The computer automatically restarts the master to enter the emergency 20

1.Check whether the CPU frequency is adjusted too high (boot into the CMOS settings, I don't need to say it).

2.Right-click on my computer, click"attributes", or in the Control Panel"system", and then there's"Boot and failback"of the settings, put"Automatic restart"of"√"Remove.

The power supply voltage is insufficient. If the local voltage is not enough, it is recommended to purchase a UPS regulated power supply. About 300-500 for the home.

It's also possible that you're overclocking. Reduce the frequency appropriately.

Estimate that there is a problem with your power supply. Or the voltage in your area is unstable.

Voltage issues? Is the temperature of the CPU too high? Let's see, is the temperature of U too high!

Prepare the contents of the C drive. It can be reinstalled directly.

You may want to reinstall the system and see what is wrong with it in the control panel!

Summary of the reasons for the automatic restart of the computer software - -

1 Viruses. When the "Shockwave" virus occurs, it will also indicate that the system will automatically activate after 60 seconds.

The Trojan takes control of everything on your computer from a remote control, including getting your computer back up. It is recommended to use high-quality antivirus software such as Kingsoft Antivirus (free) and Kaba (paid) to disinfect your computer.

2 System file corruption.

The system files are corrupted, such as the fonts under Win2K, the fonts under the Win98 Fonts directory and other basic files during the system runtime are corrupted, and the system will be forced to restart because it cannot complete the initialization when it starts.

Workaround: Overwrite install or reinstall.

3 Timing software or scheduled task software works.

If you set up in the Schedule Taskbar to restart or load certain workers, the computer will start up again when the scheduled time comes. In this case, we can open the "startup" item, check whether there are any executable files or other scheduled workers that we are not familiar with, block them and then boot them to check. Of course, we can also directly enter the "msconfig" command in "Run" to select the startup item.

Reinstalling the system may be your system with fewer files.

There are many reasons why your computer may automatically restart.

Divide software problems and hardware problems to deal with.

In terms of software, it is best to reinstall the system and try to restore the BIOS to its factory value. It is also possible to dispose of the discharge.

If it's not a system problem, it's a hardware problem. There are a variety of possibilities in the middle, generally to see the memory module, whether the contact is poor, wipe the memory stick gold finger, wipe it a few more times to try, or change a good memory module to try.

Secondly, it may be a power supply problem with the host, there is no other way, try another one.

There may also be a problem with the CPU fan, which did not clean up the dust in time, or the heat dissipation was not good, resulting in automatic protection of the motherboard after overheating.

Others may have problems with the graphics card or motherboard. There are many reasons for this, and the only way to eliminate them is to do so one by one.