Do all trucks have to be equipped with tail reflectors?

As of August 2019, all trucks are required to be fitted with tail reflectors.

According to the "Motor Vehicle Safety Technical Inspection Items and Methods":

Reflective logos on the body.

Special operation vehicles for trucks and truck chassis modifications.

and trailer rear body reflective logo pasting requirements and material type (reflective film type or reflector type) should comply with the provisions of GB 7258, reflector type body reflective logo fixing should be reliable.

All trucks (semi-trailer tractors.

Except), special operation vehicles and trailers modified from truck chassis, and the body reflective logo pasted on the side shall comply with the provisions of GB 7258.

Paste the installed body reflective logo should be printed with the 3C logo in accordance with the regulations.

This is not necessarily, but the body (including the tail) reflective sticker is a must, otherwise it will be taken by the traffic police to generally 200 yuan, and it may even deduct points!

1, the tail of the truck should be installed reflector, in January 2012 the implementation of GB25990-2010 "vehicle tail sign board", the truck according to the requirements of the paste reflective strip has been clearly stipulated. Trucks with a total mass of more than 12 tons and trailers with a length of more than 8 meters should be set up with vehicle tail signs that meet national standards, and the vehicle tail reflective signs should be forcibly pasted. The vehicle management department that does not paste the tail reflective logo is not given a license, and the annual inspection is unqualified, and it cannot be driven on the road.

2. High-quality reflectors can allow drivers to maximize the visibility of vehicles and increase the safety distance between vehicles, so as to prevent or reduce major traffic accidents caused by vehicle rear-end collisions at night or under low visibility conditions.

3. Choose the right reflector. Heavy-duty vehicle tail sign board (twill) is mainly used for the tail of trucks, dump trucks, etc. It is composed of alternating bands of red fluorescent material and yellow reflective material, and is a rectangular sign board.

It is 565mm long and 30mm wide. A set of sign plates consists of two sign plates with retroreflective and fluorescent materials. The tail sign board of long vehicles is mainly used for the rear of long vehicles and semi-trailers.

The border is made of red fluorescent material, and the center is made of yellow retroreflective material, and the shape is a rectangular sign board. It is 565mm long and 195mm wide. The thickness of the aluminium plate is that a set of sign plates consists of two sign plates with retroreflective and fluorescent materials.

As of August 2019, all trucks are required to be fitted with tail reflectors.

According to the "Motor Vehicle Safety Technical Inspection Items and Methods":

Reflective logos on the body.

The pasting requirements and material type (reflective film type or reflector type) of the rear body reflective logo of the special operation vehicle and trailer modified by the truck chassis shall comply with the provisions of GB 7258, and the reflector-type body reflective logo shall be fixed reliably.

All trucks (except semi-trailer tractors), special operation vehicles and trailers modified from truck chassis, and the body reflective and rotten logo pasted on the side shall comply with the provisions of GB 7258.

Paste the installed body reflective logo should be printed with the 3C logo in accordance with the regulations.