), even if it dries, it will still accelerate metal corrosion after being wet, and must be cleaned up

To deal with it properly after your phone gets into water, here are a few wrong ways and the right way:

1. Wrong method:

1.Dry with a hair dryer.

2.Shake the phone to dry.

Second, the correct way:

1.Dry the surface moisture with a paper towel and cotton swab.

2.Rice and desiccant blotting method.

3.Rice cooker steaming method.

Today's mobile phones are not only powerful, but also faster and faster, and in the past two years, there is one more waterproof function, but the waterproof function of most mobile phones can only prevent water from accidentally splashing in life, or water in a very short time. I believe that many friends have also had the experience of water entering the water, so how to deal with the water if the mobile phone is in the water? Let's take a look!

1. Wrong handling methods.

1.Use a hair dryer to dry. The first thing that many friends think of after the mobile phone gets into the water is to use a hair dryer to dry, but the fact is that blowing with a hair dryer is easy to overheat and cause damage to the internal parts of the mobile phone.

2.Shake the phone to dry the water. When the mobile phone has just entered the water, many people think that the water has not yet entered the inside of the mobile phone, so they think about drying it, but doing so is actually very easy to aggravate the failure of the mobile phone.

Generally, if the water is not properly disposed of after entering the water, the mobile phone will basically be scrapped, and it is recommended to buy it again.

Second, the correct way to deal with it.

1.Wipe off surface moisture with a paper towel and cotton swab. After the mobile phone gets water, first turn it off, then use a paper towel to dry the moisture in a large area such as the mobile phone screen, and then use a cotton swab to gently absorb the water at the earphone hole, charging hole and speaker.

2.Rice and desiccant water absorption method. After wiping off the surface moisture, you also need to absorb the moisture inside the phone, if you have desiccant at home, you can bury the phone in the desiccant, if you don't bury it with rice, you can probably wait for half a day to do it a day or so, wait for the phone to dry completely before you can try to turn it on.

3.Rice cooker steaming method. This method needs to be grasped more accurately to be effective, first heat the rice cooker, then adjust to the keep warm mode, and then wrap the watery mobile phone with newspaper, put it in the rice cooker, and use a dry and certain temperature environment to evaporate the water of the mobile phone.

But if it's not very necessary, don't try it, because it's easy to burn out your phone if you don't grasp it well.

1. Wipe dryingThe longer the soaking time, the greater the damage to the parts of the mobile phone, and then quickly dry the surface moisture of the mobile phone, pay attention not to turn on the machine in this process, so as not to penetrate the moisture of the mobile phone and expand the damage to the mobile phone parts.

2. Wind blowing treatment:The battery of the preliminarily processed mobile phone should be removed, and the all-in-one machine can be handed over to a professional maintenance personnel to disassemble, and then the hair dryer should be adjusted to the low-temperature windshield to blow the mobile phone, especially the small holes such as the radio hole, microphone, and headphone hole of the mobile phone that are easy to enter the water.

3. Rice processing:Dry the phone still do not turn on, you can put it into the rice, the rice can completely absorb the moisture inside the phone, you can also use desiccant instead of rice to treat the phone, which can play a role in further water absorption, and so on to ensure that the moisture in the phone is completely dry, and then install the battery to turn on the check.

4. If the mobile phone is flooded, or other mixed liquids, such as seawater and vegetable soup (salty liquids) even if they are dry, they will still accelerate metal corrosion after being damp, and they must be cleaned up.

If you use a vivo mobile phone, the mobile phone liquid treatment method:

1. Shut down immediately and take out the SIM card and SD card; Do not force it on, it is very likely to cause a short circuit.

2. Lay the fuselage flat, use a paper towel or soft cloth to absorb water, and try to absorb the water in the gaps; When absorbing water, try not to move your phone;

3. Do not attempt to charge; Don't shake your phone too hard; Do not heat your phone.

4. Stand in a ventilated and dry place, and place it with the screen facing up and the front camera tilting upward;

Here's how to do it:

When the phone falls into the water, it is mainly handled by the following steps:

Step 1: Fish out your phone.

If the phone falls into the water, it is a must to get it out quickly. Moreover, what you need to do is to fish out the phone with the fastest speed and the most agile skill.

Step 2: Remove the battery.

This step requires that no matter whether the phone is turned on or off when it falls into the water, the battery of the phone must be removed immediately after the phone is fished out of the water. And, what you have to do is, don't press any keys, don't turn it off or on, just remove the battery.

Step 3: Remove moisture.

