What are the characteristics of tile adhesives, the difference between tile adhesives and adhesives

Tile adhesive is mainly used for pasting decorative materials such as tiles, face tiles, floor tiles, etc., and is widely used in interior and exterior walls, floors, bathrooms, kitchens and other building finishing decoration places. Do you know what are the characteristics of Chenguang tile adhesive? Let's take a look!

1. Advanced technology: the prepared tile adhesive can be mixed with water to form a paste adhesive, and a uniform thickness of the standing layer can be scraped with a serrated trowel, and then the tile can be pushed and pressed into the tile adhesive in the adhesive layer.

2. Save the amount of materials: the adhesive layer of ceramic tile adhesive is thin to only one, which can also produce sufficient adhesion, which proves that tile adhesive can greatly reduce the amount of material used.

3. It can ensure the quality of the project: the tile adhesive has strong adhesion, reduces the opportunity of delamination and spalling, can ensure the quality of the project, avoid the problem of hollowing and cracking after long-term use, reduce the chance of cracks, and enhance the protection function of the wall. Some of the ceramic tile paste dry mortar with hydrophobic and dispersible polymer powder also has the function of anti-seepage and anti-flooding of the wall.

4. Stable product quality: the factory is pre-mixed with dry mixing, and the quality is stable. Add water and stir, simple and convenient, and the quality is easy to control.

5. Conducive to environmental protection: tile adhesive can reduce waste, no toxic additives, and fully meet the requirements of environmental protection.

It can increase the bond strength of tiles and walls.

The difference between tile adhesive and adhesive pro! Hello, I am glad to answer for you<> The difference between pro-ceramic tile adhesive and adhesive is as follows: 1. Ceramic tile adhesive is mainly used for pasting ceramic tiles, face tiles, floor tiles and other decorative materials, and is widely used in interior and exterior walls, floors, bathrooms, kitchens and other building decoration places.

Tile adhesive is indispensable in home decoration, in fact, few people will pay attention to these accessories, but in the future use process, it is very likely that the tile will fall because of some inferior tile adhesive, so even if the accessories we have to understand, if necessary, choose the corresponding brand products. 2. Since the tile is to be laid, it must be a material that can bond the tile and the ground, that is, the tile adhesive. Tile adhesive is an environmentally friendly and non-toxic composite bonding material.

Tile laying is a technical job, and the slightest carelessness will cause a discount on aesthetics, so this easy to apply tile adhesive is very popular. 3. In the past, the ceramic tile and the ground were connected with cement, so the laying process is very complicated, and the laying error is relatively high, it is easier to cause problems caused by soaking bricks or sprinkling water enough, and the viscosity is not as good as the viscosity of the tile adhesive, so the use of ceramic tile adhesive can greatly improve the bonding strength between the finishing material and the substrate. Because of the high strength of tile adhesive and the small amount of material learned, it consumes much less than cement and is very environmentally friendly.

In addition, tile adhesive is also a non-polluting and environmentally friendly product. Hope mine can help you <>

Do you have any other questions?

Many people may not know what types of exterior wall tiles, but we all know that the current ceramic tiles are getting thinner and thinner, and the process requirements for tile paving are getting higher and higher, so it is necessary to choose the exterior wall tile adhesive, so what are the characteristics of the exterior wall tile adhesive, this article will take you to understand!

1. The adhesive is used for the exterior wall finish of the imitation blind wheel, the adhesive layer is thin, the adhesion is large, and the material is uniform. It will not cause hollowing and other phenomena. The impact resistance of the pen paint is large, and the decorative effect is also good; 2. The composition is small particles, and the binder can be redispersed when exposed to water, so it can improve the workability of the mortar, increase the water retention of the mortar, and keep the cement hydrated for a period of time.

Advantages of façade tiles.

1. The appearance of exterior wall tiles.

Regardless of whether the surface of the exterior wall tiles is glossy or matte, the surface is smooth and flat or the surface is rough, that is, it has different textures.

2. The texture of the exterior wall tiles.

Exterior wall tiles have good durability and texture, and bright colors have rich decorative effects, easy to clean, fire prevention, corrosion resistance and low maintenance costs. In some areas where environmental pollution is relatively large and there is a lot of air dust, it undoubtedly has a very big advantage.

disadvantages of exterior wall tiles.

1. The cost and process of exterior wall tiles.

The exterior wall bricks are put into production for the first time, the cost is higher, and the paste requirements are high, so the construction is difficult, if the construction master is not too hard, it is easy to cause falling off and hurting people, and the waterproof material has to solve the waterproof problem.

