N76 white screen after water ingress, boot display mobile phone boot failure, please contact the mo

This kind of machine is not lucky to change the screen to death, because he will ask you for two hundred and five, this.

From the very beginning, my lord didn't use or like foreign brands, what shit Nokia's, Lao Tzu bought a smart phone and used it for half a year, but it was just a fall and over, you say what the fuck is this, I'll fix it, that person or that dog-like thing is more hateful, change a screen and ask me for two hundred and five, when Lao Tzu hasn't changed it, or think about money and want to go crazy, this black people don't even make a price, and what kind of capacitive screen, resistive screen things, Lao Tzu's friend changed a only ninety yuan, and brought a screensaver film, It was that time, I deeply realized that ,,, spend so much money to buy a dead expensive thing, it is better to buy a domestic copycat machine, exactly the same, only 600 yuan, patting the net all over the place, who does not know that the things produced by Chinese factories are bought all over the world, but as soon as they go abroad, they become another brand, Toshiba notebook, Nokia which is not made in China, in fact, the quality of the cottage is not necessarily poor, now my mobile phone is still making, it is a tablet, you can insert a mobile phone card, It's been used for so long, it's not like that, it's cheap six hundred, it's really going to be broken after a year, just buy another one, who in the world doesn't like the new and tired of the old, it's good to use the new one every year, do you spend a few thousand yuan to buy a broken one for a lifetime, then it's better to kill me, Lao Tzu is not a chaste martyr, may I ask if you are,

Doesn't formatting work either?

Soft lattice machine (this is the lattice machine method that S60 machines have).

How to operate: 1) The command operation is to enter *7370 and the original password is 12345.

2) Or go to the settings to do a factory reset, and the password is the same as above.

3) Or you can use software to format it, such as systemtool, etc.

Under normal circumstances, you can press and hold the pen key to enter the safe mode when booting up, so that you can operate under a clean system and avoid the influence of some self-starting software.

In addition, it should be noted that there are some software that boots up and starts the permanent memory, such as Q9 and T9 fonts, if the font library is running, the formatting with this method is invalid, and the corresponding Q9 needs to be closed before the format can be successfully formatted.

2.Hard-mounted machine (this method only tries Symbian 7 phones, such as 6600 7610).

How to operate: When the power is off, press and hold the green dial key * "Numeric key "3" at the same time, then turn on the power (keep these buttons), when the Nokia logo appears a few seconds later, "formatting...... will appearAt this time, release these keys, and the formatting will be completed in about 3 5 minutes, and after restarting, you will enter the system normally.

In this process, only the Nokia phone's Line 2 format was dropped! But it doesn't matter, this feature is not used at the moment. This formatting is more thorough and does not cause invalid formatting.

Unplug the battery and take the memory card off.

Then put on the battery, not on the memory card.

Just turn it back on, and then put the memory card.

If it doesn't work, try again, mine also had such a problem, and then it was fine.

Can you turn on the battery after deducting it? What's so good?

Dude, don't turn it on again if it's in the water, unless you want to change the machine.

The correct process for dealing with a mobile phone falling into the water:

1. Remove from the water;

2. Directly buckle the battery;

3. Disassemble the mobile phone (it can be removed by hand, the back cover, the front cover, unless you are repairing the mobile phone, don't disassemble the eight pieces).

4. Put the mobile phone in a cool and dry place, don't blow it with a blowing machine, you can't grasp it well, and the high-temperature gas blown out is not good for the machine.

5. After making sure that the inside of the machine is dry (about 2 days), install the battery and try to turn it on, and there is generally no big problem with timely processing.

Note that don't turn on the battery when the machine is not cool and dry, that is equivalent to falling into the well water for the second time, and the motherboard will burn.

If you use an authentic original mobile phone battery, or use a commercial battery of a well-known brand such as a reliable domestic Hony battery, you should be able to continue to use it, and there will be no white screen.

The cable is broken, or there is a problem with the phone's system, connect to the computer, and use a PC kit to repair the phone.

Take a blow dryer and blow dry before starting.

Hello: It is recommended that you swipe your phone to solve it.

Re-registered, maybe the operating system crashed.

Factory reset and take a look.

The easiest way is to try the scaler reinstall system. The following is for reference.

1. The situation of white screen is the most common disadvantage, caused by broken screen, cables, IC and motherboard. It depends on what causes the white screen.

2. There is only one way to get into the water: bring your purchase invoice and go to the designated maintenance point for repair. As long as it is fixed, the maintenance cost is regulated, and it will not be messed around.

Don't turn it on, take it to repair, if the motherboard doesn't burn out dozens of dollars is enough, the risky way is to use a hair dryer to dry it, let it go for a day and then turn it on.

Unplug the battery and let it dry for a few days.

Go fix it or buy another one.

What theme did LZ put on, right?

It should be said that flashing can solve the problem!

Go check the nearby customer service, get the invoice warranty or something, and prepare to reinstall.

Go to customer service to solve the estimated flash

I reversed the repair and changed the main version, and got the customer service.

It is estimated that the landlord's screen is broken.

Just wait a while and do it.

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

It may be that some circuit boards are short-circuited, so that some hardware problems, you can choose to clean up yourself with alcohol to wipe the components, but it is not recommended that you do this, 1 is that the general mobile phone is only warranted when disassembled at the repair station, and the warranty will be lost when disassembled by yourself, and there will be no warranty when the seal is damaged in the machine; 2. It may not be possible to get it right after disassembly. So it's better to find a repair station, even if the warranty replacement repair is quite cheap, try not to go to the individual, there may be a replacement for you while you are not being replaced.

The easiest way is to go to the regular store and try it again.

The following is for reference.

1. The situation of white screen is the most common, it is caused by a bad screen, cables, IC and motherboard, depending on what causes the white screen.

2. In the end, the problem can not be solved, only bring your purchase invoice to the designated maintenance point for repair.

This one may be taken out and you didn't get all the water in it. When drying the water, you can use a hair dryer to dry it. If it's broken now, you can only find a professional to see it, and it shouldn't cost too much money!

It works, but I can't see anything clearly.

It may be that the screen motherboard is broken. You can take it to a professional repair shop to get it repaired.

Dizzy... Let's send it to a mobile phone store.。。 Don't press any keys after the phone is flooded.

The board should be forcibly removed as soon as possible. Then blow with a hair dryer. It's good to wait until it's dry.

You can use it again. It only takes two hours for the phone to get moldy when it gets into the water. Hurry up and send it to the mobile phone shop for repair.

There is only one way, take it to others for maintenance, if you can't repair it, you can buy a new one, and if you don't go to the old one, you won't come to the new one!

It is estimated that the cable is broken, and this situation can only be found after-sales.