win7 mistakenly deleted the broadband, the new broadband connection can not be used, the local conne

How to create: Step 1: Click Start - Control Panel - Network and Sharing Center, and click "Set up a new network or connection" below.

Step 2: Click on the option to select "Connect to the Internet".

Step 3: Click on "Broadband (PPPoE)(R)".

Step 4: Enter your broadband account number and password in Username & Password, and tick the box before "Remember this password".

Step 5: Go back to the "Network and Sharing Center" when you started the setup and click "Change Adapter Settings" on the left.

Step 6: Right-click on the created "Broadband Connection" and select "Create Shortcut", at this time, it will prompt that the shortcut cannot be created in the current location, do you want to put the shortcut on the desktop? The dot is.

The desktop creates a shortcut to a broadband connection. Cite.

What kind of cat are you using, if it is the kind of large-scale hub, you need to register the router, if it is a single dial-up Internet access, you need to ask your network ** provider, in addition, your local link does not have a valid IP, you only need to restart the router, and the local connection settings will automatically obtain the IP. Hope.

There are a lot of tutorials on the Internet, so let's search for them.

win7 system broadband connection is missing how to build,I believe this is a problem that many users have encountered,Due to some misoperation or accidentally deleted their broadband connection,Open the computer can not find a broadband connection,Naturally unable to access the Internet,People are anxious,How to solve such a situation for you? The following will teach you how to recreate a broadband connection in the win7 system.

How it works:

1.First of all, right-click the "Network" icon on the Win7 desktop, select "Properties", and open the "Network and Sharing Center;

2.Then find Set up a new connection or network, select "Connect to Internet" in the pop-up new window, and click "Next";

3.Click on the default option "Broadband (PPPoE)(R)" in the window, as shown in the image below

4.Enter the "username" and "password" provided to you by the telecom company when you apply for broadband, and the name of the socks is "broadband connection" by default, and then click "connect";

5.If the password is correct, you can now access the Internet.

About how to create a broadband connection in the win7 system Daqing system to share with you here,The operation is very simple,I believe everyone can learn,You don't have to worry about finding a broadband connection in the future!

Do you not have an icon for your online neighbors, or do you not have a broadband connection?

The online neighbor icon appears:

Right-click Desktop - Properties - Desktop - Customize Desktop - Neighbor with a check mark or find Neighbor in the Control Panel.

You can create a new connection in the Internet option, enter your home broadband account password, it's very simple, and it will be automatically connected later.

Create a broadband connection, which the online neighbors have in the beginning.

As long as the NIC driver is OK and not "disabled", it doesn't matter if the local connection is restricted or there is a connection, it's just some settings for the local area network, and it has nothing to do with the broadband connection.

Error "678" means that the modem and the local modem are not synchronized. First of all, please check whether the link light on the modem indicates that the connection is on. If it does not light up or flash, it means that there is a problem with the ** cable between the junction box and the modem, or the network cable connection between the modem and the computer.

You can reseat the line so that the link light is always on as normal. If the link light display is normal, generally restart the computer and modem to solve the problem. If none of the above methods can solve the problem, there may be a problem with the port of the local office.

678 is because your network cable is not plugged in properly, just try again.

The "Error 711: Cannot Load Remote Access Service Connection Manager" error message appears when you create a network connection.

Cause This issue can occur if the following services are disabled: 6 1 **Service.

6 1 Remote Access Connection Manager.

6 1 Remote Access Auto-Connect Manager.

Solution. To resolve this issue, enable these disabled services and then start them: 1Click Start, right-click My Computer, and then click Manage.

2.Double-click Services and Applications, and then double-click Services.

3.Right-click Services, and then click Properties.

4.On the General tab, click Manual next to Startup Type.

5.On the General tab, click Start under Service Status, and then click OK.

6.Repeat steps 3 through 5 for the Remote Access Connection Manager and Remote Access Auto-Connection Manager, respectively.

There is an internet option in the browser tool. In the Connections panel, select your default connection. Point settings. The pop-up box has a password next to it, and there is a premium. There is one that disconnects when not using the network.

First of all, everything is fine with your computer, don't worry.

Regarding the IP address of the local connection: the so-called local connection is the network card that is plugged into the network cable on the computer, and usually a network card needs at least one IP address to realize data exchange. This IP address can be specified, or it can be "automatically obtained", the latter requires you to have a DHCP service on the local network you are connected to, and common routers have this DHCP function, which can allow the local connection to obtain the IP address correctly.

A broadband connection is a "virtual" interface, which has a separate IP address, but the traffic has to go through the network card, just like your computer has two network interfaces, one is a local connection, and the other is a "broadband connection", which of course corresponds to two IP addresses. In this case, the IP address of the local connection is meaningless.

It should be that the router has not been debugged well, it is recommended that you find someone who understands the network to help you debug it in person, and answer your hardware doubts.

1) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.

2) If it's a problem with the router, if it can be used originally, it can't be used for the time being, my own practice is to disconnect the power of the router and plug it in, and I'll take a look. After there is a factory reset, it can be used from the new settings (this is under the premise that the physical mountain Luzi connection is correct, sometimes it is caused by the router finding IP address slow or failed, not that the router is broken).

If it can't be solved all the time, it is recommended to call the customer service of the router**, they have **** guidance, I encounter a problem that I can't solve by myself, it is very useful to consult them for advice on the way to the min, and they will give the correct advice for your settings or operations.

3) If you turn off the wireless switch, turn it on, if it is a wireless connection with software, it is normal for the software to be difficult to use and often have problems, there is no better way, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.

4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.