2. Environmental protection and water seepage of exterior wall tiles.

From an environmental point of view, the use of acid in the cleaning process of exterior wall tiles will cause pollution to the atmosphere. Once the problem of water seepage occurs on the exterior wall of the face brick, it is difficult to find the location of the water seepage, and it is not a simple matter to repair it in the future.

Summary: Although exterior wall coatings can replace exterior wall tiles in terms of function and effect, but at present, from the perspective of the construction industry, exterior wall tiles are still the darlings of developers, therefore, it has led to the rise of exterior wall tile adhesives.

Do you know how to use tile adhesives? Ourstile adhesivesHow to use some methods and skills our friends can see how to introduce, as well as how to use our tile adhesive and some are to introduce what ingredients make up the product of tile adhesive, what are its advantages, and what are the precautions for our friends in how to use ceramic tile adhesive.

First, the characteristics of ceramic tile adhesive introduction.

1. Tile adhesive, also known as tile adhesive or tile adhesive, as well as tile adhesive, is divided into ordinary type, polymer type, heavy brick type, mainly used for pasting ceramic tiles, face tiles, floor tiles and other decorative materials, widely used in interior and exterior walls, ground, bathroom, kitchen and other building finishing decoration places.

2. Tile adhesive is a non-toxic, odorless, non-polluting environmental protection product. It can greatly improve the bonding strength between the finishing material and the substrate, anti-slip, has good water resistance, acid and alkali resistance and aging resistance, can withstand the test of dry and wet alternation and cold and hot alternation, and completely solves the disadvantages of directly pasting with cement.

Second, the use of tile adhesive.

1. Mix and stir a package of materials according to the specified water distribution ratio, stir until it is uniform and free of agglomeration, let the slurry stand for 3 to 5 minutes, stir again, and then use.

2. Choose the appropriate toothed scraper to ensure that the effective pasting area is at least 65% of the area of the tile.

3. Use a special toothed scraper to fill the base surface of the mortar with a thickness of 3 to 5 mm (that is, the thickness of the slurry on the tile), and then use the side of the scraper with a tooth shape to pull out a stripe in a straight line or S shape, and the scraper plane and the base plane intersect at 45 degrees to 60 degrees. Tiles do not have to be soaked in water.

4. Just paste it on the wall and ground in the order of arrangement and compact. And adjust the position of the tiles within the stipulated time. Undried adhesive can be removed with water, but can only be removed mechanically after curing.

5. The most important thing is the ratio of adhesive and water, which is generally adopted, and only a little water is enough. After mixing it, it is stirred evenly, and then it can be carried out to the next step, that is, construction.

6. If you use tile adhesive, you don't need to use the method of dipping bricks like cement, you only need to paste it on the wall and ground in order and compact it. However, during the bonding process, it is necessary to ensure that the binder covers most of the surface of the tile.

3. Precautions for tile adhesives.

1. Before construction, it is necessary to confirm the flatness of the working face.

2. Clean the finish with a damp sponge or cloth before the glue is dry.

3. Do not mix the dried glue with water before use.

4. Pedestrians or caulking can be carried out only after 24 hours of paving.

5. If it is used for large tiles and stones with low water absorption, it is recommended to use it with Aoneng F90-4 mortar companion, and the effect is more ideal.

6. This product is suitable for use in an environment of 5 40 degrees Celsius, and should not be constructed under rain.

This year-old wide chain is the introduction of some of the features and benefits of our tile adhesive, and what are some of the correct ways to use our tile adhesive, and what are the precautions for tile adhesive in the process of use, if friends still want to know more decoration information, **** thank you!

The necessity of tile adhesive used in home decoration.

"Tile adhesive" is widely used as an indispensable decoration material in home decoration, and its cement-based adhesive composed of polymers and other materials can be used in almost all kinds of ceramic tiles with special formulations. The use of tile adhesive makes the decoration of kitchen and bathroom have the following advantages:

Good water retention, not easy to produce hollow drum;

High bond strength, no falling off;

Reduce the load-bearing capacity of the building, from the amount of cement required by traditional paving from 1 1 18kg per square meter to 4 5kg of tile adhesive, so as to reduce the occurrence of building settlement and cracking;

The thickness of tile adhesive is much smaller than that of traditional cement, saving valuable space and location;

The on-site construction environment is clean; Ordinary plastic drums can be used to mix materials;

Tile adhesive construction is very convenient; No need to soak bricks and wet walls;

In a new house that has just moved in, the cement paste tiles have a hollow drum, which causes the tiles to fall off after a long time; The tile paving without reserved gaps ...... burst the corners after experiencing the temperature differenceIn real life, we often encounter the above situation: the house that has spent several months and spent tens of thousands, hundreds of thousands, or even millions of dollars to renovate has not yet come out of the freshness of moving in, and it encounters a lot of troubles in the kitchen, bathroom and other spaces. Of course, there are also some consumers who do not choose the right brand and high-quality products, which leads to some consumer problems.

