What is a detuner used for What is a detuner? What does it do?

Updated on technology 2024-04-16
4 answers
  1. Anonymous users2024-02-07

    What is a detuner? What does it do?

    Hello, happy to answer your questions. The detuner is a damping device on the primary side of the voltage transformer to protect the resonance in the power grid. It is essentially a high-capacity nonlinear resistor that plays the role of damping and current limiting.

    The bridge section can be used to limit the ferromagnetic resonance of the voltage transformer well. The main material of the detuner is SiC, which is connected by metal connectors. In the early days, the detuner was connected by aluminum, which was easy to soften and deform due to its low melting point, and has now been basically replaced by copper.

    The main parameters of the detuner are: the passing voltage and resistance, the voltage and resistance value through 5map, the current capacity, the power, the voltage of the mountain elimination system at both ends, etc. Among them, the most important is the flow capacity, which must be selected with PT's neutral point insulation and PT high-voltage fuse capacity when designing.

    We hope we can help you. Please give a thumbs up, thank you!

  2. Anonymous users2024-02-06

    <> detuner (primary detuner, detuning resistor) is a damping device on the primary side of the protection voltage transformer, which is used to detune the resonance in the power grid. It can limit the overvoltage caused by ferromagnetic resonance and the overcurrent flowing through the high-voltage transformer when single-phase grounding or arc grounding.

  3. Anonymous users2024-02-05

    For small home or office power systems, common low-power detuners** are between $1,000 and $2,000. These detuners are usually suitable for home and office equipment such as computers, printers, air conditioners, etc., and can effectively reduce the influence of current harmonics on the equipment. [**Get** and offers].

    For industrial and commercial power systems, the ** of the detuner is usually higher. High-power detuner** is generally around 5,000 yuan to 10,000 yuan. This kind of detuner is suitable for large equipment such as welding machines, frequency converters, motors, etc., which can effectively reduce the impact of harmonics on equipment and power systems.

    In addition, there are some high-end models of the detuner, such as the dynamic reactive power compensation detuner, which may be higher. This kind of detuner can not only eliminate the harmonic current, but also compensate the reactive power in the power system in real time and improve the power factor of the power system.

    The ** of the detuner may vary depending on the manufacturer and region. It is recommended that you conduct more market research and comparison before purchasing a detuner, and choose the right product and manufacturer.

    If you have this need, we recommend professional and innovative Ruide New Energy for you. Founded in 2006 and located in Baoding National High-tech Industrial Development Zone, Hebei Province, Baoding Innovation Ruide New Energy Technology Co., Ltd. specializes in the research and development, production, sales and service of hardware and software products with power automation and power electronics technology as the core. <>

  4. Anonymous users2024-02-04

    It's not the same. The structure and function of the two are different.

    Harmonic protector is to provide multi-functional harmonic protection for electrical equipment. It has the effect of suppressing and absorbing random high-order harmonics and high-frequency noise, pulse spikes, surges and other interferences generated by electrical equipment; Track the voltage waveform at any time, instantaneously filter out the spikes, surges (lightning) and clutter in the power supply, and correct the voltage waveform distorted due to the influence of harmonics; The noise is digested and absorbed, so that the power supply waveform of the power grid becomes smooth and clean, which not only improves the quality of the power grid, but also ensures the normal operation of the electrical equipment.

    The microcomputer detuning device is an instrument placed on the secondary side of PT (so it is also called secondary detuning) to eliminate ferromagnetic resonance. The difference between it and the primary detuner is that the microcomputer detuning is a detuning instrument, which has the advantages of analysis, recording, printing, uploading, etc., but it also has the disadvantages of being only used indoors and having a narrow detuning range (only the resonance of specified frequencies such as power frequency, triple frequency, two-way frequency, and three-way frequency can be eliminated).

Related questions
7 answers2024-04-16

The water distributor is a water distribution device used to connect the water supply pipes of various heating pipes in the water system. >>>More

5 answers2024-04-16

When it is very cold, people will install floor heating in their homes in order to make the indoor temperature not so cold, but the heating generated by floor heating has only one outlet, so in order to make other rooms have heating circulation, so they will think of using water separators. The water separator has the function of adjusting the temperature: the floor heating water separator is used for diversion, if the full boiling water flow is large and the circulation is fast, the indoor temperature will be high; If the valves of each road are half-open, or a single half-open, the amount of hot water in the pipe will be reduced, the water circulation will be slowed down, and the corresponding indoor temperature will be low; If the hot water is turned off and not circulated, it means that there is no heating in the room, so it is said that the indoor temperature can be adjusted by using the floor heating water divider. >>>More

18 answers2024-04-16

It is mainly used for the utilization of waste heat. For example, a chemical plant produces a large amount of high-temperature exhaust gas, and it is a waste to put it directly into the air, so people put some flowing gas or cold water that needs to be preheated outside the hot gas pipe, and heat them to produce high-temperature water vapor or preheat some cold gas. The preheated gas is of course used for chemical reactions, while the high-temperature water vapor produced after cold water is heated can be used for power generation, bathing, cooking, etc., and even heating. >>>More

9 answers2024-04-16

This is the certificate, which plays a security role. Others can't make payments and transfers without it, only if you have it, you can use it to pay and transfer, which plays a role in security. >>>More

15 answers2024-04-16

Internet access. Modem (i.e., modem) is a device for signal conversion between the computer and the first line, consisting of two parts: the modulator and the demodulator, the modulator is the digital signal of the computer (such as files, etc.) is modulated into a device that can transmit the sound signal on the first line, and at the receiving end, the demodulator converts the sound signal into a digital signal that the computer can receive. Data communication between computers can be realized through a modem and a ** line. >>>More