The correct way to remove moisture from your phone is to use a clean towel to quickly wipe your phone and make sure that the water does not flow into the phone's charging port, headphone jack and other sockets. It is important to note that during the process of removing moisture from the phone, it is important not to dry it in the sun, use a hair dryer, or bake it next to the stove, because the heat from the outside can damage the delicate electronic components inside the phone. In addition, if there are water droplets in the screen of the mobile phone, you need to shake the mobile phone vigorously at this time, the purpose is to shake off the water droplets inside the mobile phone screen, so as to avoid leaving traces of water droplets in the screen of the mobile phone after the water is removed.

Step 4: Drying.

The most common way to dry your phone is to leave it in a dry rice bag for 24 to 36 hours, or even longer. Then, take out the phone, and the phone can basically return to a dry and normal state.

Practice has proved that when the mobile phone falls into the water, the above four steps are the simple, convenient and easiest to operate emergency methods.

2. If your phone is falling straight into the water, or only the lower half of the phone is falling into the water, then put the phone vertically. If your phone is flat in the water, place it horizontally, not upside down.

Quick-drying strategy - use a hair dryer to dry.

Can't wait to dry naturally and want to use your phone soon? Then this method can also be tried.

First, take out the phone that accidentally fell into the water and use a paper towel to absorb the surface moisture. Pay attention to the headphone jack and charging socket part with a cotton swab or roll the toilet paper into a thin strip of paper to suck up the water, do not use a toothpick to stuff the paper ball directly into it, a accidentally can not take out the paper ball will outweigh the loss.

After absorbing water, use the cold air of the hair dryer to dry the mobile phone, but do not use the hot air function of the hair dryer, the conductivity of the water and the high temperature of the hot air may cause the battery interface to leak or the internal circuit short circuit to burn the mobile phone.

At this time, generally speaking, the phone's battery will release power quickly, and it will run out of power after a while.

Do not force charging with a fluke mentality, the Buddha fully causes the burning of components is small, and may even cause a short circuit or ** of the battery, then it is really a heavy loss.

Try to keep your phone in its pre-water position throughout the process – either vertically or flat, as mentioned above.

It is recommended to last for more than 15 minutes, and it is best to leave the phone for more than 5 hours after drying it before trying to turn it on.

Professional-level strategy - rice quick-drying method.

This method uses the principle that rice is extremely absorbent – burying a mobile phone in the rice for 24 hours is roughly equivalent to 72 hours in the air.

Remove the phone that accidentally fell into the water, wipe it with the method mentioned above, and then wipe it out of the water and wipe it clean with a paper towel.

If it is an iPhone battery that cannot be disassembled, put it directly in rice and wait for 24 hours; For other types, quickly pull out the battery, etc., and then put the mobile phone and battery in the rice.

In addition, it is important to note that the earphone port and charging socket should be treated with water absorption before putting in the rice, and these sockets should be taped before putting in the rice.

There are 3 types of situations:

1. Drop into clean water when the power is on;

2. Fall into non-corrosive liquid in the case of power failure;

3: Drop into non-clean water when the power is on, or corrosive liquid or viscous liquid or other clean liquid regardless of whether the power is on or not.

First of all, for the 1st and 2nd cases, we must not think that the machine has been scrapped. Don't think it's already in the water anyway, so you disassemble it indiscriminately. The following I would like to put forward my personal suggestion for various situations, in the case of power-on, it falls into clean water, which generally does not need to be disassembled.

Turn off the power as soon as possible and shake it dry vigorously, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying. Place under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate.

This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry. After these three steps of processing, the power supply can basically work normally.

Drop into a non-corrosive liquid in the event of a power outage. In this case, it can be basically recognized that the machine is not damaged. But maybe the LCD screen will be more ugly.

Shake it dry, but don't shake it off. If there is no trace on the LCD screen, it shall be processed according to Article 3 of the first point. If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly.

It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

Falling into non-clean water when the power is on, or falling into corrosive liquids or sticky liquids such as thick liquids or other clean liquids regardless of whether the power is applied or not. This situation is the most troublesome. However, there is also a good chance that the machine will recover after proper treatment.

Turn off the power as soon as possible, and if it falls into a corrosive liquid (such as seawater), rinse the machine with clean water immediately. Or immerse the machine in clean water and try to dilute the corrosive liquid inside, and disassemble the machine as soon as possible. But when disassembling the machine, you should take it slowly, clean it with alcohol or professional washing water, or hand over the whole pile of things you dismantled to the maintenance point, and let the maintenance cavity start point to clean and assemble it for you again.