Therefore, experts recommend that we not only use it correctly, but also buy it correctly, and truly take responsibility for our new home from the "inside", and choose brands and products that can really benefit you in the long run. Choose the Oria tile adhesive series.

Excellent quality: tasteless, non-toxic, environmentally friendly; Tiles never fall; Strong adhesion, high flexibility, resistance to displacement and settlement.

Save time and money. With "Oria" tile adhesive, each worker can complete about 30 40 square meters of tile paving work per day, while the traditional method of construction, each worker can only complete 5 8 square meters of paving per day. Savings of more than 50% per square meter of tiles can be achieved, and the more you use, the lower the cost.

Wide range of applications. OLY tile adhesive products have a wide range of applications, which can be applied to the interior decoration of toilets, kitchens, etc., the exterior decoration of gardens, balconies, etc., as well as the decoration of walls and floors.

Tile adhesive is mainly used for thin construction, and the adhesion is strong. At present, the wall vitrified tile generally uses tile adhesive, but it is not guaranteed that it will not fall off.

Advantages of bindersThe difference between binders and cement mortar.

The reason why tile adhesive is used by many people is because it has many advantages.

For example, high bonding strength, good workability, good water retention, long adjustment time, tile does not fall, water resistance, high temperature resistance, freeze-thaw resistance, cold and heat change resistance, waterproof and impermeability, anti-aging performance, durability and convenient construction, ergonomics, high economic benefits and other advantages and are loved by consumers.

Tile adhesive, also known as face tile binder, is made of cement, quartz sand, polymer cementing material with a variety of additives through mechanical mixing. Tile adhesive is mainly used as an adhesive for bonding tiles and face tiles, also known as polymer tile bonding mortar. [1] This tile adhesive completely solves the problem that there is no high-quality special adhesive material to choose from in the pasting construction of ceramic tiles, floor tiles and other materials, and provides a new and reliable ceramic tile special adhesive product for the Chinese market.

Product features 1. High bonding strength and fast hardening speed, which can greatly improve the service life and decorative effect of various paving materials. 2. The construction is convenient, and it can be used only by processing an appropriate amount of water and stirring. The tiles to be pasted do not need blisters, and can be pasted directly.

3. Excellent compressive and tensile strength, water resistance, alkali resistance and weather resistance, not affected by the environment. 4. Good workability, good water retention, workability and flow resistance. During the bonding process, the tile can be adjusted for 10 minutes and operated for 60 minutes.

5. The ultra-thin layer construction can be realized, and the coating thickness is less than half of the traditional process, which saves costs and reduces the shrinkage rate, and will not cause the cracking and falling off of the decorative adhesive surface due to force. 6. Non-toxic, tasteless, non-polluting, it is a real green and environmentally friendly product.

With the popularization of dry mortar, the use of dry mortar is becoming more and more common, and the main tile adhesives on the market are as follows:

1. It is used for bonding marble, cultural stone and other stone or large ceramic tiles;

2. It is used for sticking tiles on the external insulation (the base layer is deformed large) or some ceramic tiles with small water absorption;

3. It is used for the bonding of ordinary ceramic tiles;

4. It is used for the bonding of floor tiles.

At present, there are many problems in the promotion and use of ground tile adhesive, first of all, the construction conditions, when the ground tile of foreign countries is pasted, the flatness of the base is better, so the trowel method can also be used for construction, the current ground flatness of the domestic is very poor, more is the foundation of a structure, and the error is very large. The second is the standard problem, JC T547 standard name is for the ceramic wall and floor tile binder, has included the ground tile binder, if the standard production is too high, the traditional wall tile binder cement dosage is relatively large, and there is a certain amount of liquid glue, there is a certain cost, and the floor tile bonding adopts the dry paving method, the cement dosage is relatively small, and there is no need to add glue, so the cost is lower. Another reason is that the thickness of the mortar for the current floor tile bonding is at least 3 cm or more.

Finally, there is a problem of concept, usually people think that the tile paste on the ground does not have high requirements for bonding strength, even if the bonding is not firm, it is at most hollow, and it will not cause engineering quality accidents due to falling off.