What motherboard does the P4 506 come with for better overclocking? About 600 yuan.

Generally speaking, Intel's CPU reserves 20% of the room for performance improvement, which is mainly for CPU security considerations!

Generally speaking, overclocking is to exceed these tens of percent, but there is still a certain risk of overclocking

Based on the Prescott core, the Pentium 4 506 is a replacement for the same frequency Pentium 4 505, which uses a new generation of LGA 775 interface and is manufactured using a 90nm process, with a L2 cache of up to 1MB for a significant performance boost. The important thing is that the processor has added EM64T technology support, so that it has 64-bit processing power, which can be regarded as keeping up with the development trend of processors. In addition, compared to the Pentium 4 505, the SSE3 instruction set and Intel Disable Bit antivirus are also added, but unfortunately the hyper-threading technology has been removed.

What really concerns the DIYERS is that although the processor uses the same core as the high-end Pentium 4 541 and other new generation 5x1 series, the front-side bus frequency is only 533MHz, that is, the external frequency is 133MHz, which is at the same level as the Celeron D, so it has a lot of potential to be tapped, according to many tests, with the appropriate motherboard and slightly better air-cooled cooler, the front-side bus can be easily increased to 800MHz. At this time, the frequency will reach the level of 4GHz, which is higher than the frequency of any Pentium 4 processor on the market, and the performance is not comparable to the overclocked Athlon64 3000+, which can be described as the king of the overclocking processor market.

In terms of **, the boxed Pentium 4 506 is currently only 860 yuan, which can be described as the lowest Pentium 4 processor on the market. And the smart thing is that compared with the 480 price of Sempron 2500+ and the 1200 yuan price of Athlon64 3000+, the ** of 860 yuan is just in the middle; For users who want to choose SEPRON 2500+, only 340 yuan is needed to improve the performance by a large margin; For users who want to choose Athlon64 3000+, they can save 340 yuan, but the performance is still significantly improved, and the 340 yuan saved is used to buy a 512M memory or a higher-grade graphics card, which brings more advantages to the performance improvement. It can be seen that the launch of this processor is indeed Intel's handiwork.

Check it out. Good words ** points.

It's best not to overclock the CPU of Inter.

And no one has tested which wrench has good overclocking performance.

And the Inter manufacturer has never promised how much more its CPU can be.

Or how good the overclocking performance is.

945 is recommended, and there are also about 700. There is a lot of room for upgrades in the future. If it's a 915, there's basically no room for upgrading.

If you want to upgrade, the basic full set is scrapped, and the memory of DDR cannot be used on 945 or later products, although 915 also supports DDR2 memory, but the motherboard** is even higher than 945. The 945 can support P4, CD and the latest Pentium D processor, and the overall performance and scalability are definitely not comparable to the 915, and the 915 is only a transitional product.

915 is on the line 945 overall ** is high to DDR2 memory Serial port 2 hard disk Generally play 915 is enough Gigabyte's motherboard is good I use Gigabyte's.

For now. The 915 is mature.

**Plausible. The 945 is not cost-effective.

This CPU is an interface, the most suitable motherboard chip should be 915 series, I recommend using elite 915P, support dual-channel, HD standard sound card, and is a three-year warranty, my friend installed this board and this CPU

Gigabyte, ASUS. If you have money, you will buy a big factory.

If you have money, you can buy a first-line motherboard with a good reputation, and if you don't have money, you can buy a second-line motherboard, the quality is good, and the service is pulled.

There's no big area to lift the liquid.,As long as it's supported.,945It's mainly a battle for dual-core CPUs.,Mine is also a positive posture P4 506.,The book with the album is the PTM800 board.

Either use 945pl, or don't use the new 865, go and hold the 775!

No, but the upgrade will have to be replaced in the future, and both major pieces will be replaced.

MSI's is about 600-900, I remember it's a 915 wrench.

I only recommend one for you, the Elite 915p

About 680 is more cost-effective!

I'm using it! Very good!

ASUS's motherboard is the best, you look for 800 yuan with a very good one, LGA775 interface.

Equipped with a 915 motherboard **Between 800-1500 It depends on what motherboard.

Rainbow is so rubbish.

Shuoqing SK-915PL-SL

Buy the colorful ones! The workmanship is ok!

Don't buy Shuangmin's! Two of my classmate's dual-sensitive graphics cards have been broken!

I'm paired with ASUS P5GL-MX, which is not bad, and the board is now about 690-720.

If you don't want to waste money, don't buy a colorful motherboard. Its graphics card is okay.

Shuangmin's bar, this one is not bad, a big manufacturer.

p4 506? Cheaper, 945gz, less than 300, better, g31, in the early 400s, is enough.

At present, you can only buy 865 or 945 915 discontinued pull, I don't know if it was the answer 2 years ago, but your CPU is indeed more than enough.

G31 P31 P35 Now it's a relatively good board Of course, I recommend you to be P35 **5 6 Baikuai.