How the touch screen controls multiple drives

There is no need to set an address for the touch screen, just set each inverter to a different address. Regarding how to set the address of the inverter, you should read the manual, or provide the inverter model for everyone to check for you.

The mailing address depends on the manual of the strain inverter, and it is estimated that you need to write the driver with the touch screen macro.

Different inverters set different station numbers, and the communication does not affect each other.

Hello, specific touch screen models and inverter models!

Hello, I am glad to serve you and give you the following answers: A: The situation that the frequency of the touch screen and the inverter is not the same may be caused by the improper setting of the touch screen, and the steps to solve the problem are as follows:

1.Check whether the frequency setting of the inverter is correct: check whether the inverter settings are consistent with the settings of the touch screen, if not, you need to adjust the frequency setting of the inverter to be consistent with the settings of the touch screen.

2.Check whether the frequency setting of the touch screen is correct: check whether the settings of the touch screen are consistent with the settings of the inverter, if not, you need to adjust the frequency setting of the touch screen to be the same as the settings of the inverter.

3.Check whether the power supply is normal: check whether the power supply of the touch screen and the inverter is normal, if the power supply is not normal, you need to check whether the power cord is connected, check whether the power socket is unplugged, or check whether the power supply bucket is damaged.

Personal tip: Before adjusting the frequency setting of the inverter and touch the neutral screen, be sure to check whether its power supply is working properly to avoid wasting time due to power problems.

Hello, it is a pleasure to serve you and give you the following answers:1Reason:

However, the setting of the inverter is incorrect, or the setting of the touch screen is incorrect, or the connection between the inverter and the touch screen is incorrect. 2.Workaround:

1) Check the settings of the inverter to ensure that the output frequency of the inverter is consistent with the setting of the touch screen. (2) Check the settings of the touch screen to ensure that the frequency of the touch screen is consistent with the setting of the inverter. (3) Check the connection between the inverter and the touch screen to make sure the connection is correct.

3.Personal tips: (1) When adjusting the frequency between the inverter and the touch screen, you should first check the settings of the inverter, then check the settings of the touch screen, and finally check the connection between the inverter and the touch screen.

2) When adjusting the frequency between the inverter and the touch screen, you should ensure that the output frequency of the inverter is consistent with the input frequency of the touch screen to ensure the normal communication between the inverter and the touch screen.

The frequency of the touch screen and the inverter are not the same, which often leads to problems such as malfunctions**, unstable pressure changes, etc. In order to properly adjust the frequency of the touch screen and the inverter, it is necessary to understand the basic working principle of the inverter. The inverter is a circuit used to control the speed of a DC motor or an AC motor, and it can adjust the speed of the motor according to external settings, such as the set frequency.

It consists of an oscillator, an amplification circuit, a transformer, and a frequency converter chip, which are responsible for oscillation, amplification, voltage transformation, and frequency conversion, respectively. Generally speaking, to adjust the frequency of the touch screen and inverter, the following ridge circle steps are required: Step 1:

Confirm whether you want to use an AC or DC motor. Step 2: Set the oscillation frequency of the inverter, usually 50Hz-800Hz, the specific setting depends on the requirements of the motor being controlled.

Step 3: Adjust the knob on the touch screen to set the frequency value displayed on the touch screen, which should match the previously set frequency oscillation frequency value of the inverter. Step 4:

According to the actual needs of the user, adjust the speed of the inverter to control the motor, and adjust the knob corresponding to the touch screen according to the current speed in the collapse control room, so as to ensure that the frequency of the touch screen display is inconsistent with the inverter setting. Step 5: Repeat the above adjustment process until the frequency value displayed on the touch screen is consistent with the frequency setting value of the inverter, and finally adjust it according to the actual situation.

In general, adjusting the frequency of the touch screen and the inverter requires a certain understanding of the working principle of the inverter, as well as a good understanding of the knob and inverter settings in the adjustment process, so that the frequency displayed on the touch screen is consistent with the frequency set by the inverter. Finally, after setting the frequency of the inverter and the frequency of the touch screen, the speed of the motor is controlled by the inverter, which is an effective method for correct adjustment.

Hello, I am glad to serve you and give you the following answers: 1. The reason for the situation: the frequency of the touch screen and the inverter is different, which may be due to the problem of the setting of the inverter, or due to the improper setting of the input parameters of the touch screen.

