How to take care of the leaf stage of bowl lotus can promote flowering

Planting can be done before and after Qingming, first creeping a layer of 3-4 cm thick humus at the bottom of the tank, and mixing in some well-rotted cake fertilizer. Then pad into the culture soil (5-6 cm along the mouth to store water) and a small amount of water, adjust into a thin paste, and then the small lotus root top bud downward, along the edge of the tank obliquely planted into the mud, so that the tail section upturned, slightly exposed mud surface, after planting, placed in the sunny place to receive sunlight for 2-3 days, so that the mud shrinks, fixes the lotus root, improves the soil temperature, in order to facilitate germination. At this time, add a small amount of water, after the floating leaves grow, then slightly increase the water level, until the vertical leaves grow, with the elongation of the petiole and gradually fill the tank with water, and add some water every day.

During the growth period of bowl lotus, no further fertilization is required. Excessive fertilization can lead to fertilizer damage. The bowl lotus is delicate and susceptible to frost damage.

In winter, the bowl should be moved indoors to the sun, and a small amount of water should be added every week. Wait until the next year's Qingming to turn over the pot, take out the seed lotus, and replant.

Rice field planting early lotus, the growth period is short, the planting density should be appropriately increased, and the general row spacing is about 1 meter per meter. Lotus root field irrigation should be mastered"Anterior shallow - middle deep - posterior shallow"Principle, do not cut off the water. Top dressing usually takes about 2 times, one at the stage of 1 2 leaves and one before the closure of the row.

In addition, in order to prevent the lotus whip from penetrating the ridges, the direction of its growth should be checked and adjusted in time. If you find that it is facing the ridge side, you should choose a sunny afternoon, pick up the soil on the side of the lotus whip, and then gently hold up the lotus whip with your hand and change its orientation, and then bury it in the mud.

Bowl lotus leaves after waiting for about 10-20 days will open flowers, bowl lotus is a perennial herbaceous plant, the leaves are green, the petals are beautiful and moving, the flowering period is in June to September every year, the common colors are red, white and pink, when cultivating bowl lotus, to provide it with sufficient light, during flowering to apply 2-3 times of phosphorus and potassium fertilizer.

The standing leaves of the bowl lotus indicate that the flowers are about to open, and it takes 10-20 days to wait for the plant to bud, and the growth cycle of the bowl lotus is relatively short, from planting to flowering only 60 days, and the flowering period is in June to September every summer.

Bowl lotus is a kind of light-loving plant, the flowering period has high requirements for the environment, it needs to be placed in a bright place, so that the plant receives sunlight, and spray water once a day to ensure that the water is sufficient, so that the bowl lotus flowers open vigorously.

Bowl lotus consumes more nutrients during flowering, it is necessary to apply fertilizer once a month to Yuling, use well-rotted organic fertilizer or cake fertilizer, ensure sufficient nutrients, pay attention to less nitrogen fertilizer during the flowering period, so as not to grow branches and leaves of bowl lotus, prolong the flowering time.

After the lotus flowers wither, you can cut off the residual flowers to avoid consuming too many nutrients, and cut off the flower stems together, and then inject new water into the pot, and the water level is controlled at one-third of the rhizome, so as to avoid waterlogging.

Bowl lotus standing leaves means fast flowering, and after 4 or 7 leaves have grown, the flower buds will gradually open. When maintaining the bowl lotus, it is necessary to do a good job of water replenishment and frequent water changes. Control the growth temperature of bowl lotus between 23 and 30, and reduce the addition of water in winter.

Provide sufficient sunlight for bowl lilies, and do a good job of shade protection in summer.

Bowl lotus standing leaves means fast flowering, and after 4 or 7 leaves have grown, the flower buds will gradually open. As a perennial herbaceous plant, the bowl lotus has emerald green leaves. The petals of the bowl lotus are beautiful and moving, blooming in June and September every year, and the common colors of the petals are red, white and pink, and they will produce oval-shaped seeds.

As an aquatic plant with a cover, bowl lotus needs sufficient water supplementation. Make sure that there is enough water in the pot, and the depth of the water does not overflow the leaves of the orange bowl lotus. The water needs to be changed frequently to ensure that the water is clear.

