Montblanc watch time is too fast, what is the reason, how to repair

Five common reasons for watch time error and watch time inaccuracy:

1) Insufficient power reserve: You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is very small, it may also cause insufficient power reserve, you can replenish the power by manual winding, and then observe whether it continues to have the phenomenon of fast and slow.

2) Insufficient power: If the quartz watch suddenly finds that it is slow, it is likely to be caused by insufficient battery energy, and you can send the watch to a special maintenance point to check the power.

3) Hit or hit: The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause the problem of running time. This is to be dealt with in a timely manner.

4) Need to maintain: The lack of oil in the movement or the wear and aging of internal parts may cause time problems, which need to be maintained, and need to be sent to the designated maintenance point for maintenance services.

5) In addition to the above common situations, the watch is affected by some ambient temperatures: if the hairspring of the watch is magnetized, the watch will not be accurate.

Click here to contact the Montblanc Watch After-Sales Service Center.

Let's talk about how to solve the phenomenon of the watch becoming faster after Montblanc After-sales?

1. First of all, we must know that there is no difference in the watch, there are always some errors, generally speaking, it is normal for the error not to exceed 30 seconds per day, if it is beyond this range, you can adjust the time by yourself, and if it is not good, you can get the after-sales repair center of Blancpain Watch to deal with it, so as not to cause damage to the watch caused by incorrect operation.

2. For the phenomenon of Montblanc watches going fast, we can first degauss the watch, if it is not caused by magnetism, we will check other faults one by one, such as the phenomenon of lapping the hairspring, and then use relevant instruments to detect.

3. Montblanc watches appear fast and we must turn the time back, now the watch basically has waterproof measures, such as the crown position will have a waterproof lock, you need to twist the crown counterclockwise when adjusting the time, when the crown pops out, it is unlocked, at this time the crown is processed 0 gear, which can be used to manually wind up; Pull it out to adjust the day of the week, down to adjust the calendar, and then pull it to the second gear, which is used to adjust the time. When the time is adjusted, be sure to push the crown back and then screw the waterproof lock to prevent water from entering the watch.

The speed of a fully automatic mechanical watch is mainly determined by the pendulum frequency, usually the larger the pendulum, the smaller the pendulum frequency, and the smaller the pendulum, the greater the pendulum frequency. Generally, watches rely on the retraction and release of the hairspring to control the swing, which is the basic principle of adjusting the speed and slowness. If the hairspring is longer, the swing will increase, the frequency will be smaller, and the watch will be slower; Conversely, the more the pendulum frequency increases, the faster the watch will be.

2. The structure of the problem. Due to the gravitational pull of the earth, the offset between the horizontal position and the vertical position will produce a displacement, and the mainspring will be unbalanced from the top to the loose, and the torque will be unbalanced, and it will be affected by the external temperature, magnetic field, vibration, etc.

3. Magnetic field utility. After the hairspring is magnetized, the loops between the loops are only visible when worn, and there are sticky or brief loops, especially on the façade, the hairspring will hang down due to its own gravity, and the shaking of the arm will intensify its radial movement, resulting in a change in time.

4. The balance of the balance wheel and the balance spring, especially the balance wheel. The balance wheel is very poorly balanced, which will cause the balance wheel to change the precision of the surface at a certain swing.

Hello, there are many reasons why the watch can slow down, such as lack of power, lack of regular time maintenance, damage to internal parts caused by impact, etc. In this case, we recommend that you try to send the watch to the relevant after-sales service center as soon as possible to deal with it, or click on my homepage to inquire and understand. Let a professional technician handle it for you, so that you can avoid unnecessary troubles caused by improper operation in your own processing.

Welcome to consult.

If your watch is not out of warranty, it is recommended that you take it to a specialty store or after-sales service to repair it. If your watch is out of warranty, you can also choose some professional and regular watch repair shops to repair it.

How much faster? The national regulations for mechanical watches are within plus or minus 30 seconds, and the daily error is within the normal range.

30 seconds a day, 1 minute error for two days.

10 days 5 minutes.

About 15 minutes a month.

That's it for mechanical watches. If you want to be accurate, don't buy a mechanical watch. Buy a quartz watch or use a mobile phone.

If it is not the case above.

Take it and send it for repair.

Montblanc Time Fast After-sales Service is located in Room 918, 9th Floor, Landmark Plaza, Nanjing East Road Pedestrian Street, Huangpu District, Shanghai, and no Montblanc watch can be worn during activities such as hot baths or saunas. This is because the waterproof rubber ring will be affected by temperature, thermal expansion and contraction will appear voids, and accelerate aging, which will cause water ingress and water condensate in the surface, which will seriously lead to damage to the parts.

1. Anti-magnetic demagnetization.

The metal material of the watch is very easy to be magnetized and cause the watch to malfunction, so try to avoid placing the watch next to magnetic objects, such as mobile phones, computers, magnets, metal buckles of bags, car door handles, automatic mahjong machines, etc. Once the watch is magnetized, it will cause inaccurate time, it is recommended that you send the watch to a professional luxury repair and maintenance center for demagnetization as soon as possible.

2. Prevent collisions.

No matter how good the quality of the watch is, it is composed of a sophisticated movement, and a collision can easily cause mechanical damage and scratches on the appearance of the watch. It is recommended that when you wear a watch, you must try to avoid the watch being collided, and if the watch is damaged by the collision, it must be sent to a professional luxury maintenance center for professional repair and maintenance in time.

Possible reasons for the rapid walking of mechanical watches:1The oscillator is bumped, causing the watch to go faster; 2.

