How to clean a chair with a carved pattern

How to clean chairs with carved patterns:

1. Regularly maintain the furniture, especially the carved parts of the furniture.

2. The carved parts are easy to be damaged, so you can gently and patiently wipe them with a soft small brush or cotton cloth along the wood grain.

3. For those carvings that use round carving, hollow carving, and openwork carving, do not use towels and wet cloths, because the wool on the towel is easy to hook and hang in these delicate flower holes. This will not only affect the beauty of the carving, but also easily damage the carving, which may cause scratches. For this kind of carved pattern, you should use a small soft and moderate brush, reach into the carved flower hole, gently wipe back and forth, and then use a cleaning gun to blow on the carved place and flower hole until it is blown clean.

4. For furniture that is particularly dusty and the furniture is not good for long-term humidity, if it is difficult to clean, it is best to ask a special cleaner to maintain it.

Hello! Leather clothes are generally not washable, so it is recommended that you take them to a professional laundry for care to better protect the fibers of the clothes.

Washing method of washable PU skin:

1. Use a clean semi-wet cotton cloth or towel to dip Blue Moon hand washing detergent, and then directly scrub the laundry detergent on the surface of the PU leather clothing;

2. After the stains are scrubbed, use a clean towel dipped in water to wipe the area with laundry detergent; After washing, put it in a ventilated place to dry;

3. Note: Leather clothes should be cleaned in strict accordance with the label instructions, using special detergents, and the clothes must be hung in a ventilated place to dry after cleaning, and then coated with a layer of leather care agent before storage to prevent mildew and insect moth.

Don't get water yet, apply it with dish soap and rub it evenly, wait a minute or two before rubbing, and then wash it with water.

Because it is an old bracelet and it is heavily contaminated, it needs to be cleaned with caution.

The cleaning method is as follows:

1. Take a small basin, pour an appropriate amount of warm water into the small basin, and then put the jade bracelet into the small basin for the first soaking, about 30 minutes, to remove the oil slick on the surface.

2. Add an appropriate amount of jewelry cleaning agent to a small basin, soak the jade bracelet in a bowl for the second time, and take it out after about 30 minutes.

3. Take out the jade bracelet and gently scrub it with a soft brush.

4. Rinse the jade bracelet in a small stream of water.

5. Put the cleaned jade bracelet on a soft and clean cotton cloth and gently wipe it with a cotton cloth.

Hello, yellowing of clothes is a color stain problem, which is difficult to remove with conventional detergents, and the treatment methods of different materials and colors are different, which requires skills.

Here's how to remove yellow stains from clothes:

1. Use Blue Moon Bright White Brightening Laundry Detergent for regular machine washing or hand washing.

For example, the yellowing of clothing does not improve.

2. "Color stain soaking method" soaking.

Colored clothes: Pour a small amount of water (about liters) into the basin, measure the color stains of colored clothes (600g specification) bottle caps with blue moonshine colored clothes (600g specifications), add them to the water, and stir well. Soak in clothes overnight and rinse well.

The amount of water should be so that the clothes are just wet, and the net amount of colored clothes and collars should be increased or decreased accordingly according to the amount of water. If the stain is still not removed after soaking overnight, you can continue to soak for an extended time.

Precautions: Colored clothes are not suitable for fading clothes and dry cleaning, avoid touching metal buttons, zippers, metal ornaments, etc. on the clothes when using, and avoid direct sunlight.

The engraving machine manufacturer will teach you how to clean the guide rail of the engraving machine (it is recommended to clean it every half a month and shut it down for operation).

As one of the core components of the equipment, the guide rail and linear axis play the role of guidance and support. In order to ensure that the machine has high machining accuracy, its guide rails and straight lines are required to have high guiding accuracy and good motion stability. In the process of operation of the equipment, due to the processing of the processed parts will produce a large amount of corrosive dust and smoke, the smoke and dust will be deposited on the surface of the guide rail and the linear axis for a long time, which has a great impact on the processing accuracy of the engraving machine equipment, and will form an etching point on the surface of the linear axis of the guide rail, shortening the service life of the equipment.

In order to make the machine work normally and stably and ensure the processing quality of the product, it is necessary to do a good job in the daily maintenance of the guide rail and linear axis.

Note: Please prepare to clean the guide rails - dry cotton cloth, lubricating oil.

The guide rail of the engraving machine is divided into linear guide rail and roller guide rail, and in the YM series, the linear guide rail is used in the X direction and the roller guide rail is used in the Y direction.

Cleaning of the guide rail of the laser engraving machine: first move the laser head to the far right (or left), find the linear guide rail as shown in the figure above, wipe it with a dry cotton cloth until it is bright and dust-free, add a little lubricating oil (sewing machine oil can be used, do not use engine oil), and slowly push the laser head of the laser engraving machine left and right several times to evenly distribute the lubricating oil.

Cleaning of the roller guide rail of the engraving machine: move the beam to the inside, open the end covers on both sides of the machine, find the guide rail as shown in the figure above, wipe the contact between the guide rail on both sides and the roller with a dry cotton cloth, and then move the beam to clean the remaining places.

The wood itself is patterned. That pattern is the pattern of wood. After the chair is seated, scrape the putty, then sandpaper it, find the trachoma, then polish it with fine sandpaper, and finally spray paint, and it's good.