Dirty water quality will breed a large number of bacteria, causing the root rot of the bowl lily and affecting the growth of the plant.

The suitable growth temperature of bowl lotus is between 23 and 30, and the temperature is suitable, which can promote the continuous growth of bowl lotus. In summer, when the temperature rises and the environment is dry, you can increase watering and sprinkling water in the air to cool down and moisturize. In winter, when the temperature drops, it is necessary to reduce the water in the pot to avoid frostbite caused by low temperatures.

When caring for bowl lilies, it is necessary to provide sufficient light. Maintaining the bowl lotus in a ventilated and bright place and allowing the leaves to continuously photosynthesize can effectively promote the opening of the bowl lotus petals. In summer, the sun is strong, and it is necessary to give proper shade protection to the bowl lotus to avoid the leaves from being sunburned and the phenomenon of yellow leaves.

A poor variety of hidden varieties can show flower buds after growing 4 or 7 vertical leaves.

When the water temperature is below 20 degrees, the seeds germinate and grow too slowly. When soaking seeds in small quantities at home, they can be put into a thermos flask to keep the temperature imitation. The speed of germination is also related to the temperature, the temperature is 30 degrees, and the germination can be germinated in 3-5 days, and the germ sticks out from the breach.

During this period, the water should be changed every 1-2 days, and under normal circumstances, as long as the seed coat can absorb water and swell, it will germinate.

1. Light: If you want the hydroponic bowl lotus to bloom, you must let it receive at least 5 hours of light every day. 2. Fertilization:

Apply rotted cake fertilizer to the pond mud to provide the bowl lily with the nutrients it needs to bloom. 3. Pruning: Cut off the leaves that grow too densely.

4. Temperature: control the ambient temperature above 28 to promote the differentiation of lotus buds.

1. Lighting conditions

Hydroponic bowl lotus needs sufficient light during the growth process, if you want the bowl lotus to bloom, you should place the plant in a bright light environment, let it receive at least 5 hours of light every day, promote the flower bud differentiation of bowl lotus, but in the middle of summer to do a good job of shading measures for bowl lotus.

2. Fertilization management

Bowl lotus is a fertilizer-loving plant, hydroponic cultivation of bowl lotus, need to first apply rotten organic fertilizer or peanut bran to the soil at the bottom of the pot as a base fertilizer, to provide the nutrients needed for the growth of bowl lotus, and before the bowl lotus flowers, it is necessary to mix the rotten cake fertilizer into the soil to promote the rapid flowering of bowl lotus.

3. Pruning

If you want to flower quickly, you need to cut off the leaves that grow too densely, so as not to affect the respiration of the bowl lotus, and can avoid the loss of excess nutrients.

4. Suitable temperature

Bowl lotus has higher temperature requirements, it will sprout in the environment of 8-10, and will grow vigorously when the temperature is 23-30, if you want to flower quickly, you can place it in a warm room, and control the indoor temperature above 28 to maintain the normal growth of bowl lotus.

In order to make the bowl lotus flower, it is necessary to ensure that the growth space is large enough, and the diameter of the breeding container should be greater than 30cm, so as to avoid overcrowding and causing the root system to grow and affect the flowering. The substrate should be disinfected before use, and pond soil can be purchased.

When planting, well-rotted organic fertilizer should be added to the sediment, and phosphate fertilizer should be added before flowering. In addition, daily maintenance should be placed in a sunny position, and should not be maintained in a shady place for a long time.

Select the container

When planting bowl lotus, it is best to choose a larger diameter water tank, the diameter is not less than 30cm, and the later stage should gradually replace a larger water tank with the growth of the plant.

If multiple bowl lilies are planted in the same tank, you need to pay attention to the number of planting, too many will cause the growth space to be too crowded, their roots will be entangled, compete for nutrients with each other, and the number of leaves will be relatively large, which is easy to affect flowering after blocking the sun. Therefore, it is necessary to plant reasonably densely to ensure that there is enough growth space to be able to bloom smoothly.