The hairspring rubs against the fast and slow clamp or the outer pile, causing the watch to malfunction and the watch to go fast; 3.Wearing a mechanical watch has been subjected to a violent impact or excessive exercise, resulting in the failure of the mechanical watch; 4.The watch is magnetized when it comes into contact with a strong magnetic field such as a computer or refrigerator; 5.

Improper maintenance caused the watch movement to lose oil, which accelerated the wear and tear of the shaft. If it is magnetized, it should be demagnetized; If there is wear and tear on the internal parts, replace the parts; If there is a shortage of oil in it, it is necessary to refuel.

Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can be parked, but there are several main reasons.

1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.

2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.

3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.

There will be after-sales ** on your warranty link, call after-sales ** to inquire about the after-sales address.

1. The watch handle pulls out the first gear to adjust the day and date, and pulls out the second gear to adjust the time. First of all, at 24 o'clock, the watch hand is in the second half of the circle, and the time is between 10 and 2 o'clock in the evening, do not adjust the date directly, which may damage the date transmission gear. Set the time to 10-2 p.m. first.

2, and then start to dial the knob to adjust the date, for example, today is the 26th, you have to adjust the date to the 25th. Then dial it outwards and adjust the hands so that the date jumps to the 26th. Then adjust to the correct time.

If it is in the morning, it is less than one turn of the clock hand, if it is in the afternoon, it is necessary to turn more than 1 circle, so that the hand at 24 o'clock is more than half) must pay attention to 24 o'clock to match the real time.

The Montblanc Timewalker elegantly walks in understated luxury, dynamic without being ostentatious, which is both the zeitgeist of the Timewalker and the outstanding design style of the collection: the clean, sleek architectural shape of the polished stainless steel is dynamic and masculine, and the large 42 mm diameter case is paired with a slightly serious black or silver dial.

On the dial, there are five large Arabic numerals contrasting with the delicate seconds hand, and the design is quite simple, abandoning the pretentious pretense. The strap is available with a sporty stainless steel bracelet or an elegant black calfskin strap. The simple yet elegant design is complemented by an automatic mechanical movement inspired by Montblanc's watchmaking excellence, demonstrating Montblanc's dedication to quality.

1. Insufficient power reserve. You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is very small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of speed and slowness, if it is still recommended to go to the special repair shop for testing. 2. The power is insufficient.

If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy, and send the remaining watch to a special maintenance point to check the power or replace the battery. 3. Having been beaten or impacted. The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause time problems, so it is recommended to go to a special repair shop for testing.

4. Maintenance is required. The lack of oil in the movement or the wear and tear of the internal rock parts may cause time problems, which need to be maintained and sent to a designated repair point for maintenance services. 5. Under the influence of ambient temperature, the coarse socks watch is magnetized

If the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the time error. Sending the watch to a designated repair point for professional inspection and adjustment can restore the watch to the normal error range.

Summary. 1.The watch handle is pulled out of the second gear, which is to adjust the time.

2.Do not adjust the time and its watch functions between 23:00 and 5:00 in the morning, so as not to damage the Montblanc watch mechanism.

3.The watch handle is wound up when it is not unplugged, and it is recommended to wind about 30 times for new Breguet watches or long-standing watches, so as to reserve some power for the watch, so as to avoid pauses or inaccurate timing caused by insufficient activity.

4.The watch handle is pulled out of a gear, is to adjust the date, 1-31 days, if there is only 30 days of the month, you have to manually adjust the 31st. (Note that the calendar is adjusted at 12 o'clock in the evening, if the calendar is adjusted during the day, you can manually rotate the time by 12 hours).

How to adjust the date on a Montblanc watch.

Hello. How to fill in the date in Montblanc Time.

Do you have a five-needle or a three-needle one.

Its debugging method is different.

You should have three stitches.

1.The watch handle is pulled out of the second gear, which is to adjust the time. 2.

Do not adjust the time and its watch functions between 23:00 and 5:00 in the morning, so as not to damage the Montblanc watch mechanism.

3.The watch handle is wound up when it is not unplugged, and it is recommended to wind about 30 times for new Breguet watches or long-standing watches, so as to reserve some power for the watch, so as to avoid pauses or inaccurate timing caused by insufficient activity. 4.

The watch handle is pulled out of a gear, is to adjust the date, 1-31 days, if there is only 30 days of the month, you have to manually adjust the 31st. (Note that the calendar is adjusted at 12 o'clock in the evening, if the calendar is adjusted during the day, you can manually rotate the time by 12 hours).

How to adjust your Montblanc watch.

waterproof, and power reserve.

1. How about mechanical watches.

Adjustment: 1. The handle in the middle is screwed like a screw, according to the version of the counter waterproof design, when adjusting the time, it is twisted downwards counterclockwise, and it is loosened like a teacup lid.

2. After unscrewing, it is screwed directly upwards at 0 gear, and it is manually wound. (If you buy a new watch or have not worn it for a long time, please manually wind it for 30 turns when you wear it again, so as to ensure the energy of the watch, which is usually not needed).

3. Pull it lightly, it is 1 gear to twist up to adjust the week, and down to adjust the calendar.

4. When pulling it, it is 2 gears that can adjust the time.

Second, how to adjust the quartz watch:

For a calendar watch, when the seconds run to 12 o'clock, the stem is pulled out and rotated clockwise to adjust the time. If there are no seconds, you can adjust the minute hand to the first two minutes of the time you want to adjust the time, and then push it back to the shank after adjusting the time.

For watches with a calendar, pull out the handle a little bit, you can adjust the day of the week clockwise, adjust the date counterclockwise, and pull the handle to the outermost point to adjust the time, the specific operation is the same as that of a watch without a calendar.