Why does there be 2G traffic but the traffic is exceeded, and the fee is deducted?

There are traffic deductions mainly for the following reasons:

1. Query the bill to see if the traffic exceeds the deduction or the traffic is deducted on a monthly basis.

2. Check whether the remaining traffic is general traffic or directional traffic, and the directional traffic can only be used online within the specified range or time.

3. The order of traffic usage is in order, reply to "Traffic Usage Priority" to view the order of traffic usage.

If you have any questions about the charge, you can contact the local 10086.

2. Activate 2G traffic SMS reminder: Send SMS 5201 or 2GKTTX to 10010 to activate the traffic SMS reminder service, the default weekly reminder, every Monday from 9:00 a.m., the system will automatically send traffic reminder SMS, and you will receive SMS prompt after successful activation.

3. If you need to set the traffic reminder by day, you can try to send ATTX to 10010 for processing. If you are unable to handle it, it is recommended that you consult Unicom's customer service for relevant handling methods.

g. The postpaid system automatically sets daily reminders.

Some traffic is subject to location and time restrictions.

Pay attention to the words "intra-provincial traffic", "domestic traffic", "free time traffic", and so on.

Hello dear. The reasons and solutions for the mobile phone in 2G traffic are as follows: 1. It may be caused by the poor mobile phone network, at this time, you need to check the network situation, open the settings in the mobile phone, and then turn on the airplane mode in the settings, wait for 10-15 seconds and then turn off the airplane mode and refresh the network to see if the signal is a 2G network.

2. It may be because the mobile phone operator is not providing network services due to the arrears of the mobile phone, resulting in a 2G signal, at this time, you need to call the customer service of the mobile phone operator** to check whether there is still a phone bill in the mobile phone card, if it has been shut down or in arrears, the mobile phone card will be re-paid for the phone bill, and wait for 5-8 minutes to turn off the mobile phone network and turn it on again. 3. It may be that the location of the mobile phone card slot is wrong, some mobile phones that support dual SIM dual standby have regulations when choosing the card slot, such as one card slot supports 4G network, and the other card slot only supports 2G network, etc., at this time, replace the mobile phone card with the Shen Bixiang card slot, and then refresh the network. 4. There may be ** incoming calls, resulting in the mobile phone network temporarily becoming a 2G network, and the mobile phone network will automatically recover after the mobile phone call hangs up.

5. It may be due to network failures and other problems caused by the system, at this time, you need to turn off the mobile phone and then restart, or restore the mobile phone to factory settings, and the mobile phone network can be restored.

You can call 10010 to talk to the customer service manager directly to see if you can change it to ** or something.

Different China Unicom**The tariff is different after the traffic is exceeded:

1) After China Unicom Wo 3G** traffic is exceeded, the tariff is Yuan K.

2) After the ordinary 2G** traffic is exceeded, the tariff is mostly yuan K.

3) China Unicom's 4G local combination set, the deduction fee is RMB MB after the traffic exceeds.

4) China Unicom's 4G national combination**, after the traffic exceeds, it will be deducted RMB MB.

5) Unicom 4G Nationwide**, the deduction fee is Yuan MB after the traffic exceeds, and the other 4G Nationwide ** has a function of safe use of traffic, and 4G Nationwide** Unified use of external traffic is assured of using the function.

That is, the external traffic is billed according to the yuan MB, when the monthly cumulative reaches 60 yuan (i.e. 200MB), you will get an additional 824MB free traffic (i.e. 60 yuan GB), when your ** external traffic exceeds 1GB, it is still billed according to the above principle (that is, every excess of 200MB is billed according to 60 yuan GB), and so on.

Logo: China Unicom's corporate logo is an evolution of the ancient Chinese auspicious graphic "Pan Chang" pattern. The lines that circulate through the loop symbolize the orderliness of China Unicom as a modern telecommunications company, the smooth flow of Schindler and the inexhaustibility of China Unicom's business.

