Wild Emperor. How to disassemble and assemble the low beam? Geely Emgrand low beam bulb disassembly

Open the hatch and loosen the 6 bolts in front of you.

Second, loosen the Phillips screws at the wheel arch positions on both sides.

Peel it off forcefully and it will present the state of Figure 1, and you can disassemble the headlight assembly at this step, and you don't need to continue to dismantle the front protection (note, you only need to detach the upper part, and you don't need to remove the whole thing).

Generally speaking, after unplugging the power supply buckle (some models also have dust covers, you can remove it), press and hold the limit release button of the power supply buckle and gently unplug the power supply buckle. At this point, you can see the exposed light bulb. Rotate the base of the bulb counterclockwise, and soon you will hear a crisp "click" to indicate that it is the end, and you can gently take it out.

The way to remove the low beam of the wild emperor is to remove the latch, and then turn off the switch inside, and then you can remove it.

For the method of disassembling the low beam, I think it should be to open the lid of the laser projector inside, and then exchange it for a bulb or something.

Wild Emperor low beam disassembly method, method, he should have a disassembly and assembly manual, and he has to disassemble and assemble it according to his manual.

Disassemble the four screws of the lamp housing, and you can remove the low beam as a whole later.

The method of disassembling the low beam of the field is the method of disassembling the low beam of the field, so that he is removed according to the manual, and the thread is disassembled.

Regarding the disassembly and assembly method of the power lamp you asked, it belongs to special equipment, and it must be disassembled according to his construction design drawings when installing and dismantling, so as to avoid damage to the equipment.

Low beam disassembly method, low beam disassembly method is very simple, he is in a lampshade, and it can be seen when it is stopped, Cai Zhuang.

It's easy, just break off the card slot.

It is relatively easy to install high and low beams on the vehicle, you just need to unscrew the bulb and replace it with a brand new one, and this problem should be solved.

I think that's generally about taking into account his actual situation, so I think it's probably about taking into account the demolition of the four-S store.

The installation method of low beam disassembly is because tonight you can remove all the screws for the money to see, and then look at the installation instructions.

How to install the field low beam and how to disassemble the low beam, you can disassemble and assemble it according to the manual, there are instructions.

Hello friends, low beam and high beam, it's just a switch, not as long as you can step on the high beam, you will make up the low beam low beam high beam is controlled on the switch.

In this case, just disassemble or reinstall the wiring.

The method of disassembling the low beam is also from the outside to the inside.

The characteristic method of low beam can be carried out according to the description of the vehicle purchased. If it doesn't work, you can go to the 4S store.

There should be a way to dismantle this online.

d. How to disassemble and assemble the low beam, you can find a professional to show you.

See the manual for the disassembly and assembly method of the wild emperor golden lamp.

Just now, the methods of Dong Cai Zhuang were put in the magic race to draw the map, and he half of them have an instruction manual, waiting for you to follow the instruction manual. It's no problem to put plates in the dish.

Although you can dismantle our method, you should only go to the 4S shop or go to the vehicle repair place to inspect it and see how it can be picked up.

Performance, low beam disassembly and assembly methods, you can follow the instructions or consult the after-sales manufacturer to know how.

If you are away from the low-beam disassembly method, in fact, you go to ask the customer service, and the customer service will give you a detailed explanation of this method.

It can be disassembled as follows.

2. Unscrew the cover by hand.

3. After that, you can see the headlight mouth clip.

4. Lift the lamp clip up to open the clip.

5. After that, you can take out the low beam.

6. Take out the low beam.

7. Press and hold the lower beam light, pull the bulb upward, and the low beam bulb will be removed.

It can be disassembled as follows.

2. Unscrew the cover by hand.

3. After that, you can see the headlight mouth clip.

4. Lift the lamp clip up to open the clip.

5. After that, you can take out the low beam.

6. Take out the low beam.

7. Press and hold the lower beam light, pull the bulb upward, and the low beam bulb will be removed.

Hello, the low beam is close to the fenders on both sides, this bulb is not easy to change, especially the left one near the battery and the fuse box. First open the cover behind the low beam, pull the plug, and finally take the clip of the bulb. I can only feel it with my hands, and my eyes are not good at seeing the clips.

If you remove the Geely Emgrand low beam bulb, you only need to open the lampshade. Just unscrew the bulb and you're good to go.