2. Solution: First of all, check the settings of the inverter to ensure that the input parameters of the inverter are set correctly and match the input parameters of the touch screen; Secondly, it is necessary to check whether the input parameters of the touch screen are set correctly to ensure that they match the input parameters of the inverter; Finally, check whether the output parameters of the inverter are set correctly to ensure that they match the output parameters of the touch screen. 3. Step by step teaching:

1) First of all, check the input parameters of the inverter to make sure that its settings are correct and match the input parameters of the touch screen; (2) Secondly, check the input parameters of the touch screen to ensure that its settings are correct and match the input parameters of the inverter; (3) Finally, check the output parameters of the inverter to make sure that it is set correctly and matches the output parameters of the touch screen. 4. Personal tips: When adjusting the frequency of the inverter and the touch screen, be sure to carefully check the input parameters and output parameters of the inverter and the touch screen, and make sure that the front is hidden to avoid inconsistent frequencies.

Hello, it is a pleasure to serve you and give you the following answers:1Reason:

It may be that the inverter is set incorrectly, or the touch screen is set incorrectly, or the connection between the inverter and the touch screen is incorrect. 2.Workaround:

1) Check the settings of the inverter to ensure that the output frequency of the inverter is consistent with the design of the touch screen. (2) Check the settings of the touch screen to ensure that the input frequency of the touch screen is consistent with the setting of the inverter. (3) Check the bridge or connection between the inverter and the touch screen to make sure the connection is correct.

3.Personal tips: (1) When debugging the frequency inconsistency between the inverter and the touch screen, you should carefully check the settings of the inverter, the settings of the touch screen and the connection between the inverter and the touch screen to ensure that the output frequency of the inverter is consistent with the input frequency of the touch screen.

2) When debugging the frequency inconsistency between the inverter and the touch screen, it should be noted whether the unit of the output frequency of the inverter and the input frequency of the touch screen is consistent, and whether the output frequency of the inverter and the input frequency of the touch screen are consistent.

Summary. Dear and provide you with the following process: 1. Check whether the connection line between the touch screen and the inverter is connected; 2. Check whether the output frequency of the inverter is correct; 3. Check whether the input frequency of the touch screen is correct; 4. Check whether the input frequency of the touch screen is consistent with the output frequency of the inverter; 5. If there is no problem with the above steps, you can try to replace the touch screen or inverter to ensure that the frequency of the touch screen is consistent with that of the inverter.

Dear and provide you with the following process: 1. Check whether the connection line between the touch screen and the inverter is connected; 2. Check whether the output frequency of the inverter is correct; 3. Check whether the input frequency of the touch screen is correct; 4. Check whether the input frequency of the touch screen is consistent with the output frequency of the inverter; 5. If there is no problem with the above steps, you can grind the core to try to replace the touch screen or inverter to ensure that the frequency of the touch screen and the inverter is consistent.

Fellow, I really didn't understand, I can be more specific.

Hello, the specific steps are as follows: 1. Open the inverter, press the "Set Jujube" button, and enter the inverter setting interface; 2. Press the "Setting" button to enter the inverter parameter setting interface; 3. In the parameter setting interface, find the "Input Frequency" parameter and set it to the frequency set by the touch screen; 4. Press the "OK" button to save the parameter settings; 5. Press the "Run" button to start the inverter, and the frequency of the inverter is consistent with the frequency set by the touch screen in the banquet hall.

Hello! The inconsistency between the frequency of the touch screen and the inverter may be caused by the incorrect stare in the Kaiyan zone of the inverter or the change in the output frequency of the inverter. Therefore, to solve this problem, first of all, check whether the setting of the inverter is correct, if the setting of the inverter is wrong, you can re-set the frequency of the inverter according to the instruction manual of the inverter, to ensure that the output frequency of the inverter is consistent with the frequency of the touch screen.

In addition, if the output frequency of the inverter changes, it may be caused by a change in the power supply voltage of the inverter or a change in the temperature of the inverter. Therefore, to solve this problem, it is necessary to check whether the power supply voltage of the inverter is stable, and whether the temperature of the inverter is stable, if the power supply voltage or temperature of the inverter changes, corresponding measures can be taken to stabilize the output frequency of the inverter to ensure that the output frequency of the inverter is consistent with the frequency of the touch screen.