Why do I have to press F2 when my motherboard is turned on?

The system is different, you can change it, it is recommended to use the system, I am using this, it is very easy to use, soon!!

Generally speaking, the boot will automatically detect some things set in your BIOS, just cancel the detection, the specific method:

1.Turn on the computer and click del to enter the settings.

2.Select the first option, Standard CMOS Features, press Enter3There's a halt on option below, change it to no errors, enter 4Press F10, click Y Enter and you're OK.

Give it a try, absolutely doable.

Keep pressing when starting"del"Key.

Go to coms and turn off this option, it won't be, remember to press F10 after closing and press Y to save and restart!!

If it doesn't work, the motherboard's battery is out of power, so replace the battery!

1.Turn on the computer and click del to enter the settings.

2.Select the first option, Standard CMOS Features, press Enter3There's a halt on option below, change it to no errors, enter 4Press F10, click Y Enter and you're OK.

CMOS, set the floppy drive in the first item, and turn it off.

1. Press F2 when booting up, which means that when the computer is turned on, press F2 to Continue, Del to enter setup, that is, press F2 to continue, and press the Del key to enter the setting interface.

2. (Some motherboards may prompt press the F1 key to continue) Its solution needs to prepare tools, a flathead screwdriver, a keyboard (if the keyboard is unresponsive, it is recommended to use a keyboard with a PS2 interface for operation), and a new CR2032 coin cell battery.

3. Press F2 when you boot up, first of all, it may be that the computer is not installed with a floppy drive or the floppy drive is faulty, but there is a floppy drive in the BIOS, which will cause F2 prompt.

4. After entering the BIOS, please select the first item "Standard CMOS Features".

5. Set "Drive A" to "None" and "Floppy 3 Mode Support" to "Disable".

6. Return to the main BIOS settings interface, select the "Advanced BIOS Features" setting item, and press the Enter key to enter.

7. Set "Boot Up FloppySeek" to "Disabled".

8. Press F10 to save, exit the BIOS setting with ESC key, and restart the computer.

Solution: Replace the motherboard battery, another way to judge that the motherboard battery is out of power is to enter the system to see if the system time is consistent with the real time, if it does not match, the motherboard battery is generally dead, so the battery must be replaced.

There are several questions about the floppy drive, and there are several solutions, as follows:

Reboot the system, go to the BIOS settings, if you find that the floppy drive is set, but there is no floppy drive, you need to replace the IDE secondary master auto with none.

After the computer is turned on, press del to enter the motherboard BIOS, enter the boot startup item to set the boot boot sequence, and turn off the floppy drive to boot.

Start the computer, press the DEL key to enter the main interface of the motherboard BIOS settings, select the "Advanced BIOS Features" setting item to enter, and then set the "Boot Up Floppy Seek" to "disabled", and then you can turn off the boot software detection function.

Have you ever encountered the phenomenon of pressing f1 or f2 when the computer is turned on, and you have solved such a problem in this way. Today we're going to teach you how to turn off this pesky F1 key.

The BIOS is not set up properly and the initial settings are restored, it may be that your motherboard battery is dead, and it is OK to change the battery and reset it.

You should have the motherboard BIOS system that set the A disk floppy disk as the first boot item, but there is nothing on the A disk, so the reading error. So you press F1 to go into the BIOS system and set it up. Set the CD-ROM or HDD to Frist.

It's solved.

The motherboard BIOS is not set up, please set it according to your motherboard BIOS chip manufacturer.

Press F1 to enter,Set the A disk to none,Save and exit,Try if this problem still occurs,If it's still the same,That's the coin cell battery of that BIOS on your motherboard is dead.,Change it.。

This problem should be your BIOS set up boot detection A disk, you see if this project has not been successfully set, if it is successfully set, the floppy disk drive should not appear after entering the system.

And if it's convenient, can you tell me about your motherboard model? I'll help you find the BIOS settings and take a look.

Boot press F2 should be not set in the BIOS, go in and take a look.

Play the game card, if your computer hardware performance is okay, then it should be that the driver is not installed. Reinstall the chipset and graphics card with the driver life.

This is the hard disk is not detected, generally encountered such a phenomenon, from four aspects to deal with: The first reason: if it is the hard disk data cable and the hard disk power cord poor contact caused by this phenomenon, you can do this:

Shut down the computer, open the case, and plug the data cable of the hard disk and the power cable of the hard disk back in

F1 is to enter the BIOS settings, and the initial settings and time will be automatically restored when the battery is dead, so you have to press F2 to go down, and it is OK to change the battery and reset it.

Go to the BIOS settings and restore the initial settings, it may be that your motherboard battery is dead, and it is OK to change the battery and reset it.

Let's change the settings of the motherboard.

It should be changed to setup in the advance term

Replace the motherboard battery with one and turn it on again.

In this case you have a motherboard setup error, pressing F2 is to ignore the error and turn it on, please do the following:

Boot up and press del to enter the BIOS, find the option of load optimized defaults on the right side of the BIOS interface, this is the default setting for loading BIOS, in which the mouse is not used, press the up, down, left and right arrows of the keyboard, select and press enter, and then press F10 to save and exit.

If the problem doesn't work, open the case and find the motherboard battery (something like a one-dollar coin) on the motherboard and replace the battery.

The motherboard battery is dead, and it's OK to replace the battery.

I still don't understand how to solve it, you said a lot.

There is a coin cell battery on the motherboard that is dead, which causes the boss settings to not be saved, so press F2 to boot it every time it is turned on. Replacing the battery on the motherboard will do the trick. Up to 20 pcs per battery.

Press del before displaying the dot key on the keypad"."

Select the settings, restore the inside to the factory settings, and you're good to go.

The motherboard battery is dead, just replace the battery.

The motherboard battery is dead, just change it to a CMOS battery.