The logo shape has two obvious "hearts" connected up and down, which vividly shows China Unicom's communication and service tenet, and will always be for the sake of users and connected with the user's heart.

China Red: The color of the national flag, which represents enthusiasm, unrestrained and energetic, is the most representative color of the Chinese complex. The red color, which symbolizes happiness and good luck, increases the affinity of the corporate image and gives people a strong sense of visual impact, which is consistent with the corporate positioning of vitality, innovation and fashion.

Ink black: the most inclusive and cohesive color, it is a symbol of nobility and stability. The combination of red and black has a visual aesthetic of stability, harmony and tension.

Hello, I am happy to serve you and give you the following answers: The reasons for China Telecom's traffic exceeding 2G charges: 1. The traffic used by users exceeds the 2G traffic specified in **, so the excess part of the fee needs to be charged.

2. The traffic used by the user exceeds the 2G traffic specified in **, so the excess part of the fee needs to be charged. Solution: 1. Users can choose to purchase higher traffic to avoid charges for exceeding the traffic.

2. Users can choose to purchase traffic packages to supplement the excess traffic. 3. Users can choose to replace the ** with a higher flow rate to avoid charging for exceeding the flow rate. Personal Tips:

1. When purchasing, users should choose the appropriate traffic according to their own usage to avoid charges that exceed the traffic. 2. Users can check their traffic usage regularly in order to replenish the traffic in time and avoid charging for exceeding the traffic. 3. Users can check their traffic usage regularly in order to adjust ** in time and avoid charges that exceed the traffic.

Hello, for mobile phone Internet access, when the user's ** traffic is used up, the operator's billing system will send a text message reminder, and the data of the SMS reminder is for reference only, the specific usage is subject to the phone bill, and there are two main situations regarding the delay in receiving SMS and the problem of not being able to receive SMS reminders:

1. Due to the delay in the settlement of traffic bills, it takes a certain process to trigger the SMS reminder after the bills are put into the warehouse, and the user uses a large amount of traffic in a short period of time (such as: software, ******, chat, etc.)** The traffic is not triggered in time after the traffic is used will cause this problem. It is recommended that you use third-party traffic monitoring software or through the mobile hall and network hall to understand the traffic usage in real time every day.

2. If your mobile phone has third-party mobile assistant software installed, such software may include the 10010 SMS port in the blocking list, and it is also possible that the user terminal cannot receive consumption reminder SMS, it is recommended that you check whether there is a third-party mobile phone assistant software set up to intercept.

Method 1] Click "Service Query, Traffic Business Query, Internet Traffic Details";

Method 2] Click "Service Query, Traffic Service Query, Internet Access Record".

Warm reminder: 1. If you find that the mobile phone has traffic left, and now you have been deducted the traffic fee, it may be because the remaining traffic is beyond the scope of use, such as the community traffic needs to be used in the designated area, and the idle traffic can only be used in a specific period of time, directional traffic.

It can only be used within the specified business scope, etc.;

2. It is recommended to turn on the mobile phone traffic monitoring software and set the traffic usage threshold, so that you can pay attention to your traffic usage at any time.

Hello, I am happy to serve you and give you the following answers: The reasons why China Telecom's traffic exceeds 2G charges: 1. Because the traffic used by users exceeds the 2G specified in **, additional fees need to be charged.

2. Since the traffic used by the user exceeds the 2G specified in **, additional fees need to be charged. Solution: 1. Users can choose to upgrade** to get more traffic.

1. Log in to the official website of China Telecom, check the available traffic**, and select the right one**. 2. Buy a traffic package or data card to get more traffic. 3. Log in to the official website of China Telecom to check the traffic usage so that you can purchase the traffic package or data card in time.

Personal tips: 1. Try to choose the right traffic** to avoid exceeding the traffic. 2. Check the traffic usage regularly so that you can purchase the traffic package or traffic card in time.

3. Try to avoid using more than the specified flow rate to avoid additional costs.